1 February 2017 in International Journal of Impact Engineering
29 August 2023 in Thin-Walled Structures
8 February 2022 in Journal of Composite Materials
This work focuses on the mechanical behavior, at high strain rates, of metal-ceramic functionally graded materials (FGMs) using a Split Hopkinson Pressure Bar (SHPB) technique. The validity and the accuracy of the SHPB test results for these composite materials have not been meticulously studied due to their complex mechanical response under dynamic loadings. In this paper, numerical simulations of SHPB tests were performed to determine the dynamic response of specific FGMs at various strain rates. The effects of the compositional gradient exponent and the striker velocity, as well as increasing/decreasing stiffness through the thickness of the functionally graded specimen, were investigated. The considered material is composed of Titanium mono-boride ceramic (TiB) and Titanium metal (Ti) phases; the volume fraction (Vc) of the ceramic constituent varies through-thickness following a power-law distribution. The locally effective material properties were evaluated using a homogenization method based on the self-consistent method (SCM). The elastoplastic behavior of the FGMs under dynamic loading is described using dynamic Tamura-Tomota-Ozawa model (DTTO). The numerical simulations indicated that the compositional gradient exponent and striker velocity have significant effects on the dynamic response of the FGMs. On the other hand, the increasing/decreasing stiffness has a minor effect due to the low thickness of the experimental functionally graded specimen. Finally, the effect of the high strain rates the multiple interface reflection/transmission of the stress wave is very considerable for the design and the optimization of FGMs behavior under dynamic loading.
30 September 2015 in Problems of Mechatronics Armament Aviation Safety Engineering
7 September 2018 in EPJ Web of Conferences
This investigation aims to study the efficiency of STF impregnated plain-weave fabric made of Kevlar under high and low velocity impact conditions. The shear thickening fluid (STF) was prepared by ultrasound irradiation of silica nanoparticles (diameter ≈30 nm) dispersed in liquid polyethylene glycol polymer. STF impregnation effect was determined from single yarn pull-out test and penetration at low velocity using drop weight machine equipped with hemi-spherical penetrator and dynamic force sensor. Force-displacement curves of neat and impregnated Kevlar were analysed and compared. Also, the STF impregnation effect on Kevlar multilayers was analysed from high velocity impact tests using 9mm FMJ bullet at 390 m/s. After impact, Back face deformation (BFD) of neat and impregnated Kevlar layers were measured and compared. Results showed that STF impregnated fabrics have better energy absorption and penetration resistance as compared to neat fabrics without affecting the fabric flexibility. When relative yarn translations are restricted (e.g. at very high levels of friction), windowing and yarn pull-out cannot occur, and the fibres engaged with the projectile fail in tension that leads to fabric penetration. Microscopy of these fabrics after testing have shown pitting and damage to the Kevlar filaments caused by the hard silica particles used in the STF. Mesoscopic 3D Finite Element models were developed using explicit LS-DYNA hydrocode to account for STF impregnation by employing the experimental results of yarn pull-out tests, low and high velocity impacts. It was found that friction between fibers and yarns increase the dissipation of energy upon impact by restricting fiber mobility, increasing the energy required for relative yarn translations and transferring the impact energy to a larger number of fibers.
4 May 2022 in Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
Novel body armors are designed to protect against ballistic threats in the most vulnerable organs within the thorax and abdomen. Decreasing the armor weight without affecting its total integrity after the impact is one of the most challenging tasks. In this study, we combine advanced numerical simulations and experimental tests to investigate the ballistic performance of multilayered armor systems (MAS) consisting of laminated alumina (Al2O3) ceramic plates with multi-curve form and a hybrid composite backing. The ballistic trauma absorption and ceramic fracturing morphology are considered evaluation criteria. The investigation provides enough data on the measured trauma and the results are compared to advanced monolithic ceramics. The ballistic tests showed that bonding three or two ceramic plates with polymeric interlayer decreases considerably the eroded ceramic mass in comparison to monolithic ceramic tiles. Furthermore, the layup of two thin Al2O3 tiles with frontal confinement gives the same trauma-weight index as monolithic silicon carbide and reaction-bonded boron carbide plates. The combination of K129 and KM2 aramid weave fabrics decreases the composite backing weight by 33% and increases its ballistic performance in comparison to homogeneous aramid fabrics. Numerical simulations that involve the use of solid Lagrange and adaptive solid/smooth particles hydrodynamics (SPH) numerical approaches with detailed 3D models of the bullet and the MAS are presented in this work. Based on the statistical analysis, a better prediction of the back face deformation and bullet residual length is obtained by the adaptive solid/SPH method, which is found more suitable for the simulation of multilayered armor impact scenarios.