10 August 2020 in Nature Energy
27 March 2019 in ACS Applied Materials & Interfaces
1 February 2021 in Journal of the Electrochemical Society
Optimizing the performance of the lithium metal anode is required to enable the next generation of high energy density batteries. Anode-free lithium metal cells are particularly attractive as they facilitate the highest energy density cell architecture. In this work, we investigate the performance of anode-free cells cycled under different protocols. We demonstrate the impact of charge and discharge current density with three different cycling conditions: a symmetric charge-discharge, an asymmetric faster charge and an asymmetric slower charge. We show that the relative rate of charge vs discharge is more important than the absolute current densities, and that cycling with an asymmetric slower charge protocol is optimal in agreement with previous studies on cells with lithium metal anodes. We also examine the effect of depth of discharge and demonstrate how the lower voltage cut-off can be chosen to form a lithium reservoir in situ. We show that the capacity of the lithium reservoir significantly benefits lifetime for cells cycled with a limited depth of discharge. Finally, we develop a specialized intermittent high depth of discharge cycling protocol optimized for anode-free lithium metal cells.
24 August 2018 in Journal of the Electrochemical Society
A set of LiNi0.5Mn0.3Co0.2O2/graphite lithium-ion cells underwent 750 charge-discharge cycles during about 8 months at 55°C to upper cutoff potentials of 4.0, 4.1, 4.2, 4.3, and 4.4 V. The electrolyte in these cells was extracted using a centrifuge method and studied using gas chromatography/mass spectrometry to determine the changes to the solvents and by inductively coupled plasma-mass spectrometry to determine the changes to the salt content in the electrolyte. The negative electrodes from the cells were harvested and studied by micro-X-ray fluorescence to quantify the amount of transition metals which migrated from the positive electrode to the negative electrode during the testing. Emphasis is given to a detailed description of the quantitative methods used in the hope that others will adopt them in similar studies of different types of aged lithium-ion cells. The cells studied here initially had 1.1 molal LiPF6 ethylene carbonate (EC): ethyl methyl carbonate (EMC) (3:7 by weight) electrolyte. The aged cells showed increasing amounts of dimethyl carbonate and diethyl carbonate created by transesterification as the upper cutoff potential increased. Only extremely small amounts of Mn, less than 0.1% of the total Mn in the positive electrode, were found on the negative electrode after this aggressive testing.
18 July 2018 in Journal of the Electrochemical Society
Fast-charging lithium-ion cells require electrolyte solutions that balance high ionic conductivity and chemical stability. The introduction of an organic ester co-solvent is one route that can improve the rate capability of a cell. Several new co-solvent candidates were identified based on viscosity, permittivity (dielectric constant), and DFT-calculated electrochemical stability windows. Several formate, nitrile, ketone, and amide co-solvents are shown to increase the ionic conductivity of lithium hexafluorophosphate in conventional organic-carbonate-based solutions. Based on gas production during the first formation cycle in Li[Ni1-x-yCoxAly]O2/graphite-SiO pouch cells, five candidates were identified: methyl formate (MF), ethyl formate (EF), propionitrile (PN), isobutyronitrile (iBN), and dimethyl formamide (DMF). High temperature storage (60°C), long-term cycling, and ultrahigh-precision coulometry results indicate that MF offers the greatest balance between conductivity increase and cell lifetime. Future work is encouraged to develop more stable solution chemistries that incorporate MF. PN may prove useful for low temperature (< 40°C) applications.
1 May 2022 in Journal of the Electrochemical Society
Single crystal Li[Ni0.5Mn0.3Co0.2]O2//graphite (NMC532) pouch cells with only sufficient graphite for operation to 3.80 V (rather than ≥4.2 V) were cycled with charging to either 3.65 V or 3.80 V to facilitate comparison with LiFePO4//graphite (LFP) pouch cells on the grounds of similar maximum charging potential and similar negative electrode utilization. The NMC532 cells, when constructed with only sufficient graphite to be charged to 3.80 V, have an energy density that exceeds that of the LFP cells and a cycle-life that greatly exceeds that of the LFP cells at 40 °C, 55 °C and 70 °C. Excellent lifetime at high temperature is demonstrated with electrolytes that contain lithium bis(fluorosulfonyl)imide (LiFSI) salt, well beyond those provided by conventional LiPF6 electrolytes. Ultra-high precision coulometry and electrochemical impedance spectroscopy are used to complement cycling results and investigate the reasons for the improved performance of the NMC cells. NMC cells, particularly those balanced and charged to 3.8 V, show better coulombic efficiency, less capacity fade and higher energy density compared to LFP cells and are projected to yield lifetimes approaching a century at 25 °C.