This study was developed based on in vivo investigation of microporous granular biomaterials based on calcium phosphates, involving matrices of β-tricalcium phosphate (β-TCP), hydroxyapatite (HA), biphasic compositions of both phases and a control group. The physicochemical characterization of materials was carried out by X-Ray diffraction (DRX) and mercury porosimetry. Biodegradability, bioactivity and neoformation processes were investigated by Raman spectroscopy, scanning electron microscopy (SEM) and polarized light conducted on biopsies obtained from in vivo tests for periods of 90 and 180 days. These were performed to evaluate the behavior of granular microporous compositions in relation to bone neoformation. Through the performance obtained from in vivo assays, excellent osseointegration and bone tissue neoformation were observed. The results are encouraging and show that the microporous granular biomaterials of HA, β-TCP and biphasic compositions show similar results with perfect osseointegration. Architectures simulating a bone structure can make the difference between biomaterials for bone tissue replacement and repair.
Nanostructured calcium phosphate and biphasic calcium phosphates have been studied and stand out as biomaterials for bone regeneration. This is due to the fact that thesebiomaterials present bioactivity and morphological, chemical and crystallographic similarities to the bone apatite. The aim of the present work has been the synthesis and characterization of two calcium phosphates with Ca/P=1.5 e 1.67 as molar ratio. These were synthesized through the chemical wet process. After synthesis, the hydrated calcium phosphate powders were subsequently calcined at temperatures of 900°C/2h providing b-calcium phosphate (b-TCP) and hydroxyapatite (HA) powders. These powders were used to elaborate the biphasic powders in the wt.% ratios HA/b-TCP as follows: 80/20, 20/80, 70/30 and 30/70. The method used for the elaboration of the b-tricalcium phosphate nanostructured powder, hydroxyapatite and biphasic compositions was the attrition milling. The nanostructured powders obtained were characterized by the scanning electron microscopy technique, X-ray diffractometry. Infrared spectroscopy and Specific surface using BET model
The present research paper centers on physicochemical characterization of six nanostructured alloplastic bone substitutes developed at Santa Catarina State University (UDESC Brazil). In addition to identifying the main phases, the focus was to measure the morphological and microstructural features, which are believed to be crucial for controlling and guiding biological and molecular events. The studied samples exhibited rounded granules measuring 200μm 10(PO4)6(OH)2] was found as main phase for HAp, BCP and HAp/Al2O3 biomaterials. For HAp/TiO2n, HAp/SiO2n and β-TCP, the major phase was beta tricalcium phosphate [Ca3(PO4)2-β]. The results demonstrate that the presence of a second phase of nanometer order, at a hydroxyapatite bioceramic matrix, may modify the surface diffusion of the grains and the phase transformation kinetics of hydroxyapatite and beta tricalcium phosphate at temperatures up to 1100°C.