Nedeljko Karaulac

Nedeljko Karaulac

Auto-generated profile, based on publicly available information

Nedeljko Karaulac

Department of Electrical Engineering and Computer Science, Massachusetts Institute of Technology 2 , 77 Massachusetts Ave., Cambridge, Massachusetts 02139

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 February 2021 in Journal of Vacuum Science & Technology B
Verified
Journal Article
Closed access
PDF file
RBRanajoy Bhattacharya
Ranajoy Bhattacharya
NKNedeljko Karaulac
Nedeljko Karaulac
WCWinston Chern
Winston Chern
AAAkintunde Ibitayo Akinwande
Akintunde Ibitayo Akinwande
JBJim Browning
Jim Browning
Silicon field emitter arrays (Si FEAs) are being explored as an electron source for vacuum channel transistors for high temperature electronics. Arrays of 1000 × 1000 silicon tip based gated field emitters were studied by measuring their electrical characteristics up to 40 V of DC gate bias with a 1.3 mA emission current at different temperatures from 25 to 400 °C. At ∼350 °C, residual gas analyzer measurements show that water desorption and carbon dioxide partial pressures increase significantly, the gate to emitter leakage current decreases by more than ten times, and the collector current increases by more than ten times. These improvements remained after heat-treatment but were then lost once the device was exposed to the atmosphere for several days. The improvements could be recovered upon additional baking suggesting that adsorbates (primarily water) on the surface affected field emission and surface leakage. It was also found that after heat-treatment, the electrical characteristics of the devices exhibited <3% variation in collector current at 40 V, which (without exposure to the atmosphere) can be termed as a weak temperature dependence. These results suggest that Si FEAs could be viable as a high temperature transistor.

27 January 2020 in Journal of Vacuum Science & Technology B
Verified
Journal Article
Closed access
PDF file
NKNedeljko Karaulac
Nedeljko Karaulac
GRGirish Rughoobur
Girish Rughoobur
AAAkintunde I. Akinwande
Akintunde I. Akinwande
The authors report silicon field emitter arrays (FEAs) that were fabricated using a trilevel resist process and are highly uniform. The authors explored the current sensitivity of FEAs to tip radius variation using different tip radius distributions and show that reducing the tip radius dispersion is an effective alternative to increasing the resistance of a current limiter for achieving uniform emission current. In order to reduce the tip radius dispersion, the authors use a trilevel resist process to increase the uniformity of the array of dots used as the etching mask for forming the silicon tips. SEM images show that they were able to reduce the standard deviation of the dot diameter by 60% using a trilevel resist process instead of a single layer resist process. Device characterization showed that the FEAs have a very narrow range of slopes, bFN, extracted from the Fowler–Nordheim plot, indicating that the field emitters within the FEA are highly uniform.

1 May 2021 in Journal of Vacuum Science & Technology B
Verified
Journal Article
Closed access
PDF file
RBRanajoy Bhattacharya
Ranajoy Bhattacharya
NKNedeljko Karaulac
Nedeljko Karaulac
GRGirish Rughoobur
Girish Rughoobur
WCWinston Chern
Winston Chern
AAAkintunade Ibitayo Akinwande
Akintunade Ibitayo Akinwande
JBJim Browning
Jim Browning
The performance of silicon gated field emission arrays (GFEAs) was characterized before and after ultraviolet (UV) light exposure. Emission and gate leakage currents were measured on 1000 × 1000 tip arrays by sweeping the gate voltage to 40 V DC with a fixed DC collector voltage of 100 V DC. UV light exposure was used to desorb water molecules from the GFEA surfaces. It was found that, before UV exposure, the gate current was 6 mA at 40 V, whereas after 70 min of UV exposure, the gate current decreased to 0.46 mA, indicating a more than ten times reduction in leakage current between the gate and the emitter. Similarly, the observed collector current was 94 μA at 40 V before exposure, and after UV exposure, the collector current increased to 1.33 mA, indicating an improvement of more than 14 times. During the experiments with UV light, residual gas analyzer measurements showed that the partial pressure for water increased by greater than ten times after 60 min of exposure and then decreased by 1 order of magnitude after 100 min of exposure. The emission and leakage current changes remained even after turning off the UV lamps for several tens of minutes; however, upon the exposure to the atmosphere for a few days, those changes reversed. The enhancement could again be observed after additional UV exposure indicating that the adsorbates (mainly water along with others) on the surface affected the leakage between gate and emitter and field emission. Based on analysis of the IV characteristics before and after UV exposure, the work function of the emitter surfaces increases while the portion of the array tips that emits expands resulting in a decrease in the calculated array tip sharpness as duller tips now emit.

