The diffusion of B implanted in Si has been investigated at different concentrations in a wide range of experimental conditions (temperature from 800 to 1000 °C and time from 10 s to 8 h) by using furnace and rapid thermal treatments. In particular, the transient enhanced diffusion induced by the implantation damage in the early phase of the annealing and the precipitation occurring in concomitance with the diffusion for dopant concentration exceeding the solid solubility have been extensively analyzed. A simulation program taking these phenomena into account has been developed by modifying the supreme iii code. A satisfactory agreement with experimental data has been obtained for all the investigated conditions. The model represents a significative improvement of the diffusion simulation of B implanted in crystalline Si. In fact, the more commonly used codes of process simulation do not evaluate adequately the effects of the above considered phenomena.
This work is devoted to the characterization of the Si:H system obtained by high-fluence, low-energy, hydrogen implantation into single-crystal silicon. The implanted hydrogen profile and the ones resulting after thermal annealing in the range 100–800 °C are detected by secondary-ion mass spectrometry and elastic-recoil detection analysis. The displacement field in the crystal, measured by channeling Rutherford-backscattering spectrometry, is found to depend on the direct radiation damage, the extended defects formed after ion implantation (revealed by transmission electron microscopy), and the implanted species. The contribution to the displacement field due to hydrogen-related defects has a characteristic ‘‘reverse annealing’’ in the range 100–400 °C, essentially due to their formation kinetics.
The diffusion of ion implanted F in Si has been studied by the use of secondary ion mass spectroscopy and thermal desorption spectroscopy. In the dose range studied (below amorphization threshold), F exhibits an anomalous out-diffusion behavior which is characterized by the depletion of F in Si substrate at temperatures ≥550 °C with complete suppression of diffusion deeper into the bulk of Si. F species which migrate to the surface react with native oxide and Si to form volatile Si oxyfluoride and Si fluoride, which then evaporate from the surface. There is clear evidence that the formation of Si oxyfluoride correlates strongly with the thermally activated anomalous migration of F. While the driving force for the anomalous F migration has not yet been identified, it appears that the electric field is not a dominant mechanism.