4 September 2025 in Nuclear Fusion
In this chapter, we review the progress in MHD stability, disruptions and control in magnetic fusion research that has occurred over the past (more than) one and a half decades since the publication by Hender et al in 2007 on the same topic as part of the update of ITER Physics Basis. During this period, remarkable progress has been achieved in the understanding of the basic physics and overall control of MHD instabilities through a wide spectrum of dedicated experiments, theory and modeling. The sawtooth activities are probably today one of the best understood of MHD events and very robust control schemes have been developed for reliable operation of tokamaks through core heating. Similarly, significant improvements have been achieved in understanding and control of neoclassical tearing modes, resistive wall modes or locked modes and their control through ECCD or error field control. The field of disruption prediction through application of artificial intelligence, machine learning or deep learning methods, which had already started at the time of the 2007 review, has progressed significantly due to general progress in these fields and application of newer, more sophisticated algorithms. However, although remarkable progress has been achieved in the field of Disruptions, their understanding, prediction, possible avoidance and mitigation still remain probably the most active fields of R&D globally in this field. This is especially because reactor grade machines like ITER and DEMO will be much less tolerant in respect of disruptions and runaway currents, and their occurrences must be either avoided altogether or minimized to an acceptable value without causing any significant hindrance to robust machine operations. This review is intended to present a broad spectrum of the R&D that has occurred in this field in support of ITER, which will also be of immense significance for all future machines, especially reactors like DEMO.
25 September 2023 in Nuclear Fusion
Disruptions lead to a rapid loss of thermal and magnetic energy and can cause large heat loads, mechanical forces, and the excitation of a beam of relativistic runaway electrons. The operation of tokamaks at high energy and plasma current requires the use of a mitigation system to limit such detrimental effects. Mitigation techniques rely mainly on the injection of a large amount of impurities to radiate the majority of the thermal and magnetic energies. Heat loads and electro-magnetic (EM) forces as well as their toroidal asymmetries can be greatly reduced by such measures. In this paper, a theory is lined out to explain the reduction of the global vertical force based on large toroidal halo currents that keep the current centroid stationary in the midplane. As a consequence, the vertical current moment, which is linked to the EM-force, is reduced. The theory is backed up by experimental observations in shattered pellet injection mitigated vertical displacement event experiments in ASDEX Upgrade (AUG) and JET as well as by 2D simulations with the extended MHD code JOREK. Scans in the boundary heat flux are carried out to estimate the correct scrape-off layer temperature and the influence of the fraction of conducted energy. Finally, predictive simulations for ITER confirm the reduction of the vertical force by the injection of impurities.
18 April 2024 in Nuclear Fusion
The pre-thermal quench (pre-TQ) dynamics of a pure deuterium ( ) shattered pellet injection (SPI) into a / JET H-mode plasma is studied via 3D non-linear MHD modelling with the JOREK code. The interpretative modelling captures the overall evolution of the measured density and radiated power. The simulations also identify the importance of the drifts of ablation plasmoids towards the tokamak low field side (LFS) and the impurities in the background plasma in fragment penetration, assimilation, radiative cooling and MHD activity in SPI experiments. It is found that plasmoid drifts lead to an about 70% reduction of the central line-integrated density (compared to a simulation without drifts) in the JET SPI discharge considered. Impurities that pre-exist before the SPI as well as those from possible impurity influxes related to the SPI are shown to dominate the radiation in the considered discharge. With inputs from JOREK simulations, modelling with the Lagrangian particle-based pellet code PELOTON reproduces the deviation of the SPI fragments in the direction of the major radius as observed by the fast camera. This confirms the role of rocket effects and plasmoid drifts in the considered discharge and reinforces the validity of the JOREK modelling. The limited core density rise due to plasmoid drifts and the strong radiative cooling and MHD activity with impurities (depending on their species and concentration) could limit the effectiveness of LFS SPI in runaway electron avoidance and are worth considering in the design of the ITER disruption mitigation system.
