1 January 2007 in Matéria (Rio de Janeiro)
The aim of this work was to perform thermal characterization of commercially pure titanium in dry air to determine its oxidation kinetics and the structure of the oxide. The oxidation kinetics were determined thermogravimetrically under isothermal conditions in the temperature range 300 to 750 ºC for 48 hours and the structure of the oxides was determined by differential thermal analyses and X-ray diffraction in the temperature range room temperature - 1000ºC. The oxidation rate of titanium increased with increase in temperature. It was high in the initial stages of oxidation and then decreased rapidly with time, especially up to 600 ºC. The kinetic laws varied between inverse logarithmic at the lower temperatures (300 and 400 ºC) and parabolic at the higher temperatures (650, 700 and 750 ºC). Evidences from X-ray diffraction and differential thermal analyses data revealed that the passive oxide film formed at room temperature crystallized into anatase at about 276 ºC. The crystallized oxide formed in the range 276 - 457 ºC consisted of anatase, in the range 457 - 718 ºC consisted of anatase and rutile sublayers, and at temperatures beyond 718 ºC consisted of a layer of pure rutile. Scanning electron microscopy observations reveled that the oxidized surfaces were crack-free and the surface roughness increased steadily with oxidation temperature.
1 April 2012 in American Journal of Biomedical Engineering
ELEnori Gemelli Sarah A. de Lima
Enori Gemelli Sarah A. de Lima
1 September 2007 in Materials Research
Thermal characterization of commercially pure titanium was carried out in dry air to investigate the oxidation kinetics, the oxide structures and their properties. Oxidation kinetics were performed by thermogravimetry in isothermal conditions between 300 and 750 °C for 48 hours and the oxide structures were studied by differential thermal analyses and X ray diffraction between room temperature and 1000 °C. The oxidation kinetic increases with temperature and is very fast in the initial period of oxidation, decreasing rapidly with time, especially up to 600 °C. Kinetic laws varied between the inverse logarithmic for the lower temperatures (300 and 400 °C) and the parabolic for the higher temperatures (650, 700 and 750 °C). Evidences from X ray diffraction and differential thermal analyses showed that crystallization of the passive oxide film, formed at room temperature, into anatase occurs at about 276 °C. The crystallized oxide structure is composed of anatase between 276 and 457 °C, anatase and rutile sublayers between 457 and 718 °C, and a pure layer of rutile after 718 °C. Rockwell-C adhesion tests reveled that the oxide films formed up to 600 °C have a good adhesion. Vickers indentations on the oxidized surfaces showed that the hardness of the oxide film, measured at 600 and 650 °C, is approximately 9500 MPa. At these temperatures the surface roughness varied between 0.90 and 1.30 mm
19 May 2017 in Biomaterials Science
This study was developed based on in vivo investigation of microporous granular biomaterials based on calcium phosphates, involving matrices of β-tricalcium phosphate (β-TCP), hydroxyapatite (HA), biphasic compositions of both phases and a control group. The physicochemical characterization of materials was carried out by X-Ray diffraction (DRX) and mercury porosimetry. Biodegradability, bioactivity and neoformation processes were investigated by Raman spectroscopy, scanning electron microscopy (SEM) and polarized light conducted on biopsies obtained from in vivo tests for periods of 90 and 180 days. These were performed to evaluate the behavior of granular microporous compositions in relation to bone neoformation. Through the performance obtained from in vivo assays, excellent osseointegration and bone tissue neoformation were observed. The results are encouraging and show that the microporous granular biomaterials of HA, β-TCP and biphasic compositions show similar results with perfect osseointegration. Architectures simulating a bone structure can make the difference between biomaterials for bone tissue replacement and repair.
1 October 2011 in Materials Characterization
26 September 2016 in Journal of Materials Chemistry B
Calcium phosphates (CAPs) can be produced from either biologically sourced materials or mineral deposits. The raw materials impart unique properties to the CAPs due to innate trace amounts of elements that affect the crystal structure, morphology and stoichiometry. Using calcium carbonate (CaCO3) precursors derived from fossilized calcareous marine sediments (FCMSs), we have synthesized a novel class of CAP biomaterials, termed fm-CaPs, with defined Ca/P molar ratios of 1.4 and 1.7 using a wet synthesis method. Compared with commercially available CAP biomaterials, such as hydroxyapatite (HA) and beta-tricalcium phosphate (β-TCP), fm-CaP1.7 had a biphasic composition consisting of an HA phase (in a hexagonal system) and a β-TCP phase (in a rhombohedral crystalline system), which is desirable for the current design of bone substitutes, whereas fm-CaP1.4 consisted of an HA phase and a beta-dicalcium pyrophosphate phase (in a tetragonal system). These bioceramics exhibited a fringe structure of regular crystallographic orientation with well-ordered mesoporous channels. The FCMS raw material imparted trace amounts of silicon (Si), strontium (Sr) and zinc (Zn) to fm-CaPs; these are elements that are important for bone formation. The cyto-compatibility of these biomaterials and their effects on cellular activity were evaluated using osteoblast cells. Cell proliferation assays revealed no signs of cytotoxicity, whereas cells growth was equal to or better than HA and β-TCP controls. The SEM analysis of the cell and material interactions showed good cell spreading on the fm-CaP materials that was comparable to β-TCP and in vitro assays suggested robust osteogenic differentiation, as seen by increased mineralization (alizarin red) and upregulation of osteogenic gene expression. Our results indicate that fm-CaP1.7, in particular, has chemical, physical and morphological properties that make this material suitable for applications that promote bone tissue regeneration.