Shandong Key Laboratory of Biomass Efficient Conversion and Utilization, Energy Research Institute, Qilu University of Technology (Shandong Academy of Sciences), Jinan 250014, China
Auto-generated profile, based on publicly available information
Shuangxia Yang
Shandong Key Laboratory of Biomass Efficient Conversion and Utilization, Energy Research Institute, Qilu University of Technology (Shandong Academy of Sciences), Jinan 250014, China
Biomass thermochemical conversion with in situ CO2 capture is a promising technology in the production of high-quality gas. The adsorption competition mechanism of gas molecules (H2O, CO2, CO, CH4, and H2) on CaO-based catalyst surfaces was studied using density functional theory (DFT) and experimental methods. The adsorption characteristics of CO2 on CaO and 10 wt % Ni/CaO (100) surfaces were investigated in a temperature range of 550–700 °C. The adsorption energies were increased and then weakened, reaching their maximum at 650 °C. The simulation results were verified by CO2 temperature-programmed desorption (CO2-TPD) experiments. By the density of states and Mulliken population analysis, CaO doped with Ni caused a change in the electronic structure of the Osurf atom and decreased the C–O bond stability. The molecular competition mechanism on the CaO-based catalyst surface was identified by DFT simulation. As a result, the adsorption energies decreased in the following order: H2O > CO2 > CO > CH4 > H2. The increase of CO2 adsorption energy on the 10 wt % Ni/CaO surface, compared with the CaO surface, was the largest among those of the studied molecules, and its value increased from 1.45 eV to 1.81 eV. Therefore, the 10 wt % Ni/CaO catalyst is conducive to in situ CO2 capture in biomass pyrolysis.
Torrefaction of biomass is one of the most promising pretreatment methods for deriving biofuels from biomass via thermochemical conversion processes. In this work, the changes in physicochemical properties and morphology features of the torrefied corn stalk, the changes in physicochemical properties and morphology features of the torrefied corn stalk were investigated. The results of this study showed that the elemental content and proximate analysis of the torrefied corn stalk significantly changed compared with those of the raw corn stalk. In particular, at 300 °C, the volatile content decreased to 41.79%, while the fixed carbon content and higher heating value increased to 42.22% and 21.31 MJ/kg, respectively. The H/C and O/C molar ratios of torrefied corn stalk at the 300 °C were drastically reduced to 0.99 and 0.27, respectively, which are similar to those of conventional coals in China. Numerous cracks and pores were observed in the sample surface of torrefied corn stalk at the torrefaction temperature range of 275 °C–300 °C, which could facilitate the potential application of the sample in the adsorption process and promote the release of gas products in pyrolysis. In the pyrolysis phase, the liquid products of the torrefied corn stalk decreased, but the H2/CO ratio and the lower heating value of the torrefied corn stalk increased compared with those of the raw corn stalk. This work paves a new strategy for the investigation of the effect of torrefaction on the physiochemical characteristics and pyrolysis of the corn stalk, highlighting the application potential in the conversion of biomass.
The key to selectively cleaving C–O bonds in lignin to produce high-value aromatic chemicals lies in the development of efficient and stable catalysts. In this study, a heterostructured catalyst with N-doped carbon-supported Co and dual-phase MoxC nanoparticles was prepared via the in situ pyrolysis of a Co–Mo–N precursor. The dual-phase α-MoC/β-Mo2C heterostructure is adjusted by varying the Co:Mo ratio to affect the structure and electronic properties of the catalyst. The heterostructures bring about enhanced electron transfer from Co to Mo, which promotes hydrogen dissociation over the Co sites, significantly improving the catalyst’s hydrogenolysis activity and stability. The optimal catalyst with Co1MoxC@NC exhibits excellent hydrogenolysis activity; under the optimal reaction conditions (260 °C, 1 MPa H2, 3 h), the yield of aromatic monomers reaches 28.5%. Such prominent performance not only benefits from the numerous α-MoC/β-Mo2C hetero-interfaces that offer abundant active sites for hydrogen dissociation, but also should be ascribed to the strong synergistic effect between Co and Mo.