4 April 2024 in Plasma Physics and Controlled Fusion
In this paper, we revisit the physics of mitigated and unmitigated vertical displacement events (VDEs) and present a summary of present modelling efforts and code capabilities. While 3D MHD simulations of VDEs for AUG and JET are now approaching realistic plasma parameters (e.g. resistivity) and getting closer to experimental observations (e.g. CQ times and vessel forces), the time scales of ITER VDEs (∼500 ms) are still out of computational reach. Therefore, re-scaling of plasma parameters, model simplifications or demanding matrix pre-conditioning techniques are required. We describe such techniques and compare AUG, JET and ITER unmitigated VDE simulations in terms of the dynamics of the CQ and total vacuum vessel forces. In JET simulations, the safety factor (q 95) falls to unity during the current quench, which destabilizes a 1/1 kink mode. On the other hand, in AUG and ITER simulations, MHD activity is more effective preventing the drop of q 95, leading to comparatively smaller forces in these devices. We will also discuss the applicability of axisymmetric plasma simulations and their success on simulating mitigated disruptions. Finally we review the remaining modelling challenges and future plans for unmitigated disruptions. For example, MHD codes need to improve their scrape-off-layer modelling, such as including the limitation of the halo current to the ion saturation current. Although crucial, this remains numerically challenging even for axisymmetric simulations.
1 July 1994 in Plasma Physics and Controlled Fusion
The COMPASS-D tokamak has recently obtained H-mode plasmas in a single-null X-point configuration with no additional heating. Clear H-mode signatures have been observed including reduction in Dalpha light and the unmistakable appearance of ELMs and ELM-free periods. Recycling and gas puff can play crucial roles in achieving and terminating the H-modes. The emergence of distinct ELMs, from the apparently-random fluctuations, of the background Dalpha light, is usually one of progression, taking some 10s of ms rather than a sudden discontinuity. The relatively slow evolution allows for detail examination of important phenomena, such as improvements to confinement and fluid rotation. The H-mode quality improves with density, unless impurity accumulation becomes important. Improvements to the energy and particle confinement are observed and are accompanied by positive increases in the radial electric field at approximately=4 cm inside the last closed flux surface (LCFS). The ohmic powers in discharges with clearly defined H-modes have not been less, so far, than the power obtained from power threshold scalings from larger machines.
25 June 2024 in Physica Scripta
The presented data refer to the Shattered Pellet Injector (SPI) experiments carried out at JET in 2019–2020. This paper is a full journal version of the data originally presented as posters at TMPDM_2020 and EPS_2021. This paper presents various aspects of the interaction of pellets with plasma and associated disruptions. The experiment was performed with I
p
= (1.1–3.1) MA plasmas and mainly with Ne + D2 pellet composition, but also with Ar pellets. The Current Quench (CQ) time, τ 80−20, is the key characteristic of mitigation effectiveness. A pellet with a high content of Ne or Ar can reduce the CQ duration below the upper required JET threshold. Plasmas with high (thermal + internal poloidal magnetic) pre-disruptive plasma energy require a high content of Ne pellets to obtain a short CQ duration. Pellets with a small amount of Ne (and accordingly large amount of D), instead of causing a mitigated CQ, create the conditions for a ‘cold’ Vertical Displacement Events (VDE). The SPI was applied to plasma with different status: mainly to normal (‘healthy’) plasma, i.e. not prone to disruption, post-disruptive and VDE plasma. This study shows that SPI effectiveness in terms of CQ duration and, accordingly, EM loads does not depend on the state of the plasma, whether it is ‘healthy’ or post-disruptive plasma. SPI has been shown to reduce the axisymmetric vertical vessel reaction forces by about (30–40) % compared to unmitigated disruptions. On JET, the VDE, whether ‘hot’ or ‘cold’, always creates the conditions for a toroidal asymmetry in the plasma, so the VDE on the JET is referred to as Asymmetric VDE (AVDE). The interrupting of VDE and prevention of AVDE with SPI has been demonstrated. Thus, the effectiveness of disruption mitigation using SPI has been confirmed.