22 June 2022 in Journal of Applied Physics
Acoustoelasticity or the change in elastic wave speeds with stress is promising for prestress measurements in waveguides. The theory of guided wave propagation in initially isotropic materials with arbitrary cross sections and under homogeneous biaxial stresses is developed using Semi-Analytical Finite Element (SAFE) modeling in this article. Based on the anisotropic effect induced by the applied biaxial load, an inversion method for biaxial force was developed. The acoustoelastic response for a particular mode and frequency is described by only two constants, which can be determined from known uniaxial loading experiments. The magnitude and direction of the biaxial force can be obtained by further coefficient fitting. Stress inversion can be obtained without considering the shape of the cross section and applies to multiple guided wave modes. The inversion has been verified by the results of SAFE and 3D Sweeping Frequency Finite Element Modeling (SFFEM) method, and the Mean Absolute Errors of stresses obtained by different methods are all within 1%. The 3D SFFEM was combined with the Matrix Pencil Method using the time domain information to extract the dispersion curve. Unlike previous finite element modeling, here the inheritance of the solution between the two solvers was set instead of approximating static load conditions by shortening the guided wave travel time. It guarantees the steady state of the force in the time-variant study, ensuring the high precision required for the study of the acoustoelastic effect.
19 May 2026 in Optics & Laser Technology
9 March 2026 in SSRN Electronic Journal
The vertical arrangement of xenon lamps along the direction of gravity represents the most prevalent implementation of laser-sustained plasma (LSP) light sources, which features a longer working life. However, the vortices formed around the LSP plume tend to cause periodic energy exchange between the plasma and the surrounding filling gas. This periodic behavior will lead to fluctuations in the radiation flux in LSP light source applications. This paper reveals the mechanism by which the instability of LSP light sources is suppressed under a gravity direction setting through a combination of experimental observations, phase space dynamics analysis and numerical simulations. Specifically, shadowgraphy was employed to visualize the plume oscillation state at different electrode-plasma distances along the gravitational direction. It was found that the periodic plume oscillation gradually weakens as the plasma approaches the upper anode. The oscillation disappeared when the continuous decrease fell below a certain threshold. Subsequently, the phase space reconstruction of the LSP radiation intensity time series was performed, revealing phase space reconstruction curves for different plume states. The three-dimensional transient fluid model revealed the distributions of temperature, density, and velocity in oscillatory, critical, and steady states. Simulation calculations showed that under the guiding and stabilizing effect of the upper anode in proximity to the plasma, the velocity of the heated ascending gas flow is effectively suppressed, and the instability of the LSP light sources is eliminated. This work not only advances understanding of the internal fluid dynamics of LSP light sources but also provides a reference for the performance optimization of high-stability light sources in optical detection systems.