We report the synthesis of Ag nanocubes by using a sodium sulfide assisted solvothermal method. Small edge-length nanocubes (32 and 44 nm) were obtained at 145 and 155 °C reaction temperature in the synthesis process. The refractive index sensitivity of synthesized nanocubes was investigated with an aqueous solution of glucose. The refractive index sensitivity of 161 nm per RIU was found in the colloidal dispersion of nanocubes. On the LSPR chip made by immobilization of nanocubes on the (3-aminopropyl)trimethoxysilane modified glass coverslip, the obtained sensitivity was 116 nm per RIU. Detection of formaldehyde in water and milk samples was also performed with nanocubes of edge-length of 44 nm. Formaldehyde detection was performed by utilizing the interaction of the aryl amine of 4-aminothiophenol immobilized on the nanocubes and electrophilic carbon atom of the formaldehyde. In water and in diluted milk, the formaldehyde sensitivity of 0.62 and 0.29 nm μM−1 was obtained, respectively.
6-fluoro-3-(4-piperidinyl)-1,2-benzisoxazole. HCl (FPBH), a substituted benzisoxazole derivative, was prepared from isonipecotic acid and characterized using various spectroscopic techniques. Using electrochemical examinations such as potentiodynamic polarisation (PDP) and electrochemical impedance spectroscopic (EIS) technique, the corrosion mitigation capabilities of this compound for mild steel (MS) in 0.5 M HCl medium were investigated. Theoretical studies were performed using quantum chemical calculations and density functional theory (DFT). PDP results exhibited the mixed-type behavior of FPBH and showed a maximum efficiency of 94.5 % at 1 × 10−3 M. The development of a protective adsorbed layer of FPBH decreases the corrosion current density (icorr) and corrosion rate (CR). The EIS technique revealed that the rise in the charge transfer resistance (Rct) values and reduction in the thickness of the double-layer capacitance (Cdl) reflected the drop in corrosion rate. The adsorption of FPBH took place through physisorption by conforming Langmuir's isotherm. The DFT method was performed on the optimized structure of FPBH to get additional evidence on the action mode of FPBH with the metal surface.
25 December 2021 in Journal of Materials Science: Materials in Electronics
In this work, we present the synthesis and surface immobilization of Au nanostars, Au nanocubes and Au nanorods for localized surface plasmon resonance (LSPR)-based refractometric sensing applications. Au nanostructures exhibiting LSPR peak positions in 500–900 nm spectral range were prepared by seed-mediated synthesis method. The refractive index (RI) sensitivity of all these nanostructures in the colloidal solution were measured and the sample exhibiting highest sensitivity in each category were immobilized on the glass substrate. The surface immobilized nanostructures were investigated for RI sensing. Au nanostars having LSPR peak position at 767 nm exhibited highest RI sensitivity of 484 nm/RIU in solution and 318 nm/RIU on the substrate. This study gives an outline for selecting the Au nanostructures for developing plasmonic sensing platforms.
The stimulated-emission-pumping/resonant 2-photon ionization (SEP-R2PI) method was used to determine the intermolecular dissociation energies D0 of jet-cooled 1-naphthol(1NpOH)·S complexes, where S is a linear molecule (N2, CO, CO2, OCS, N2O, and ethyne) or symmetric-top molecule (2-butyne) that contains double or triple bonds. The dissociation energies D0(S0) are bracketed as follows: 6.68 ± 0.08 kJ/mol for S=N2, 7.7 ± 0.8 kJ/mol for CO, 12.07 ± 0.10 kJ/mol for CO2, 13.03 ± 0.01 kJ/mol for N2O, 14.34 ± 0.08 kJ/mol for ethyne, 15.0 ± 1.35 kJ/mol for OCS, and 29.6 ± 2.4 kJ/mol for 2-butyne. The minimum-energy structures, vibrational wavenumbers, and zero-point vibrational energies were calculated using the dispersion-corrected density functional theory methods such as B97-D3 and B3LYP-D3 with the def2-QZVPP basis set. These predict that N2 and CO are dispersively bound Face complexes (S bound to a naphthalene Face), while CO2, N2O, and OCS adsorb into the “Notch” between the naphthyl and OH groups; these are denoted as Notch complexes. Ethyne and 2-butyne form Edge complexes involving H-bonds from the —OH group of 1NpOH to the center of the molecule. The presence of a double or triple bond or an aromatic C=C bond within S does not lead to a specific calculated geometry (Face, Notch or Edge). However, a correlation exists between the structure and the sign of the quadrupole moment component Θzz of S: negative Θzz correlates with Face or Notch, while positive Θzz correlates with Edge geometries.