30 June 2011 in European Journal of Mechanics - A/Solids
5 November 2013 in International Journal of Materials Research
MBMohamed El Amine Belouchrani
Mohamed El Amine Belouchrani
In this paper, the characteristics of the oxide film formed on the surface of 2017A aluminium alloy by sulphuric oxidation are investigated. Morphological features on the oxide film are studied using scanning electron microscopy. Crystallographic details are obtained using X-ray diffraction. The composition of the oxide layer is estimated using wavelength dispersive X-ray spectrometry and Raman spectroscopy. Through systematic structure–property studies, the microstructure of the oxide layer is identified providing the incorporation of the alloying elements in the inner layer with a copper enrichment at the interface.
1 March 2017 in Materials Science and Engineering: A
MBMohamed El Amine Belouchrani
Mohamed El Amine Belouchrani
1 January 2010 in International Journal of Microstructure and Materials Properties
MBMohamed El Amine Belouchrani
Mohamed El Amine Belouchrani
In this work, the influence of the austenitic grain size (AGS) on the transformation induced plasticity (TRIP) was experimentally studied. The study was undertaken in the case of the martensitic transformation of a 35NCD16 steel. Transformation induced plasticity tests (TRIP tests) were carried out under various conditions of austenitisation leading to different grain sizes of austenite. Two studies have been performed leading to different observations. In the first study, where the heating rate during austenitisation was relatively fast (50°C/s), the results seem indicate that the transformation induced plasticity is higher when the austenitic grain size is smaller (Boudiaf et al., 2008). In the second study we have considered a slower heating rate during austenitisation (0.5°C/s) on specimens manufactured from another batch of the same steel. Different results were then obtained where TRIP increases slightly with the grain size. However, the uncertainties pointed out in assessing TRIP incite to be more careful. The work is still in progress in order to clarify the observed difference evaluating in particular the role of the heating rate during the austenitic transformation.
1 January 2022 in TURKISH JOURNAL OF CHEMISTRY
Polyurethane foams have good shock-absorbing properties. This article discusses the study of the physical, dynamic analysis, and microstructure of filled polyurethane foams (PUR). We used mineral fillings nanoparticles of titanium dioxide (TiO2) and calcium carbonate (C1) to support and strengthen the foam cell structure to develop shock absorption and thermal resistance properties. Dynamic mechanical analysis (DMA) and compression tests compared the mechanic characterization results with different modelling approaches. For studies of physicochemical properties, we used differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). We deduced the flame retardancy mechanism. It appears that a detailed description of the characteristics of viscosity and yield stress must take into consideration the filler's size in comparison to the cell wall's size. The effect of size distribution on the foam's microstructure was given by scanning electron microscopy (SEM). Half-open spherical cells were shown to be reduced in size with filling. The filler diffusion in polyurethane foams was used to model the composite foam. We observed that crystalline filler particles were uniformly distributed in the matrix, indicating that the total size is related to the density and is a crucial metric for the level of reinforcement.
26 September 2022 in Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
This paper aims to study the effect of hardness nitriding treatment on the overall mechanical behavior of Hardox 400 steel. A Plasma Immersion Ion Implantation (PIII) technique was used for material nitriding while a split Hopkinson pressure bar equipped with an electromagnetic heating system was used for the thermomechanical characterization of the studied steel. The collected data are analyzed to identify the combined effect of the high strain rates and elevated temperatures on the flow stress and ductility. The microstructure and the physical properties of the nitrided Hardox 400 were studied using scanning electron microscopy (SEM), X-ray diffraction, and nano-indentation tests. Although the increase of the surface hardness by 37%, the quasistatic and dynamic compression tests showed a decrease in the flow stress due to the microstructure modification caused by the increase of the temperature during the plasma nitriding process. For a better assessment of the experimental results, reduction factors for the main mechanical properties are reported. The test data from SHPB indicated a dependency of the strain rate to the temperature of untreated un-nitrided Hardox 400. Finally, a critical review of the well-known Johnson-Cook constitutive model is highlighted, where material parameters are calibrated with special attention to the thermal softening parameter. The obtained results could be of great interest for the assessment of structural components’ robustness where the combined strain rate and temperature for Hardox 400 are met.