2 September 2021 in Superconductor Science and Technology
Over the last 20 years, technologies for manufacturing rare-earth barium copper oxide (REBCO)-coated conductors have undergone a steady development. Currently, the properties of these conductors are reasonably stable owing to the intensive efforts of the manufacturers. However, for high-field magnet applications, such as the magnets used in nuclear magnetic resonance instruments, accelerators, and fusion reactors, further enhancements in the current-carrying capabilities and/or the current densities of the conductors under a high magnetic field are necessary. Recently, several conductors doped with artificial pinning centers (APCs) have become commercially available, primarily from four manufacturers: Fujikura, Shanghai ST, SuperOx, and SuperPower. In this study, we characterized these relatively new conductors from the viewpoint of a magnet designer. We measured the critical currents (I c) of full-size 4 mm wide conductors in a wide field range at 4.2 K and 77 K; we also measured the critical temperatures. The measurement results showed that the I c values at 4.2 K under perpendicular fields for these conductors are significantly greater than those of non-APC conductors; for the 4 mm wide conductors, the I c values are in the range of 300–740 A and 450–1000 A at 18 T and 12 T, respectively. Furthermore, we clarified that the non-Cu current density (J c) at 4.2 K for some of the investigated conductors is more than twice the J c of the recent Nb3Sn conductors in fields exceeding 15 T. In the investigated commercial REBCO-APC conductors, the highest layer J c of ∼60 kA mm−2 (at 18 T and 4.2 K) was noted. We also investigated the I c–B relationship at 4.2 K for the recent REBCO-APC conductors.
9 August 2021 in Physical Review B
Suppression of the occurrence of remanent vortices is necessary to improve the quality factor of superconducting resonators. In particular, the flux-expulsion dynamics in Nb during cooling has become of major interest to researchers focusing on superconducting cavities. To study the vortex states and their behavior in high-purity cavity-grade Nb, we used a magneto-optical imaging technique to perform real-space observations of the magnetic field distributions during the field-cooling and field-scanning processes. In the field-cooling process, the distributions were observed to undergo phase separation into vortex and Meissner regions, as would be expected in an intermediate mixed state (IMS). The vortex regions in the IMS, such as vortex bundles, tend to be larger in higher fields, in contrast to the Meissner regions, which experience shrinkage. In the field-scanning process, domelike field profiles, which indicate a geometrical barrier with very weak bulk pinning, were observed. The existence of the IMS suggests that cavity-grade Nb is in a type-II/1 superconductor regime, in which attractive interaction between vortices at a length scale of the penetration depth is crucial for the behavior of vortices.
1 October 2003 in Physica C: Superconductivity and its Applications
19 March 2025 in Physical Review B
4 February 2021 in IEEE Transactions on Applied Superconductivity
Jelly-roll (JR) processed wires using metal thin foils as starting materials have excellent cold workability and drawability. We have successfully fabricated Nb/Al composite mono-core wires having 50 μm in outer diameter and over 400 meters in length. Furthermore, some of the wires were additionally drawn to 30 μm in outer diameter. It is known that the critical current density (Jc) of Nb3Al synthesized by low-temperature diffusion reactions increases with decreasing the diffusion distance between Nb and Al. In this study, we have confirmed that Jc would increase with decreasing the wire diameter, and the maximum Jc has been obtained on Nb3Al wires with 30 μm in diameter. In addition, a 7-wire round cable has also been demonstrated using 80 μm diameter wire, with an Ic 7 times the Ic of a single wire. A transport current test was performed for the cable sample simulating W&R and R&W processes using a 50 mm diameter G10 holder. There were no differences between the Ic and the n-values in the W&R and R&W processes. Moreover, as a feasibility study, a 3rd bundle Rutherford cable has been successfully fabricated using 3,108 pure copper wires 50 μm in diameter.
1 January 2012 in Teion Kogaku (Journal of Cryogenics and Superconductivity Society of Japan)