1 October 2012 in NDT & E International
12 January 2015 in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
Ultrasonic guided waves are one of the primary methods being investigated for structural health monitoring of plate-like components. A common practice is to collect measurements from a sparse transducer array using the pitch-catch method, which enables interrogation of defects from multiple directions. Thus, knowledge of how guided waves scatter from defects is very useful for detection, localization, and characterization of damage. One way to describe scattering patterns is with a matrix indexed by incident angle and scattered angle, and sparse array measurements essentially sample this matrix. A methodology is proposed in this paper to estimate the complete scattering matrix from these limited array measurements. First, recorded array signals are compensated for geometric spreading loss, wave packet spreading loss, and transducer differences. Initial scattering values are then extracted from the scattered wave packets after baseline subtraction and are augmented using transducer reciprocity and any a priori knowledge of defect geometric symmetry. Finally, radial basis function interpolation is performed on these values to obtain the complete scattering matrix. Scattering matrices are generated from experimental data by cutting notches of different lengths originating from a through-hole in an aluminum plate specimen that is instrumented with a sparse transducer array. The methodology is validated by laser vibrometry measurements performed on a nominally identical specimen for one notch length.
1 January 2019 in Ultrasonics
1 November 2024 in The Journal of the Acoustical Society of America
Fluid-saturated porous media plays an increasingly important role in emerging fields such as lithium batteries and artificial bones. Accurately solving the governing equations of guided wave is the key to the successful application of ultrasonic guided wave nondestructive testing technology in fluid-saturated porous media. This paper derives the Lamb wave equation in layered fluid-saturated porous materials based on Biot theory and proposes the spectral method suitable for solving complex wave equations. The spectral method reconstructs the fundamental wave equations in the form of a matrix eigenvalue problem using spectral differentiation matrices. It introduces boundary conditions by replacing corresponding rows in the wave equation matrix with stress or displacement in matrix form. For complex differential equations, such as the governing equations of guided waves in porous media, the spectral method has the significant advantages of faster computation speed, less root loss, and easier encoding process. The spectral method is used to calculate the acoustic field characteristics under different boundary conditions and environments of the layer fluid-saturated porous media. Results show that the surface treatment details and environment of fluid-saturated porous materials play an important role in the propagation of guided waves.
22 June 2022 in Journal of Applied Physics
Acoustoelasticity or the change in elastic wave speeds with stress is promising for prestress measurements in waveguides. The theory of guided wave propagation in initially isotropic materials with arbitrary cross sections and under homogeneous biaxial stresses is developed using Semi-Analytical Finite Element (SAFE) modeling in this article. Based on the anisotropic effect induced by the applied biaxial load, an inversion method for biaxial force was developed. The acoustoelastic response for a particular mode and frequency is described by only two constants, which can be determined from known uniaxial loading experiments. The magnitude and direction of the biaxial force can be obtained by further coefficient fitting. Stress inversion can be obtained without considering the shape of the cross section and applies to multiple guided wave modes. The inversion has been verified by the results of SAFE and 3D Sweeping Frequency Finite Element Modeling (SFFEM) method, and the Mean Absolute Errors of stresses obtained by different methods are all within 1%. The 3D SFFEM was combined with the Matrix Pencil Method using the time domain information to extract the dispersion curve. Unlike previous finite element modeling, here the inheritance of the solution between the two solvers was set instead of approximating static load conditions by shortening the guided wave travel time. It guarantees the steady state of the force in the time-variant study, ensuring the high precision required for the study of the acoustoelastic effect.
1 October 2017 in Mechanical Systems and Signal Processing