18 November 2021 in Journal of the Optical Society of America B
An experimental, laboratory-scale optical fiber drawing tower based on CO laser heating has been developed and used to fabricate speciality optical fiber. The CO laser was utilized in a symmetric four beam heating system. The localized and responsive heating time of the laser-based furnace was beneficial for manufacturing crystalline core fibers, specifically, silicon core optical fibers. Moreover, the specific absorption properties of the CO laser radiation in silica have been evaluated with the aid of finite element modeling. In comparison to the more traditional laser, CO lasers were found to improve temperature uniformity and heating times while minimizing surface evaporation.
20 April 2024 in Journal of the American Ceramic Society
As demand for customized specialty fibers grows, standardized production methods face challenges. This article reviews industry standards and discusses potentially disruptive techniques that enable rapid prototyping and fabrication of optical fiber devices. Furthermore, we showcase laser powder deposition's (LPD) potential for additive manufacturing (AM) of customized glass structures. In the case of, for example, fiber preforms, although the feasible size is smaller than the industry standard, utilizing laser‐based manufacturing techniques for a small batch production presents an attractive avenue for rapid prototyping and expedites material and design optimization. In the realm of AM of glass, LPD offers numerous benefits, including minimal shrinkage, high densification, and the ability to tailor glass composition to achieve desired optical properties. The article reviews the latest achievements and highlights future directions in this technology.
27 September 2023 in Optica
The pursuit of advanced fiber laser technologies has driven research toward unconventional manufacturing techniques. In this work, we present an erbium-doped fiber laser made using powder-based additive manufacturing. An Er3+/Al3+ co-doped silica glass rod was printed using laser powder deposition and then used as the core material in a fiber preform. The fiber drawn from the preform exhibited the complete, desired functionality linked to Er3+ doping. To demonstrate this, a standing wave laser cavity was formed with the feedback attained from the cleaved ends of the manufactured fiber. The high quality of the fiber is showcased through a low background loss, single-mode operation, a 9.4% laser slope efficiency, and an output of 4.5 mW, limited by the available pump power. This proof-of-concept opens up promising areas for rapid fabrication and development of high-performance fibers and fiber lasers.
16 March 2022 in Optical Materials Express
Additive manufacturing of high-quality macroscopic fused silica glass structures, with deposition rates of up to 1.2 mm3/s, is presented. Three co-axial nozzles were used to avoid the so-called quill effect. Homogeneous, crack-free, multilayer, as well as free-standing objects were printed using cluster-free sub-µm powders delivered to a CO2 laser-induced melt pool. Structures with an overhang of up to 45° were possible to print. Laser post-processing was used to improve the surface roughness and transparency. This system can be suitable for fabrication of advanced optical elements and devices, such as waveguides or fiber preforms.
2 June 2022 in Optical Materials Express
We demonstrate a method for rapid prototyping of optical fibers. Silica-based glass rods were 3D printed using laser powder deposition. Different doping of the 3D printed rods is evaluated, including alumina, titania, and erbium-doped glass. The rods were subsequently used as the core material in preforms with optical fibers drawn using a laser-based draw tower. A transmission loss of 3.2 dB/m was found for a fiber with 1 wt% titania doped core and pure silica cladding. Using this fabrication method, prototyping from powder to optical fiber could be achieved within a few hours.
23 August 2021 in Optical Materials Express
Fused silica glass is a commonly used high-performance material. However, due to the high temperature necessary for its production, manufacturing can also be challenging and costly. An attractive approach is additive manufacturing through laser cladding. Laser cladding of transparent fused silica was achieved using a CO2-laser to locally melt the substrate while injecting a stream of fumed silica glass powder into the melt-pool. By the described technique, it is possible to manufacture fully sintered silica glass with deposition rate up to 29 mm3/min. In this work we have studied deposition dynamics and influence of different process parameters on the final deposition quality.