23 January 2021 in Journal of Geophysical Research: Earth Surface
Climate change impacts on sediment production and transfer processes on hillslopes and through channels are governed by possible changes in precipitation, runoff, and air temperature. These hydrological and geomorphological impacts are difficult to predict in temperature‐sensitive Alpine environments. In this study, we combined a stochastic weather generator model with the most current climate change projections to feed a hillslope‐channel sediment cascade model for a major debris‐flow system in the Swiss Alps (the Illgraben). This allowed us to quantify climate change impacts and their uncertainties on sediment yield and the number of debris flows at hourly temporal resolution. We show that projected changes in precipitation and air temperature lead to a reduction in both sediment yield (−48%) and debris‐flow occurrence (−23%). This change is caused by a decrease in sediment supply from hillslopes, which is driven by frost‐weathering. Additionally, we conduct model experiments that show the sensitivity of projected changes in sediment yield and debris‐flow hazard to basin elevation, with important implications for assessing natural hazards and risks in mountain environments. Future changes in hydrological and sediment fluxes are characterized by high uncertainty, mainly due to irreducible internal climate variability. Therefore, this stochastic uncertainty needs to be considered in climate change impact assessments for geomorphic systems.
10 September 2021 in Natural Hazards and Earth System Sciences
The prediction of debris flows is relevant because this type of natural hazard can pose a threat to humans and infrastructure. Debris-flow (and landslide) early warning systems often rely on rainfall intensity–duration (ID) thresholds. Multiple competing methods exist for the determination of such ID thresholds but have not been objectively and thoroughly compared at multiple scales, and a validation and uncertainty assessment is often missing in their formulation. As a consequence, updating, interpreting, generalizing and comparing rainfall thresholds is challenging. Using a 17-year record of rainfall and 67 debris flows in a Swiss Alpine catchment (Illgraben), we determined ID thresholds and associated uncertainties as a function of record duration. Furthermore, we compared two methods for rainfall definition based on linear regression and/or true-skill-statistic maximization. The main difference between these approaches and the well-known frequentist method is that non-triggering rainfall events were also considered for obtaining ID-threshold parameters. Depending on the method applied, the ID-threshold parameters and their uncertainties differed significantly. We found that 25 debris flows are sufficient to constrain uncertainties in ID-threshold parameters to ±30 % for our study site. We further demonstrated the change in predictive performance of the two methods if a regional landslide data set with a regional rainfall product was used instead of a local one with local rainfall measurements. Hence, an important finding is that the ideal method for ID-threshold determination depends on the available landslide and rainfall data sets. Furthermore, for the local data set we tested if the ID-threshold performance can be increased by considering other rainfall properties (e.g. antecedent rainfall, maximum intensity) in a multivariate statistical learning algorithm based on decision trees (random forest). The highest predictive power was reached when the peak 30 min rainfall intensity was added to the ID variables, while no improvement was achieved by considering antecedent rainfall for debris-flow predictions in Illgraben. Although the increase in predictive performance with the random forest model over the classical ID threshold was small, such a framework could be valuable for future studies if more predictors are available from measured or modelled data.
26 May 2022 in Geophysical Research Letters
Debris flows can grow greatly in size and hazardous potential by eroding bed and bank materials. However, erosion mechanisms are poorly understood because debris flows are complex hybrids between a fluid flow and a moving mass of colliding particles, bed erodibility varies between events, and field measurements are hard to obtain. Here, we identify the key controls on debris‐flow erosion based on a field data set that combines information on flow properties, bed conditions, and bed and bank erosion. We show that flow conditions and bed wetness jointly control debris‐flow erosion. Flow conditions describing the cumulative forces exerted at the bed during an event best explain erosion. Shear forces and particle‐impact forces are strongly correlated and act in conjunction in the erosion process. A shear‐stress approach accounting for bed erodibility may therefore be applicable for modeling and predicting debris‐flow erosion. This work provides a foundation for developing effective debris‐flow erosion models.
18 May 2024 in Earth Surface Processes and Landforms
14 November 2024 in Journal of Geophysical Research: Earth Surface
Estimating flow velocities is key to assessing hazards associated with debris flows. One approach to post‐event velocity estimation is the superelevation method, which uses debris‐flow mudlines to measure the cross‐channel surface inclination, or superelevation, produced by centripetal forces acting on the flow in a bend. Flow velocities are then calculated using a subjective parameterization of the forced vortex equation modified to include a debris‐flow specific correction factor. Subjective parameterization of this equation leads to substantial variability and uncertainty in the resulting flow velocities. We present an analysis of the reliability of the superelevation method using a large UAV‐based data set of 14 debris flows with front velocities of ∼0.8–6.5 m s−1 and cross‐channel surface inclinations of ∼0.6–8.5°, as well as a validation for a single debris flow measured using high‐resolution, high‐frequency 3D lidar data fused to video imagery. The validation event indicates that when the flow surface inclination can be measured directly, the forced vortex equation produces excellent results without needing a correction factor for Froude numbers ranging from 0.7 to 1.5. This finding indicates that the main challenge with the superelevation method lies in obtaining accurate measurements of superelevation from the mudlines, and that a correction factor may serve to compensate for measurement difficulties rather than variable flow properties. For very small and highly subcritical flows, the superelevation method may generate a large overestimation of flow velocities.
4 August 2024 in Geophysical Research Letters
Debris flows and floods generated by rainfall runoff occur in rocky mountainous landscapes and burned steeplands. Flow type is commonly identified post‐event through interpretation of depositional structures, but these may be poorly preserved or misinterpreted. Prior research indicates that discharge magnitude is commonly amplified in debris flows relative to floods due to volumetric bulking and increased frictional resistance. Here, we use this flow amplification to develop a metric ( Q* ) to separate debris flows from floods based on the ratio of observed peak discharge to the theoretical maximum water discharge from rainfall runoff. We compile 642 observations of floods and debris flows and demonstrate that Q* distinguishes flow type to ∼92% accuracy. Q* allows for accurate identification of debris flows through simple channel cross‐section surveys rather than through qualitative interpretation of deposits, and therefore should increase the performance of models and engineered structures that require accurate flow‐type observations.