Lei Chen

Lei Chen

Auto-generated profile, based on publicly available information

Lei Chen

Shandong Key Laboratory of Biomass Efficient Conversion and Utilization, Energy Research Institute, Qilu University of Technology (Shandong Academy of Sciences), Jinan 250014, China

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 September 2020 in Catalysts
Verified
Journal Article
Open access
PDF file
LSLaizhi Sun
Laizhi Sun
ZWZhibin Wang
Zhibin Wang
LCLei Chen
Lei Chen
SYShuangxia Yang
Shuangxia Yang
XXXinping Xie
Xinping Xie
DHDongliang Hua
Dongliang Hua
Mo-modified ZSM-5 catalysts were prepared and used to produce aromatic hydrocarbons during catalytic fast pyrolysis (CFP) of biomass. The composition and distribution of aromatics were investigated on pyrolysis–gas chromatography/mass spectrometry (Py-GC/MS). The reaction factors, such as the Mo content, the reaction temperature and the catalyst/biomass mass ratio, were also optimized. It was found that the 10Mo/ZSM-5 catalyst displayed the best activity in improving the production of monocyclic aromatic hydrocarbons (MAHs) and decreasing the yield of polycyclic aromatic hydrocarbons (PAHs) at 600 °C and with a catalyst/biomass ratio of 10. Furthermore, according to catalyst characterization and the experiment results, the aromatics formation mechanism over Mo/ZSM-5 catalysts was also summarized and proposed.

9 September 2019 in Catalysts
Verified
Journal Article
Open access
PDF file
BZBaofeng Zhao
Baofeng Zhao
JWJingwei Wang
Jingwei Wang
DZDi Zhu
Di Zhu
GSGe Song
Ge Song
HYHuajian Yang
Huajian Yang
XXXinping Xie
Xinping Xie
Biomass thermochemical conversion with in situ CO2 capture is a promising technology in the production of high-quality gas. The adsorption competition mechanism of gas molecules (H2O, CO2, CO, CH4, and H2) on CaO-based catalyst surfaces was studied using density functional theory (DFT) and experimental methods. The adsorption characteristics of CO2 on CaO and 10 wt % Ni/CaO (100) surfaces were investigated in a temperature range of 550–700 °C. The adsorption energies were increased and then weakened, reaching their maximum at 650 °C. The simulation results were verified by CO2 temperature-programmed desorption (CO2-TPD) experiments. By the density of states and Mulliken population analysis, CaO doped with Ni caused a change in the electronic structure of the Osurf atom and decreased the C–O bond stability. The molecular competition mechanism on the CaO-based catalyst surface was identified by DFT simulation. As a result, the adsorption energies decreased in the following order: H2O > CO2 > CO > CH4 > H2. The increase of CO2 adsorption energy on the 10 wt % Ni/CaO surface, compared with the CaO surface, was the largest among those of the studied molecules, and its value increased from 1.45 eV to 1.81 eV. Therefore, the 10 wt % Ni/CaO catalyst is conducive to in situ CO2 capture in biomass pyrolysis.

22 July 2019 in Petroleum Science and Technology
Verified
Journal Article
Closed access
LCL. Chen
L. Chen
XZX. D. Zhang
X. D. Zhang
LSL. Z. Sun
L. Z. Sun
XXX. P. Xie
X. P. Xie
SYS. X. Yang
S. X. Yang
NMNing Mei
Ning Mei
Oil sludge is an organic solid waste produced in oilfield exploitation, transportation, and petroleum refineries. Pyrolysis is one of the most effective ways to reduce oil sludge and realize energy re-utilization. In the present work, the amounts and distributions of pyrolysis products at different reaction time and with different amounts of NiO catalyst were investigated with PY-GC/MS. The results suggest that the degree of the pyrolysis reaction increased and more macromolecules were degraded into smaller hydrocarbons as the reaction time prolonged. The addition of NiO catalyst effectively promoted the conversion of aromatic and paraffin products, and increased the production of small molecule olefins.

