19 January 2022 in Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences
We develop an optimization framework for the design of acoustic cloaks, with the aim of overcoming the limitations of usual transformation-based cloaks in terms of microstructure complexity and shape arbitrarity of the obstacle. This is achieved by recasting the acoustic cloaking design as a nonlinear optimal control problem constrained by a linear elliptic partial differential equation. In this setting, isotropic material properties’ distributions realizing the cloak take the form of control functions and a system of the first-order optimality conditions is derived accordingly. Such isotropic media can then be obtained in practice with simple hexagonal lattices of inclusions in water. For this reason, the optimization problem is directly formulated to consider suitable partitions of the control domain. Two types of inclusions are analysed, and long-wavelength homogenization is used to define the feasible set of material properties that is employed as a constraint in the optimization problem. In this manner, we link the stage of material properties optimization with that of microstructure design, aiming at finding the optimal implementable solution. The resulting cloak is numerically tested via coupled structural/acoustic simulations. As a further test benchmark, a concave target and the silhouette of a ship are considered other than the usual axisymmetric cloak.
1 September 2024 in The Journal of the Acoustical Society of America
Manipulating underwater pressure waves is crucial for marine exploration, as electromagnetic signals are strongly absorbed in water. However, the multi-path phenomenon complicates the accurate capture of acoustic waves by receivers. Although graded index lenses, based on metamaterials with smoothly varying properties, successfully focus pressure waves, they tend to have high directivity, which hinders practical application. This work introduces three 2D acoustic lenses made from a metamaterial composed of solid inclusions in water. We propose an optimization scheme where the pressure dynamics is governed by Helmholtz's equation, with control parameters affecting each lens cell's density and bulk modulus. Through an appropriate cost function, the optimization encourages a broadband, low-directivity lens. The large-scale optimization is solved using the Lagrangian approach, which provides an analytical expression for the cost gradient. This scheme avoids the need for a separate discretization step, allowing the design to transition directly from the desired smooth refractive index to a practical lattice structure. As a result, the optimized lens closely aligns with real-world behavior. The homogenized numerical model is validated against finite elements, which considers acoustic-elastic coupling at the microstructure level. When homogenization holds, this approach proves to be an effective design tool for achieving broadband, low-directivity acoustic lenses.
15 May 2024 in Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences
Open cavities are often an essential component in the design of ultra-thin subwavelength metasurfaces and a typical requirement is that cavities have precise, often low frequency, resonances while simultaneously being physically compact. To aid this design challenge, we develop a methodology to allow isospectral twinning of reference cavities with either smaller or larger ones, enforcing their spectra to coincide so that open resonators are identical in terms of their complex eigenfrequencies. For open systems, the spectrum is not purely discrete and real, and we pay special attention to the accurate twinning of leaky modes associated with complex-valued eigenfrequencies with an imaginary part orders of magnitude lower than the real part. We further consider twinning of two-dimensional gratings, and model these with Floquet–Bloch conditions along one direction and perfectly matched layers in the other one; complex eigenfrequencies of special interest are located in the vicinity of the positive real line and further depend upon the Bloch wavenumber. The isospectral behaviour is illustrated, and quantified, throughout by numerical simulation using finite-element analysis.
18 July 2023 in Ocean Engineering
1 September 2025 in The Journal of the Acoustical Society of America
Acoustic lenses are typically based on refractive index profiles derived from the geometric approximation of high-frequency waves, yet the critical issue of impedance mismatch is often neglected. Mismatched devices suffer from unwanted reflections and dispersion, which can significantly degrade performance in practical applications. In this work, we propose impedance profiles for lenses to achieve efficient wave transmission while maintaining the desired refractive index and minimizing dispersion effects. A family of impedance profiles is derived from the acoustic wave equation such that the phase velocity is preserved. First, the 1D setting is considered to explain how dispersion occurs inside a lens and at its interfaces. Then, the method is applied to 2D axisymmetric configurations where the impedance mismatch is radially redistributed. These profiles are demonstrated in the acoustic setting of a Lüneburg lens but can be easily extended to more general scenarios, such as imaging or cloaking in air and water, where matching the impedance of the background poses significant challenges.
1 November 2025 in The Journal of the Acoustical Society of America
Limiting the total weight of an acoustic cloak is of fundamental importance in underwater applications, where buoyancy of the cloaked object is desirable. Unfortunately, it is well known that traditional cloaking strategies imply either a mass tending to infinity or a total weight equal to the Archimedes's force, thus making a perfect cloak that preserves the buoyancy of the target impossible. In this paper, we discuss strategies to reduce the weight of the cloak seeking a good compromise between weight reduction and acoustic performance. In particular, we compare and combine two existing strategies: the so-called eikonal cloak, where an impedance mismatched cloak is adopted, and the near-cloak, where a non-singular transformation makes the target equivalent to a smaller obstacle. We show that properly combining these strategies allows to reduce the mass of the cloak while maintaining a scattering reduction in line with the existing literature. We also investigate radially varying mismatch as a way to further improve the balance between scattering reduction and buoyancy.