1 July 2019 in IEEE Transactions on Automatic Control
This paper addresses the finite-time sliding mode control problem for a class of Markovian jump cyber-physical systems. It is assumed that control input signals transmitted via communication network are vulnerable to cyber attacks, in which the adversaries may inject false data in a probabilistic way into the control signals. Meanwhile, there may exist randomly occurring uncertainties and peak-bounded external disturbances. A suitable sliding mode controller is designed such that state trajectories are driven onto the specified sliding surface during a given finite-time (possibly short) interval. A key feature is that a set of mode-dependent sufficiently small scalars are introduced into some coupled Lyapunov inequalities such that the feasible solutions are easily obtained for the stochastic finitetime boundeness of the closed-loop systems. Finally, the practical system about a single-link robot arm model is given to illustrate the present method.
1 March 2022 in IEEE/ASME Transactions on Mechatronics
This article proposes a novel periodic event-triggered terminal sliding mode speed regulation scheme for the networked permanent-magnet synchronous motor (PMSM). The novel speed regulation strategy combines advantages of both terminal sliding mode control (TSMC) and periodic event-triggered mechanism. The satisfied speed regulation performance can be guaranteed by using TSMC to compensate the external disturbances and parameter uncertainties. The communication burden between the central controller and the remote motor is reduced by the periodic event-triggered protocol. To reduce the chattering in the TSMC signal, an extended state observer (ESO) is further introduced to estimate all possible perturbations, in which the upper bound of the estimation error is analyzed explicitly. Then, a binary-based genetic algorithm (GA) is adopted to find the optimal observer parameters. A key challenge here is how to estimate the actual bound of the triggering error under the periodic event-triggered mechanism. To this end, an explicit selection criterion of the periodic sampling period is developed by utilizing the known constrained information of the PMSM. It is proven that the proposed novel periodic event-triggered TSMC with a proper selection of the control gain can guarantee the reachability of the sliding region and the ultimate boundedness of the regulation errors simultaneously. Finally, the effectiveness of the proposed novel periodic event-triggered TSMC via a GA-optimized ESO is demonstrated in both simulation and experiment results for a real PMSM platform.
12 June 2017 in IEEE Transactions on Systems, Man, and Cybernetics: Systems
The finite-time sliding mode controller design problem of a class of conic-type nonlinear systems with time-delays and mismatched external disturbance is studied. The time-delay conic nonlinearities are considered to lie in a known hypersphere with an uncertain center. A scalar selection criterion dependent sliding mode control (SMC) law is constructed to drive the state trajectories onto the specified sliding surface during any assigned short time interval. By using slack matrix approach, a delay-dependent sufficient condition is derived to ensure the finite-time boundedness of the closed-loop systems over the finite-time interval. Then, the algorithm for designing the finite-time SMC law is established. Finally, two examples related to the time-delayed Chua's circuit is given to demonstrate the effectiveness of the developed methods.
27 February 2019 in IEEE Transactions on Fuzzy Systems
This paper focuses on the sliding mode control (SMC) problem of interval type-2 (IT2) fuzzy systems subject to the unmeasurable state and cyber attacks. A key issue is how to design a state-observer under the constraint that only the bounds of membership functions are known. To this end, this work introduces two weighting factors to construct a new membership function. Besides, the concept of input-to-state stability (ISS) is utilized to deal with the residual term resulting from the cyber attacks and external disturbances. The sufficient condition is established such that the sliding mode dynamics and the estimated error dynamics are input-to-state stable. Furthermore, by on-line estimating the unknown parameters in upper bounds of cyber attacks and external disturbances, an adaptive sliding mode controller is synthesized such that the reachability of the prescribed sliding surface can be guaranteed and the effect of cyber attacks on the system performance can be effectively attenuated. Finally, the validity of the proposed method is illustrated by a mass-spring-damper system.
8 January 2018 in IEEE Transactions on Automatic Control
This work deals with the exponential stabilization problem of discrete-time Markovian jump systems via a hybrid control strategy, in which the transition probability matrix and static output-feedback controller are designed simultaneously.A necessary and sufficient condition for the existence of an exponential stabilizing transition probability matrix is derived by means of a mode-dependent parametric approach. Furthermore,a sufficient condition is established for the above hybrid design with a specified lower bound on the decay rate. The proposed design approaches can be applied to solve two kinds of control design problems with practical constraints imposed on the hybrid design. Besides, an estimation approach is proposed on the decay rate and decay coefficient of the jump systems. Also, two optimization problems are formulated to obtain the hybrid control strategy. Finally, two numerical examples and a networkon-chip (NoC) based application are provided to illustrate the effectiveness of the proposed results.
27 August 2018 in IEEE Transactions on Automatic Control
This paper is concerned with the sliding mode control (SMC) problem for a class of uncertain discrete-time systems subject to unmatched external disturbances and communication constraints. In order to reduce the bandwidth usage between the controller and the actuators, the stochastic communication protocol (SCP) is utilized to determine which actuator should be given the access to the network at a certain instant. A key issue of the addressed problem is to design both the sliding surface and the sliding mode controller under the SCP scheduling. An updating rule on actuator input is first introduced and then a token-dependent SMC law is designed. Sufficient conditions are established for the resultant SMC systems such that not only the reachability with a sliding domain around the specified sliding surface is ensured, but also the stochastic stability with a prescribed H ∞ performance level is guaranteed. Based on these conditions, a set of coupled matrix inequalities is given to acquire the token-dependent parameter matrices in the proposed SMC law. Finally, a numerical example is presented to illustrate the effectiveness of the proposed H ∞ SMC scheme under the SCP scheduling.