In this study, the potential of copper tailing deposits in Chile for the sequestration of carbon dioxide (CO2) via ex-situ mineral carbonation integrating the recovery of valuable metals was assessed. An inventory of tailing deposits and CO2 sources existing in Chile was constructed to determine the most suitable site for the installation of a future mineral carbonation plant and to evaluate the technical, economic, and environmental feasibility of CO2 capture, separation, and transport from the source to the mineral carbonation plant. The data of the inventory of tailings deposits in Chile were obtained from the National Service of Geology and Mining. For the thermoelectric plants installed in Chile, data of energy production were obtained from the Energy National Commission. Through the use of the technique for order preference by similarity to ideal solution (TOPSIS) method and sensitivity analysis, the optimum location in the region of Antofagasta to install a mineral carbonation plant was identified. In addition, the results show that in the region of Antofagasta five tailing deposits have the potential to sequester between 66 to 99 Mt of CO2. Meanwhile, thermoelectric plants in 2018 produced about 9.4 Mt of CO2 that is available to be sequestered, with a maximum generation potential of 21.9 Mt of CO2eq per year. The methodology and the study presented can be considered as a preliminary study to identify tailings that require further analysis.
2 April 2019 in Industrial & Engineering Chemistry Research
Artificial neural networks (ANNs) are applied to correlate and predict physico-chemical, transport and thermodynamic properties of seawater. Values of these properties are needed in the design, simulation and optimization of processes in which seawater is used, mainly in the mining industry. Density, vapor pressure, boiling temperature elevation, specific heat, viscosity, thermal conductivity, surface tension, osmotic coefficient, enthalpy, entropy and latent heat of vaporization are analyzed. These properties depend on temperature and salt content in the saline solution, so these are the independent variables considered for the training and testing of the ANN. Several network architectures were considered and correlated, and predicted values of these properties were compared with values obtained from the literature. As a measure of the accuracy of the method, the average deviation and the average absolute deviation are evaluated. The ANN model obtained gave lower deviations than other more sophisticated models presented in the literature. The chosen ANN model gave absolute deviations lower than 0.5%, with a few exceptions, but maximum deviations were always below 1.0% for all properties.
1 November 2021 in Industrial & Engineering Chemistry Research