30 April 2025 in Eastern-European Journal of Enterprise Technologies
The object of this study is the deformation processes in a protective structure of the preparatory working, maintained in the excavated space of the excavation area. The task addressed was ensuring the stability of the preparatory working in a deep coal mine to improve the safety of miners and coal mining. The assessment of the strength of the cast strip for the protection of preparatory workings in excavation areas has been substantiated. It was experimentally established that in the zone of active influence of mining pressure on the section 0<l<50 m behind the treatment face, there is an exponential dependence between the length of the working l (m) and the relative change in the volume dV of the protective structure. It characterizes the safe deformation resource of the cast strip. Within its limits, the process of gaining strength of the protective structure occurs. At dV<0.18 and the failure rate of the arched flexible support ω0.22, and 0.22<ω80 m behind the breakage face, the level of threat of roof collapses approaches a critical state, which is associated with an uncontrolled increase in lateral rock displacements due to the loss of strength of the cast strip. The cast strip performs the functions of a supporting structure only in a certain range of physical, mechanical, and deformation properties. The operational condition of the preparatory working is ensured within the deformation resource of the cast strip. After reaching the rated strength of the cast strip, its strength makes it possible to limit the movement of lateral rocks on the contour of the working and ensure its stability at a distance of l£80 m along the length of the excavation section
30 December 2025 in JOURNAL of Donetsk mining institute
Purpose. To assess the stiffness of backfill masses made of crushed rock with polyfraction-al composition under conditions of complete gob backfilling, to prevent roof collapses in the extraction sections of coal mines. Methods. To simulate complete gob backfilling with crushed rock, compressive compac-tion was applied to scaled model materials with polyfractional grain-size compositions of (0.1–5) mm, (1–5) mm, and (2–5) mm. The deformation process in the backfill masses was examined through laboratory testing of experimental models in a compression device on a hydraulic press. Results. Under compressive compaction of crushed rock with polyfractional composition, displacement restriction during gradual loading occurs when the relative deformation of the backfill mass reaches λ = 0.37–0.38, and the compaction coefficient of the material is kc = 1.59–1.62. The artificially created mass attains maximum stiffness at the highest values of the relative change in rock volume per unit of convergence, ΔVₖ (m⁻¹). The growth rate of ΔVₖ characterizes the process of rearrangement and compaction of the crushed rock and depends on its grain-size distribution. The parameter ΔVₖ serves as an informative indicator of the deformation behavior of the backfill material, since it increases hyperbolically as it approaches the limit values of stiffness. Novelty. A hyperbolic relationship has been established between the relative change in rock volume per unit of convergence ΔVₖ and the stiffness of a backfill mass composed of polyfractional crushed rock under compressive compaction. Practical significance. The stiffness of the backfill mass determines the intensity of roof displacements in the gob areas of longwall panels. Maximum stiffness of the artificially created mass is achieved by a material that possesses a reserve of compaction associated with the rear-rangement of crushed-rock grains.
