A coupled magnetostructural transition (MST) from a high-temperature low-magnetic -type hexagonal phase to a low-temperature high-magnetic -type orthorhombic phase, and the associated large magnetocaloric effect, are explored for the system. Room-temperature structural analysis is carried out to investigate the orthorhombic distortion of the hexagonal phase initiated by introducing at the site. The indirect isothermal magnetic measurement technique is employed to estimate the magnetocaloric effect across the coupled phase transition. Fascinatingly, a relatively large value of isothermal magnetic entropy change (Δ$S_{M}$) of (−12.02 ± 0.34) J ${\rm{kg}}^{-1}\;{\rm{K}}^{-1}$ at (332.5 ± 0.2) K and relative cooling power (RCP) of (119.6 ± 3.5) J ${\rm{kg}}^{-1}$ is achieved for the composition , for a field change of 30 kOe. The complex hysteresis behavior around the phase transition determines the efficiency of the material, which is revealed by both temperature- and field-sweep-rate dependence magnetization studies. Superheating (or supercooling) of the parent phase observed at higher temperature and field-sweep rates leads to broad thermal- and field-induced hysteresis. Lower sweep rates of temperature and magnetic field remove the quenching phenomenon across the MST and enhance the working efficiency. A large magnetocaloric effect and negligible variation of hysteresis with the temperature- and magnetic-field-sweep rates compared with other alloys makes this nominal low-cost material a promising candidate for practical solid-state cooling applications.
The advancement of magnetic materials with coupled magneto-structural phase transition (MST) to fulfill the ultimate objectives of practical solid-state cooling applications requires a better understanding of the hysteresis phenomenon linked across the phase transition region along with the large magnetocaloric parameters. For the present sample Mn0.65Ni0.65Fe0.70Si, the MST is associated with a sharp jump in magnetization along with a small thermal hysteresis of ∼13 K. A giant isothermal magnetic entropy change (|ΔSMmax|) of ∼37.6 J kg−1 K−1 at 299 K and effective refrigerant capacity (RCeffe) of ∼214.3 J kg−1 under ΔH = 30 kOe is obtained with excellent compatibility between the martensite and austenite phases. The geometrical compatibility condition, i.e., very small (∼0.55%) deviation of the middle eigenvalue (λ2) from unity justifies the observation of small hysteresis in the present material. The investigation of hysteresis behavior under different extents of the driving forces (temperature or magnetic field) reveals that both the driving forces trigger equally the phase transition and are responsible equivalently for the hysteresis phenomenon. The present study provides a pathway to understand the complexity of the hysteresis behavior, its impact on the reversibility of magnetocaloric effect, and its minimization by optimizing the geometrical compatibility condition between the austenite and martensite phases.