Key Laboratory of Multifunctional Materials and Structures Electronic Materials Research Laboratory Key Laboratory of the Ministry of Education & International Center for Dielectric Research School of Electronic Science and Engineering Faculty of Electronic and Information Engineering Xi'an Jiaotong University Xi'an China
Auto-generated profile, based on publicly available information
Zhenrong Li
Key Laboratory of Multifunctional Materials and Structures Electronic Materials Research Laboratory Key Laboratory of the Ministry of Education & International Center for Dielectric Research School of Electronic Science and Engineering Faculty of Electronic and Information Engineering Xi'an Jiaotong University Xi'an China
The dielectric, piezoelectric and ferroelectric properties of (1 − x)(Bi0.5Na0.5)TiO3–xSrTiO3 ceramics are systematically studied to investigate their relaxor ferroelectric behaviours driven by thermal and compositional changes.
1 April 2010 in Journal of the American Ceramic Society
In this paper, temperature dependance of induced dielectric and piezoelectric properties in the [001]-oriented predirect current poling (DCP) of the 0.25Pb(In1/2Nb1/2)O3-0.43Pb(Mg1/3Nb2/3)O3-0.32PbTiO3 (0.25PIN-0.43PMN-0.32PT) single crystals near morphotropic phase boundary was investigated using the alternating current treatment (ACT). By the optimized ACT conditions of 1 kV/mm at 50 Hz over 20 cycles, the dielectric permittivity (ɛ33T/ɛ0) and piezoelectric coefficient (d33) at room temperature of the DCP-ACT crystal were improved to be 7120 and 2610 pC/N, which were 48% and 54% higher than that of the DCP crystal (ɛ33T/ɛ0 = 4800, d33 = 1700 pC/N). Based on the temperature dependence of dielectric permittivity and dielectric loss of the DCP-ACT crystal, the induced monoclinic phases (MA and MC) were involved in the phase transition process from a rhombohedral phase to a tetragonal phase. The phase transition temperatures TR-MA of 116 °C of the DCP-ACT crystal showed about 10 °C higher than that of DCP. Meanwhile, ɛ33T/ɛ0 of the DCP-ACT crystal at TR-MA and in the tetragonal phase region, at around 110 °C and 130 °C, were 160% and 390% higher than those of the DCP crystal, respectively. The ultrahigh ɛ33T/ɛ0 = 17 000 of the DCP-ACT crystal at 130 °C may relate to the nanoscale heterogeneous polar-regions induced by ACT. The ACT is a promising way to enhance the dielectric and piezoelectric performance of the pre-DCP 0.25PIN-0.43PMN-0.32PT single crystals with broadened temperature range for device applications.
The phase transition and the phase stability in (PMN-0.32PT) single crystals under different electric fields were investigated over a temperature range from to using the dielectric property. Crystals with different orientations were used in the research. First, it is found that the intermediate monoclinic or orthorhombic phases are involved in the phase transition from the rhombohedral to tetragonal phase and that the appearance and stability of the intermediate phases as well as the phase path are strongly dependent on factors, such as the history of the sample and the direction and strength of the electric field. The transition behavior from the rhombohedral to tetragonal phase for the samples during the field-heating process is much more complex than that during the field-cooling process. Second, for the ferroelectric-to-paraelectric phase transition, it is found that the dielectric-constant peak actually reflects two processes: one is the ferroelectric relaxor process and the other is the tetragonal to cubic phase transition. The electric field shifts both transitions toward high temperature at different rates, which results in a “ -like” dielectric-constant peak in [111]-oriented samples. The results indicate that the polar regions in the ferroelectric relaxors should have a spontaneous polarization along the [111] direction. Finally, the temperature–electric field phase diagrams for crystals under electric field along different directions. It is also found that the piezoelectric activities are strongly related to the appearance of the intermediate phases.