30 April 2026 in Eastern-European Journal of Enterprise Technologies
This study investigates deformation processes occurring in secondary support systems for gob-side retained entries in coal mine extraction panels mining thin seams. The task addressed is to stabilize gob-side retained entries by improving the bearing capacity of secondary support systems to prevent roof collapses and provide safe working conditions. The comparative assessment was conducted based on an analysis of strain energy-related indicators. Underlying the study are physical models simulating filling walls, concrete blocks, and combined structures consisting of blocks with wooden interlayers. During uniaxial compression tests, the deformation capacity of each type of support system was determined; critical values of relative deformation at which the structures lose their functional performance were identified. The application of an energy-based approach has made it possible to quantify the stability limit and to predict the onset of structural failure. Experimental results showed that, under uniaxial compression, rigid secondary support systems operate under an increasing resistance mode before the initiation of failure processes. At the same time, the range of linear elastic deformation of the combined support structure is 33% greater than that of the homogeneous structure (damage initiation occurs at λb = 0.103 and λb = 0.075–0.08, respectively), which results in a delayed transition to loss of bearing capacity. The incorporation of limited yielding elements into rigid structures facilitates stress redistribution and enhances their deformation capacity. An energy-based approach to analyzing the interaction between secondary support systems and the surrounding rock mass has been proposed, based on the use of strain energy density and its components, which characterize the processes of energy accumulation and dissipation. The practical significance of this study is associated with the application of the results to substantiate the design parameters for rigid secondary support systems for gob-side retained entries in coal extraction panels mining thin seams up to 1.2 m thick
31 December 2025 in Labour protection problems in Ukraine
Purpose. To evaluate the bearing capacity of secondary support structures for mine roadways maintained within the goaf area, aimed at ensuring their stability and improving occupational safety in longwall mining operations by preventing roof and sidewall collapses. Methodology. The bearing capacity of the secondary support structures was examined using scaled physical models subjected to loading in a hydraulic press. The modelling was qualitative, focused on investigating the deformation mechanism, shape transformation, and sequence of failure of the secondary support structures. Conclusions. For coal pillars, within their deformation range (relative strain λ ≤ 0.1), sufficient bearing capacity is maintained, enabling short-term restriction of side-rock movement under progressive loading. As the relative deformation increases (λ > 0.1), the structures lose their bearing capacity, and the risk of roof collapse approaches a critical level. For timber packs made of wooden sleepers, compaction of structural elements occurs within their deformation range, increasing stiffness. Under these conditions, the bearing capacity of the support structures limits the movement of stratified rock layers. Both coal pillars and timber packs have a limited strength reserve. The deformation capacity of structures made from crushed rock is governed by the achievement of maximum compaction of the initial material, which reduces the relative deformation and enhances stiffness. Practical implications. The stability of mine roadways maintained within the goaf area and the prevention of roof collapse in longwall panels can be achieved by employing secondary support structures with a deformation capacity sufficient to provide the bearing resistance required to limit side-rock movement within the goaf area. Originality. The secondary support structures are considered as load-bearing systems with variable stiffness. The nature of stiffness variation enables the assessment of their deformation capacity and the identification of optimal operating conditions.
27 November 2025 in Naukovyi visnyk Donetskoho natsionalnoho tekhnichnoho universytetu
Purpose. To assess the deformation properties of base materials made of crushed rock of heterogeneous granulometric composition under different compression conditions to substantiate measures to prevent roof collapses in the mining areas of coal mines. Methods. Deformation processes were studied on experimental models that simulated the conditions of complete and partial filling of the mined space with crushed rock. Partial filling corresponded to the conditions of uniaxial compression of the crushed rock with the possibility of its lateral expansion. Full filling - to the conditions of compression compression of the base material. Results. Compaction of the embankment massifs under gradual loading under compression conditions leads to an increase in the deformation modulus Ed (MN/m) more than three times, compared to the conditions of uniaxial compression. The embankment massif, when fully compacted, works as a supporting structure with increasing resistance, which acquires the characteristics of a rigid support when reaching the limit compaction (in this experiment, when reaching the value of the relative deformation λ = 0.381, which is 42% less than under uniaxial compression conditions). The stiffness of the model material in the languages of compression compression is on average 40% greater than under uniaxial compression conditions. Under such conditions, the strength of the massif becomes maximum, the increase in displacements reaches minimum values, and the movements of lateral rocks are limited. Scientific novelty. The dependence between the relative change in the volume of crushed rock of heterogeneous granulometric composition per unit of convergence ΔVK (m⁻¹) and the deformation modulus of the backfill massif, which is under compression compression conditions, has been established. The nature of this dependence allows, based on the results of laboratory tests, to estimate the limiting value of the deformation modulus of the backfill massif when reaching the limit compaction. Practical significance. The estimation of the limiting value of the deformation modulus of the backfill material is necessary to determine the strength of the backfill massifs, which determines the efficiency of holding the forged rock massif and affects the stability of the preparatory workings of the extraction areas and increasing the safety of miners. Keywords: backfilling of the mined space, crushed rock, compaction, uniaxial compression, compression compression, deformation processes