El magnesio y sus aleaciones, que aún se encuentran en desarrollo, se usan en aplicaciones ortopédicas debido a su biocompatibilidad y propiedades mecánicas (similares al hueso), que los hacen adecuados para aplicaciones en biomateriales. El magnesio tiene potencial para ser usado en implantes biodegradables dada su capacidad de soportar los procesos de regeneración de tejidos. En consecuencia, se han desarrollado varias estrategias para mejorar las propiedades del magnesio. Los recubrimientos sobre magnesio se emplean para mejorar su citocompatibilidad y resistencia a la corrosión. Específicamente, el dióxido de titanio se puede usar como recubrimiento protector sobre el magnesio, con el fin de ayudar a regular la velocidad de degradación y superar algunos problemas que se encuentran cuando el magnesio es implantado en el cuerpo. Por tanto, en este artículo se realizó una revisión crítica para consolidar la literatura disponible acerca de recubrimientos de dióxido de titanio sobre aleaciones de magnesio para potenciales aplicaciones en biomateriales. En este documento se hace énfasis en los recubrimientos obtenidos por medio de la de la ruta sol-gel como técnica prometedora para aplicaciones biomédicas.
Introduction: Magnesium alloys have been known for its biocompatible characteristics and tissue restoration properties. On the other hand, TiO2 has been found to decrease the corrosion rates of the magnesium alloys. Objective: In this work, the dip-coating technique was used to coat the magnesium alloy with TiO2 particles in order to evaluate its corrosion resistance. Methodology: The particles were analyzed by Scanning Electron Microscopy (SEM) and visual inspection. Additionally, hydrogen evolution tests were performed to understand the effect of adding TiO2 in corrosion rates of Mg-alloys. Results: The results showed the positive effect of TiO2 in the improvement of the ASTM B107 AZ31B Mg alloys corrosion by an indirect measurement through hydrogen evolution tests. The bare ASTM B107 AZ31B showed a corrosion 29 times faster compared to the coated alloy. The thickness of the coatings obtained using the dip-coating method is thinner than 20 nm. Conclusions: TiO2 particles were aggregated on the surface of the ASTM B107 AZ31B alloy with a controlled speed. SEM images have shown the improvement of the coating when the H2O concentration in the sol increased. Another important parameter is the withdrawal speed during the dip-coat process which was found to be better at a speed of 3mm/min. Hydrogen evolution in the acid solution showed that coated ASTM B107 AZ31B has less hydrogen production during the corrosion test. The dip-coating technique can also be used to coat polypropylene discs entirely.
Recently, antibacterial materials have sparked a renewed interest in the fields of biomedical engineering and life sciences. The main purpose of this study was to evaluate the physicochemical properties of TiO2 nanoparticles with anatase phase and an average size of 24.1 ± 4.6 nm, graphene oxide (GO) obtained from the electrochemical method, and TiO2/GO hybrid nanomaterial. Thermogravimetric analysis (TGA) revealed the presence of oxygen functionalities in the GO structure and 23.2 % of TiO2 in the hybrid nanomaterial, as well as a strong interaction between the materials that can be observed in the micrograph of scanning electron microscopy (SEM). Antibacterial tests were performed using the macrodilution method. The results showed that, while GO did not decrease bacterial growth, TiO2 presented high bactericidal activity. In turn, the hybrid TiO2/GO nanomaterial did not show such activity. This result can be explained by the decrease in contact between TiO2 and bacterial cells due to the blocking of the active sites on the TiO2 surface by graphene oxide sheets. These results contribute to the ongoing discussion about the bactericidal properties of graphene oxide.