WS2 inorganic nanotubes (WS2-NT) have been incorporated into Polylactic Acid (PLA) by melt mixing to create a bio-degradable, mechanically reinforced nanocomposite filament. The filament was then processed by Fused Filament Fabrication (FFF) 3D-printer, and the morphology and characteristics before and after printing were compared. We found that addition of WS2-NT to PLA by extrusion mixing increases the elastic modulus, yield strength and strain-at-failure by 20%, 23% and 35%, respectively. Moreover, we found that the printing process itself improves the dispersion of WS2-NT within the PLA filament, and does not require changing of the printing parameters compared to pure PLA. The results demonstrate the advantage of WS2-NT as reinforcement specifically in 3D-printable polymers, over more traditional nano-reinforcements such as graphene and carbon nanotubes. WS2-NT based 3D-printable nanocomposites can be used for variety of applications from custom-made biodegradable scaffold of soft implants such as cartilage-based organs and biodegradable soft stents to the more general easy-to-apply nano-reinforced polymers.
28 December 2023 in Advanced Energy and Sustainability Research
Photocatalytic processes are among the prime means for mitigating the pollution caused by toxic effluents. In this context, photocatalysis presents a promising path and is undergoing rapid evolution. Halide perovskite‐nanocrystals (HP‐NCs) are excellent candidates due to their negative conduction band minimum and low work function, essential for photocatalysis. Yet, HP‐NCs face limitations within this domain because they are prone to chemical degradation when exposed to external factors like high temperature, polar solvents, oxygen, and light. A practical approach toward stabilizing HP‐NCs involves hybridizing them with a chemically inert material that can provide steric stabilization and act as a cocatalyst. Transition‐metal dichalcogenides emerge as outstanding candidates to sterically stabilize the HPs as they are stable, chemically inert, and can serve as co‐catalysts, enabling suppressed charge recombination. Herein, the photocatalytic performance of Cs4PbBr6/WS2‐nanocomposites towards organic dye degradation in polar solvents under visible light illumination is investigated. We found that the presence of WS2 nanostructures significantly stabilizes the HP‐NCs and promotes dye degradation rate compared to pristine Cs4PbBr6‐NCs. Using transient absorption measurements, we found that the WS2‐nanostructures act as an electron transport channel, effectively reducing charge recombination in the NCs. These findings pave the way for implementing Cs4PbBr6/WS2‐nanocomposites as stable and superior photocatalysts.
Halide perovskite nanowires (HP‐NWs) exhibit fascinating optical properties, making them attractive for advanced technologies. However, instability and lack of an effective synthetic protocol limit their commercialization. To address this, nanoporous anodized aluminum oxide (AAO) metamaterial is used as templates for the growth of CsPbBr3 NW arrays. AAO functions as a growth template and a stabilizing medium. The NW array exhibits strong light‐trapping ability, and the pore geometric features (pore radius‐R and distance between pores‐d) can potentially enhance the light‐matter interactions (LMI). The impact of R and d on LMI within the AAO/CsPbBr3 system using theoretical finite difference time domain (FDTD) simulations is demonstrated for the first time. Optimal LMI is observed with R = d = 25 nm and 50 nm. Ligand‐free synthesis of CsPbBr3 NW arrays via spin‐coating, drop‐casting, and inverse temperature crystallization (ITC) is reported. While spin‐coating and drop‐casting results in poor pore filling, the modified ITC method achieves >90% pore filling with significant NW lengths. These findings highlight the potential of AAO templates for protecting CsPbBr3 and addressing synthetic challenges in HPs and other semiconductor NW arrays. This study provides key insights for LMI in HPs and advances NW array‐based optical devices and renewable energy applications.
This work explores the effect of Eu doping techniques on CsPbBr 3 NCs. In-situ doping allows Eu 3+ incorporation into the lattice and enhances optocatalytic properties, while ex situ sonochemical doping results in surface-bound Eu with limited effects.
Zero-dimensional (0D) and three-dimensional (3D) halide perovskite nanocrystals (HP-NCs), owing to their unique optoelectronic properties, are extensively studied for photocatalytic activity. However, HPs are highly sensitive to light, humidity, and other environmental factors, which accelerate their decomposition. Understanding the decomposition process is crucial for gaining insights into how to stabilize HP-NCs. Here, we investigate the radical-driven decomposition process and dynamics of the 0D C4PbBr6 and 3D CsPbBr3 NCs under the influence of visible light and a polar solvent by electron paramagnetic resonance (EPR) spectroscopy. Our findings indicate that light accelerates radical formation over time, making the decomposition of HP-NCs a self-sustaining process. Upon illumination of the NCs, hydroperoxyl radicals are formed first, followed by unconventional Br, Cs, and Pb-related radicals, indicating the initiation of NC decomposition. The decomposition of CsPbBr¬3 NCs starts after 3 min of light exposure, while C4PbBr6 NCs take 18 min, indicating the greater stability of the latter. Additionally, we evaluated the photocatalytic activity of the HPs toward degrading organic dyes. The 3D CsPbBr3 NCs performed as superior photocatalysts compared to their 0D Cs4PbBr6 NCs counterparts. Yet, linking the results of EPR measurements with the photocatalytic efficacy suggests that the CsPbBr3 NCs undergo degradation during the photocatalytic process, thereby serving as a sacrificial agent to enhance photocatalytic activity. The understanding derived from EPR spectroscopy in tracking radical formation and dynamics can be extended to enhance the stability and efficiency of various nanomaterials in optoelectronic and photocatalytic applications, thus contributing to advancements beyond the HP family.
Halide perovskite nanowires (HP-NWs) exhibit fascinating optical properties, making them attractive for advanced technologies. However, instability and lack of an effective synthetic protocol limit their commercialization. To address this, we use nanoporous anodized aluminum oxide (AAO) metamaterial as templates for the growth of perovskite (CsPbBr3) NW arrays. AAO functions as both growth template and stabilizing medium. The NW array exhibits strong light-trapping ability, the pore geometric features (pore radius-R and distance between pores-d) have the potential to enhance the light-matter interactions (LMI). We demonstrate the impact of R and d on LMI within the AAO/CsPbBr3 system using theoretical Finite Difference Time Domain (FDTD) simulations for the first time. Optimal LMI was observed with R=d=25 nm and R=d=50 nm. We report ligand-free synthesis of CsPbBr3 NW arrays via spin-coating, drop-casting, and inverse temperature crystallization (ITC). The spin-coating and drop-casting yielded poor pore filling while the modified ITC method yielded nearly complete (>90%) pore filling with significant NW lengths. Our findings highlight the potential of AAO templates for protecting CsPbBr3 and addressing synthetic challenges in HPs and other semiconductor NW arrays. This study provides valuable references for LMI in HPs and advances HPs and NW array-based optical devices and renewable energy applications