This article demonstrates the fabrication and characterization of a low-cost, energy-efficient, easy-to-fabricate SnS/MXene memristor in which an SnS/Ti $_\text{3}$ C $_\text{2}$ T $_\textit{x}$ active layer is sandwiched in between two copper electrodes. The device has been showing substantial merits with an experimental $ \textit{R}_\text{off}$ : $ \textit{R}_\text{on}$ ratio of $\sim$ 22 with good cyclic stability, exceptional reproducibility, and data retention capability up to 1000 cycles. This article explains the detailed physics governing the various regions of the proposed memristor characteristics in terms of the dual ionic conduction mechanism. Furthermore, the article explains the memristor’s asymmetric behavior using the concept of the trapping and de-trapping of charge carriers. Real-time band structures extracted using sophisticated ultraviolet photoelectron spectroscopy (UPS) strongly support the claims reported in this article. Finally, this article concludes with a practical application of the fabricated device as a low-cost, tunable asymmetric clock generator circuit.
4 September 2023 in IEEE Photonics Technology Letters
In this letter, a solution combustion synthesized (SCS) CeO2 -based high-performance wideband photodetector (PD) is reported. The SCS method was categorically chosen to narrow the bandgap of synthesized CeO2 via nitrogen or carbon doping and employ the higher level of oxygen vacancies in photodetection. The PD's structure is composed of p-Si/Al/CeO2 /Ag layers, where T1 and T2 are Al and Ag -based electrodes, respectively. The fabricated PD exhibits excellent photodetection capability between 350 nm to 850 nm with a peak responsivity of 12.42 A.W−1 at 411 nm. The highest measured value of external quantum efficiency (EQE) and specific detectivity ( $D^{*}$ ) of the PD are 24.65% at 401 nm and $3.57 \times 10^{10}$ Jones at 501 nm, respectively. The fabricated PD's rise and fall times are measured to be approximately 27 ms and 16 ms, respectively. An experimental application of the proposed PD through a simple visible lightwave communication (VLC) system is also shown.
26 January 2024 in ACS Applied Electronic Materials
This article reports a resistive chip-enabler logic inverter and an active-low 2 : 1 multiplexer based on Ag/SnO2−x/ITO structured pressure-sensitive memristive devices for in-memory computing applications.
This Letter presents the fabrication and characterization of a 2D SnS memristor, proposing its integrate and fire (I&F) model as a potential hardware implementation of neuronal somatic behavior. The memristor comprises a thin layer of tin (II) sulfide (SnS) sandwiched between copper (Cu) electrodes on a silicon (Si) substrate. This structure exhibits an impressive Roff:Ron ratio of 103 at a read voltage Vrd of 0.25 V with exceptionally low switching Vsw and set Vset voltages of 0.3 and 0.35 V, respectively, with ∼3 order variation between the maximum Rmax and Rmin resistances offered during single voltage sweep cycle. We have explained the memristive behavior using the dual ionic conduction mechanism in the SnS active layer. We extracted the real-time band diagram of SnS using ultraviolet photoelectron spectroscopy, explaining the low Vsw observed. We propose that the emulation of the I&F artificial neuron model exhibited by the fabricated device could serve as a promising application in the field of artificial neuron spiking.