This paper investigates the use of A. vera extract as a natural capping agent for TiO2 nanoparticles as well as a reducing agent for TiO2 nanoparticles. XRD, ultraviolet diffuse reflectance (UV-DRS), Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and energy-dispersive X-ray analysis (EDXA) were used to characterize the material. In their X-ray diffraction patterns, the titanium dioxide nanoparticles were found to have a high degree of crystallinity, indicating that they were synthesized. Infrared (FT-IR) spectra were used to determine the chemical composition of the plant extract. The DRS spectra in the UV-visible range reveal a high absorption peak at 356 nm, which indicates the existence of TiO2 nanoparticles in the sample. Shape of nanoparticles was revealed by SEM and TEM morphological investigations, which revealed their irregular and somewhat spherical nature. Only titanium and oxygen compounds were found in the EDX spectrum, indicating that they were present. This demonstrates that the NPs that were produced are devoid of contaminants. Using the produced nanoparticles as catalyst, we presented a photocatalytic degradation method for the dye methylene blue in this paper. The findings showed that 94 percent of the damage occurred within 120 minutes of being exposed to UV radiation.
10 February 2022 in Nanotechnology for Environmental Engineering
Nanofluids made of TiO2 and multiwalled carbon nanotubes are the focus of our study. Using TiO2 and water as the basic fluids, nanofluids were created in 100 : 0, 75 : 25, and 50 : 50 proportions. Carbon nanotubes (CNTs) were disseminated into these base fluids of three types at 0.125, 0.25, and 0.5 percentages. Over the course of two months, the change of zeta potential is monitored to assess the stability of the dispersion. XRD analysis and SEM and TEM analysis are carried out for TiO2 nanofluids. Nanoparticles were analyzed using EDAX analysis to identify their composition. SEM examination was used to investigate the morphology for TiO2 nanoparticles. Particles of TiO2 produced in this manner seemed to have an average diameter of 27 nm. Nanofluids have a poor stability, which is the most important aspect of employing them, although most studies did not focus on this. When it comes to nanofluids, this study is unique in that it provides an in-depth look of surface modification approaches that have been employed by researchers to address these issues, as well as an evaluation of their stability over two months. Solubility is improved by acid treatment of CNTs, which results in functional groups on the surface of CNTs.
Numerous Algae oils with low and medium viscosity were investigated as fuel for CI engines. However, high viscous algae oil has not been explored in detail as a replacement for diesel in CI engines due to operational problems and poor performance characteristics. Esterification of neat algae oil to obtain its biodiesel is a complex process. The biodiesel obtained also has viscosity nearly five times more than diesel viscosity. Hence, research efforts on CI engines using algae oil methyl ester are lacking, particularly in combustion characteristics. This work focuses on utilizing algae oil as a fuel in CI engines. Algae oil has more affinity for alcohols due to a higher percentage of ricinoleic acid which aids in forming a homogeneous mixture. Alcohols with better fuel properties improve the combustion capability of algae oils with low and medium viscosity. However, not much research has been carried out in alcohols with very high viscous algae oil. Hence, in this work, higher and lower‐order alcohols were blended with algae oil in their neat form and their biodiesel with Al2O3 nanoadditives for performance improvement.
A review of multiwalled carbon nanotubes as solar thermic fluids and their thermophysical properties is done in this article. The basic fluids were ethylene glycol and water in ratios of 100 : 0, 90 : 10, and 80 : 20. To investigate how surface modification impacts thermophysical properties, three base fluids were combined with surfactant-assisted MWCNTs and oxidized MWCNTs in weight fractions of 0.125, 0.25, and 0.5 percent, respectively. It takes two months to check whether the dispersion stays constant. Thermal conductivity and viscosity measurement were done using heated discs and Anton Paar viscometers. Using oxidized MWCNTs to disperse, the base fluids increased thermal conductivity by 15% to 24%. Surfactant-assisted MWCNTs in nanofluids perform worse than oxidized MWCNTs. The dynamic viscosity of nanofluids is higher than that of basic fluids between 50 and 70°C. During a mathematical computation, all of the MWCNT weight fractions and ethylene glycol volume percentages are included. The correlation may be a good fit for the experimental data within limits. The characteristics are forecasted using feed-forward backpropagation. In this research, buried layer neurons and factors are examined.
12 February 2022 in Nanotechnology for Environmental Engineering