1 February 2018 in Construction and Building Materials
19 October 2012 in Acta Mechanica
4 October 2011 in Acta Mechanica
1 December 2010 in Finite Elements in Analysis and Design
9 July 2012 in Journal of Pressure Vessel Technology
The high pressure branch pipe in hydropower station (BPHS) is usually composed by different materials in different parts and has complicated geometric configurations. The accurate and efficient methods for safety evaluation of the BPHS are still desirable. By introducing the element bearing ratio (EBR), generalized yield criterion as well as the reference volume concept, the elastic modulus reduction method (EMRM) is improved and applied to determine both the upper and lower bounds on limit loads of the BPHS. The global safety factor (GSF) is defined as the ratio of limit load to design load. The safety performance of the BPHS is assessed by comparing the GSF resulted from the EMRM with its allowable value specified in code. The efficiency and precision of the proposed method for safety evaluation of the BPHS are demonstrated through numerical examples in this paper. The results show that the proposed method is more suitable for safety evaluation and design optimization of the BPHS, compared with the elastic stress analysis method (ESAM) based on stress categorization which might underestimate the safety performance of the BPHS.
1 July 2024 in Physics of Fluids
This work investigates the vortex suppression performance and mechanism of ribs on high-quality ratio cylinders. Through wind tunnel tests and numerical simulations, the surface wind pressure distribution characteristics and flow separation phenomena of different ribbed cylinders are explored, and the spanwise correlation and nonlinear vibration characteristics of vortex-induced vibrations of ribbed cylinder models are analyzed. The main conclusions are as follows: ribs change the position of the boundary layer separation point, and the difference in size of left and right separated vortices causes a pressure jump phenomenon, altering the wind pressure distribution of the segment model and reducing the wind pressure, resulting in an increase in the locked wind speed of the ribbed cylinder. Complex separated vortices form behind the ribs, affecting the size of the wake vortex and reducing the stability of the segment model at locked wind speeds. Cylinders with four ribs exhibit good vortex-induced vibration suppression performance at 0° and 45° positioning angles. In addition, the cylinder with four installed ribs cylinders exhibits two locked wind speed regions, each showing different motion states: at the primary locked wind speed, they mainly demonstrate quasi-periodic vibrations and degraded quasi-periodic vibrations, while at the secondary locked wind speed, primarily in a chaotic state dominated by high-frequency harmonic components. These research findings have significant implications for future studies and practical engineering applications.