27 January 2023 in Journal of Vacuum Science & Technology B
Verified
Journal Article
Open access
PDF file
RBRanajoy Bhattacharya
Ranajoy Bhattacharya
RHRobert Hay
Robert Hay
MCMason Cannon
Mason Cannon
NKNedeljko Karaulac
Nedeljko Karaulac
GRGirish Rughoobur
Girish Rughoobur
JBJim Browning
Jim Browning
Silicon gated field emitter arrays have been used as a vacuum transistor to demonstrate a 152 kHz Colpitts oscillator. The transfer and output characteristics of the 1000 × 1000 silicon arrays were measured using a collector placed ≈ 1 mm away with a gate voltage up to 40 V and a collector voltage up to 200 V. The data were used to establish an LTspice transistor model based on a field emission tip model and a collector current model that fit the characteristics. Then, the LTspice model was used to design a low frequency Colpitts oscillator. Furthermore, experiments were carried out to successfully demonstrate the oscillation. Oscillation frequency was 152 kHz with a peak to peak voltage of 25 V for a tip to ground series resistance value of 10 kΩ at 50 V on the gate and 210 V on the collector. Further, the oscillator was also tested at 50, 100, 200, 300, and 400 °C. It was observed that frequency shifts for each temperature which is due to the change in the overall capacitance of the test setup. This type of device could be used as a temperature sensor in harsh environments.

20 December 2021 in Journal of Vacuum Science & Technology B
Verified
Journal Article
Closed access
PDF file
RBRanajoy Bhattacharya
Ranajoy Bhattacharya
MCMason Cannon
Mason Cannon
RBRushmita Bhattacharjee
Rushmita Bhattacharjee
GRGirish Rughoobur
Girish Rughoobur
NKNedeljko Karaulac
Nedeljko Karaulac
JBJim Browning
Jim Browning
Field emission cathodes are promising candidates in nanoscale vacuum channel transistors and are used in microwave vacuum electron devices. Prior research has shown that UV light exposure as well as 350 °C vacuum bake can desorb water vapor from Si field emission tips, resulting in lower work function and improved emission performance. However, after long exposure to room air (greater than 24 h), the improved performance is lost as water adsorbs on the tips. In this study, experiments were carried on two sets of 1000 × 1000 Si-gated field emitter arrays to determine the length of time that emitters can be exposed to room air without degradation. First, the samples were exposed to UV light irradiation in vacuum, and the I–V curves were measured. Then, the samples were exposed to room air with a relative humidity ranging from 30% to 40% for varying times (5, 6, 8, 12, 24, and 48 h) and then tested again under high vacuum. It was found that the emission current did not degrade after room air exposure of 5 h. However, at 6 h of exposure, degradation started to occur, and after 24 h, the emission current went back to the original, pre-UV exposure case. In a separate experiment, UV irradiated samples were stored in nitrogen for 72 h, with a 10% degradation in current. These results demonstrate that field emission devices with improved performance resulting from water desorption can be handled in air up to 5 h, depending upon humidity and stored in nitrogen for 72 h while maintaining improved performance.

24 July 2023 in Journal of Vacuum Science & Technology B
Verified
Journal Article
Open access
PDF file
RBRanajoy Bhattacharya
Ranajoy Bhattacharya
MCMason Cannon
Mason Cannon
GRGirish Rughoobur
Girish Rughoobur
NKNedeljko Karaulac
Nedeljko Karaulac
WCWinston Chern
Winston Chern
JBJim Browning
Jim Browning
Effects of gases on field emission performance were measured using silicon-gated field emitter arrays. Gas was injected into a vacuum chamber with a 1000 × 1000 tip array, which was driven by a DC gate and collector voltages. The collector voltage was fixed at 200 V while the gate voltage was swept to 40 V. For the gas exposure study, N2, He, and Ar were used. The sets of partial pressures, 5 × 10−6, 5 × 10−5, and 5 × 10−4 Torr, were used for the experiment. It was observed that N2 had the least effect and Ar had the worst effect on emission current performance. The degradation of collector current at 5 × 10−4 Torr pressure for Ar was ≈65% where for the N2, at the same level of pressure, the degradation was ≈41%. However, further experiments with high purity Ar gas showed that it was the water vapor present in the gas itself that was the primary cause of reduction in emission current and not the gas itself. The results expressed in reduction in emission current versus Langmuir exposure versus the current clearly showed the effect of water vapor. After the vacuum was recovered, the work function again restored partially to its original value. After ultraviolet light cleaning, the emission current was restored completely to the original state.