12 October 2023 in Polymers
Verified
Journal Article
Open access
PDF file
LCLei Chen
Lei Chen
XCXiangqian Chen
Xiangqian Chen
YZYuxiao Zhao
Yuxiao Zhao
XXXinping Xie
Xinping Xie
SYShuangxia Yang
Shuangxia Yang
TLTianjin Li
Tianjin Li
Torrefaction of biomass is one of the most promising pretreatment methods for deriving biofuels from biomass via thermochemical conversion processes. In this work, the changes in physicochemical properties and morphology features of the torrefied corn stalk, the changes in physicochemical properties and morphology features of the torrefied corn stalk were investigated. The results of this study showed that the elemental content and proximate analysis of the torrefied corn stalk significantly changed compared with those of the raw corn stalk. In particular, at 300 °C, the volatile content decreased to 41.79%, while the fixed carbon content and higher heating value increased to 42.22% and 21.31 MJ/kg, respectively. The H/C and O/C molar ratios of torrefied corn stalk at the 300 °C were drastically reduced to 0.99 and 0.27, respectively, which are similar to those of conventional coals in China. Numerous cracks and pores were observed in the sample surface of torrefied corn stalk at the torrefaction temperature range of 275 °C–300 °C, which could facilitate the potential application of the sample in the adsorption process and promote the release of gas products in pyrolysis. In the pyrolysis phase, the liquid products of the torrefied corn stalk decreased, but the H2/CO ratio and the lower heating value of the torrefied corn stalk increased compared with those of the raw corn stalk. This work paves a new strategy for the investigation of the effect of torrefaction on the physiochemical characteristics and pyrolysis of the corn stalk, highlighting the application potential in the conversion of biomass.

13 June 2023 in Catalysts
Verified
Journal Article
Open access
PDF file
DMDong Ma
Dong Ma
LSLaizhi Sun
Laizhi Sun
LCLei Chen
Lei Chen
SYShuangxia Yang
Shuangxia Yang
XXXinping Xie
Xinping Xie
DHDongliang Hua
Dongliang Hua
ZrO2 and catalysts were prepared by a co-precipitate method and coupled with a HZSM-5 zeolite catalyst through a mechanical mixing method; these were applied to the direct synthesis of aromatic hydrocarbons from syngas through an oxygen-containing intermediate route. The physical and chemical properties of the catalysts were characterized by XRD, H2-TPR, CO2-TPD, and SEM methods. The comparative catalytic effects of ZrO2 and MgZrOx catalysts were discussed under different reaction conditions. The reaction results showed that the addition of Mg to a ZrO2 catalyst reduced the selectivity of CO2 by inhibiting the water–gas conversion reaction, and increased the selectivity of aromatics and the proportion of BTX in aromatic products.

28 June 2023 in Catalysts
Verified
Journal Article
Open access
PDF file
SYShuangxia Yang
Shuangxia Yang
YLYu Li
Yu Li
LCLei Chen
Lei Chen
GXGuiying Xu
Guiying Xu
JHJianjun Hou
Jianjun Hou
DHDongliang Hua
Dongliang Hua
In the present work, LDHs-derived Ni–Al nanosheet arrays (NiAl/NA) were successfully synthesized via a one-step hydrothermal method, and applied in the steam-reforming of glycerol reaction for enhanced and stable hydrogen production. The physicochemical properties of catalysts were characterized using various techniques, including XRD, SEM–EDS, XPS, N2-physisorption, Raman, and TG–DTG. The results indicate that smooth and cross-linked Ni–Al mixed metal oxide nanosheets were orderly and perpendicularly grown on the Ni foam substrate. The SEM line scan characterization reveals the metal concentration gradient from the bottom to the top of nanosheet, which leads to distinctly optimized Ni valence states and an optimized binding strength to oxygen species. Owing to the improved reducibility and more exposed active sites afforded by its array structures, the NiAl/NA catalyst shows enhanced glycerol conversion (83.1%) and a higher H2 yield (85.4%), as well as longer stability (1000 min), compared to the traditional Ni–Al nanosheet powder. According to the characterization results of spent catalysts and to density functional theory (DFT) calculations, coke deposition is effectively suppressed via array construction, with only 1.25 wt.% of amorphous carbons formed on NiAl/NA catalyst via CO disproportionation.