Electrochemical water splitting plays a vital role in facilitating the transition towards a sustainable energy future by enabling renewable hydrogen (H2) production, energy storage, and emission‐free transportation. Developing earth‐abundant electrocatalysts with outstanding overall water‐splitting performance, excellent catalytic activity, and robust long‐term stability is highly important in the practical application of water electrolysis. Self‐supported electrocatalysts have emerged as the most appealing candidate for practical H2 production due to their increased active site loading, rapid mass and charge transfer, and strong interaction with the underneath conducting support. Additionally, these electrocatalysts also provide enhanced reaction kinetics and stability. Here, a comprehensive review of recent progress in developing self‐supported Fe‐based electrocatalysts for water splitting and selective oxidation reactions is presented with examples of oxyhydroxides, layered double hydroxides, oxides, chalcogenides, phosphides, nitrides, and other Fe‐containing electrocatalysts. A comprehensive historical development in the synthesis of self‐supported Fe‐based electrocatalysts is provided, with an emphasis on the various deposition methods and the choice of self‐supported conducting substrates considering large‐scale commercial applications. An overview of mechanistic understanding and approaches for enhanced H2 production are also presented. Finally, the challenges and opportunities associated with developing Fe‐based electrocatalysts for practical applications in water splitting and alternative oxidation reactions are discussed.
A piezoelectric nanogenerator (PNG) that is based on c-axis GaN nanowires is fabricated on flexible substrate. In this regard, c-axis GaN nanowires were grown on GaN substrate using the vapor-liquid-solid (VLS) technique by metal organic chemical vapor deposition. Further, Polydimethylsiloxane (PDMS) was coated on nanowire-arrays then PDMS matrix embedded with GaN nanowire-arrays was transferred on Si-rubber substrate. The piezoelectric performance of nanowire-based flexible PNG was measured, while the device was actuated using a cyclic stretching-releasing agitation mechanism that was driven by a linear motor. The piezoelectric output was measured as a function of actuation frequency ranging from 1 Hz to 10 Hz and a linear tendency was observed for piezoelectric output current, while the output voltages remained constant. A maximum of piezoelectric open circuit voltages and short circuit current were measured 15.4 V and 85.6 nA, respectively. In order to evaluate the feasibility of our flexible PNG for real application, a long term stability test was performed for 20,000 cycles and the device performance was degraded by less than 18%. The underlying reason for the high piezoelectric output was attributed to the reduced free carriers inside nanowires due to surface Fermi-level pinning and insulating metal-dielectric-semiconductor interface, respectively; the former reduced the free carrier screening radially while latter reduced longitudinally. The flexibility and the high aspect ratio of GaN nanowire were the responsible factors for higher stability. Such higher piezoelectric output and the novel design make our device more promising for the diverse range of real applications.
Porous materials have historically been of interest for a wide range of applications in thermal management, for example, in heat exchangers and thermal barriers. Rapid progress in electronic and optoelectronic technology necessitates more efficient spreading and dissipation of the heat generated in these devices, calling for the development of new thermal management materials. Here, we report an effective technique for the synthesis of porous Cu-graphene heterostructures with pores of about 30 μm and a porosity of 35%. Graphene layers were grown on the surfaces of porous Cu, which was formed via the coalescence of molten Cu microparticles. The surface passivation with graphene layers resulted in a thermal conductivity higher than that of porous Cu, especially at high temperatures (approximately 40% at 1173 K). The improved heat dissipation properties of the porous structures were demonstrated by analysis of the thermal resistance and temperature distribution of LED chips mounted on the structures. The effective combination of the structural and material properties of porous Cu-graphene heterostructures provides a new material for effective thermal management of high-power electronic and optoelectronic devices.