Escuela Superior de Ingeniería y Arquitectura Unidad Zacatenco, Instituto Politécnico Nacional (ESIAZ-IPN), Unidad Profesional Adolfo López Mateo, Av. Miguel Bernard S/N, Col. Zacatenco, Del. Gustavo A. Madero, C.P. 07738, Ciudad de México, Mexico
Auto-generated profile, based on publicly available information
Antonio Arce-Plaza
Escuela Superior de Ingeniería y Arquitectura Unidad Zacatenco, Instituto Politécnico Nacional (ESIAZ-IPN), Unidad Profesional Adolfo López Mateo, Av. Miguel Bernard S/N, Col. Zacatenco, Del. Gustavo A. Madero, C.P. 07738, Ciudad de México, Mexico
The II-IV semiconductor compound, CdTe, has suitable electrical and optical properties as photovoltaic and high-energy radiation sensor material. As an absorber material for thin-film-based solar cells, CdTe holds the potentiality to fabricate high-efficiency solar cells by means of low-cost technologies. This chapter presents a comprehensive review on the CdTe thin-film deposition techniques as well as on the several configurations for the solar cell structures that have led the best efficiency conversion. Current CdTe thin-film deposition techniques include sputtering, close spaced vapor transport (CSVT), chemical spray pyrolysis, and electrodeposition. These techniques have easily been adapted to deposit polycrystalline CdTe films on various flexible and rigid substrates. In regard to the device structure configuration, a variety of partner materials (transparent contact, optical window, buffer layer) were tested, and CdTe film thickness was varied to develop opaque and semitransparent devices by some techniques mentioned above. In this chapter, we will discuss about each technique used for CdTe thin-film deposition as well as its advantages and disadvantages.
19 August 2020 in Journal of Nanoparticle Research
Cu2ZnSnS4 (CZTS) thin films processed by spray pyrolysis technique have attracted a great deal of attention from scientific community for solar cell applications. It is well known that Cu-poor and Zn-rich conditions are required for a good solar cell performance regardless of the method used for CZTS thin film deposition. However, few reports are found along the literature to explain such results. In this work, a comparison on the physical properties of CZTS thin films processed under stoichiometric (Cu2ZnSnS4) and optimal (Cu1.6Zn1.1Sn0.9S4) compositional ratios by spray pyrolysis method is presented. The impact of different substrate temperatures on structural, morphological, optical and electrical properties considering both compositional conditions is studied. For this purpose, characterization techniques such as XRD, Raman, XRF, EDX, AFM, transmittance and reflectance measurements, I-V, I-T and Hall measurements were performed. It is demonstrated that samples deposited under optimal compositional ratios present better structural and morphological properties as well as lower contribution of secondary phases along with band-gap energy values near to 1.5 eV as required for solar cell applications. From the electrical point of view, higher resistivity and grain boundary barrier height values along with a lower density of defects at grain boundary are reported for CZTS deposited under optimal compositional ratios. In this sense, this work helps to clarify why stoichiometric condition in CZTS samples produces lower solar cell performances.