5 August 2025 in Cement Wapno Beton
This paper presents the results of research on the properties of CEM II/A-F cements containing fine fraction of material from concrete rubble processing plant, as one of the main constituents of cement. The material obtained from concrete recycling plant was ground to produce a constituent that, according to EN 197-6, can be classified as constituent F. A portion of this material was further thermally processed by calcination at three different temperatures: 400 °C, 600 °C and 700 °C. The tests demonstrated a positive influence of thermal treatment on the properties of the binders, despite the relatively low content of hardened cement paste in the recycled material. A particularly beneficial effect, relative to the reference cement containing siliceous fly ash, when constituent F calcined at 600 °C was found.
12 October 2026 in SSRN Electronic Journal
This research assesses the use of fly ash from fluidized bed combustion (FBC) of hard coal or lignite as active pozzolanic additives in ternary gypsum-cement systems. The goal was to reduce the moisture sensitivity of traditional gypsum binders and increase their mechanical strength. Various compositions were formulated by replacing parts of hemihydrate FGD gypsum with ordinary Portland cement and FBC fly ash at different ratios. Conventional siliceous fly ash (SA) served as a reference. The physical and mechanical properties of the hardened binders were evaluated for up to 360 days, focusing on compressive strength, water resistance (softening coefficient), and dimensional stability. Findings were supplemented with XRD, SEM-EDS, and DTA/TG/DTG analyses. The results show that FBC fly ashes exhibit significantly higher reactivity than SA due to their porous structure and elevated levels of reactive alumina, free lime, and reactive SiO2. Utilizing FBC ash instead of SA improved the binder's microstructure by generating more C–S–H phase and ettringite. This led to a 50% increase in compressive strength and notable water resistance, with the softening coefficient reaching approximately 0.85. However, compositions allowing excessive ettringite formation exhibited expansion exceeding 0.8%, causing destructive phenomena. Based on these insights, the optimal proportions of the ternary binder components were determined to effectively control volumetric changes. Consequently, this study demonstrates the potential to sustainably recycle FBC ash as industrial waste, producing eco-friendly, moisture-resistant sulfate binders with a minimized carbon footprint.