Stretchable conductors are essential components in next-generation deformable and wearable electronic devices. The ability of stretchable conductors to achieve sufficient electrical conductivity, however, remains limited under high strain, which is particularly detrimental for charge storage devices. In this study, we present stretchable conductors made from multiple layers of gradient assembled polyurethane (GAP) comprising gold nanoparticles capable of self-assembly under strain. Stratified layering affords control over the composite internal architecture at multiple scales, leading to metallic conductivity in both the lateral and transversal directions under strains of as high as 300%. The unique combination of the electrical and mechanical properties of GAP electrodes enables the development of a stretchable lithium-ion battery with a charge-discharge rate capability of 100 mAh g−1 at a current density of 0.5 A g−1 and remarkable cycle retention of 96% after 1000 cycles. The hierarchical GAP nanocomposites afford rapid fabrication of advanced charge storage devices.
A novel strategy for introducing ion-permselective properties in a conventional polyethylene (PE) separator to inhibit the shuttle effect of polysulfides in high-performance lithium–sulfur batteries is reported. This was accomplished by taking advantage of the pH-responsive multilayers of weak polyelectrolytes such as poly(allylamine hydrochloride) (PAH) and poly(acrylic acid) (PAA) assembled on the PE separator using layer-by-layer (LbL) assembly. It was found that the cationic permselectivity (permeability of cation/anion) of an ultrathin multilayer coated separator is highly tunable with respect to the number of bilayers and external pH, benefiting from fine tuning of the internal charge density of the multilayered films. The movement of polysulfide anions was significantly inhibited by five bilayers of PAH/PAA (ca. 98% with multilayers assembled at pH 3/3), while the movement of Li cations was preserved. As a result, the ion-permselective separator demonstrated a high initial reversible capacity of ca. 1418 mA h g−1 with multilayers assembled at pH 3/3 because of the good permselectivity and the enhanced wetting properties of the LbL treated separator for electrolytes, leading to a significantly improved Coulombic efficiency as compared to a conventional PE separator, i.e., almost 100% over 50 cycles. We anticipate that the permselectivity controllable coating method will be applied for various other membrane technologies.
13 November 2017 in ACS Applied Materials & Interfaces