1 January 2024 in Tekstilna industrija
During mechanical recycling several mechanical treatments are used to degrade textile waste and make it ready for new application in different other industries. Mechanical recycling process consists of several work steps. Pre or post-consumer textile waste is firstly cut in small pieces by a shredding machine. Blending boxes with different storage capacities are used to blend cut textile waste. A feeding unit is placed in between a blending box and a tearing machine. Tearing machines separate individual fibers by tearing small pieces of shredded textile material apart. At the end of the textile recycling process the opened fibers are compressed in needed size bundles to store and transport for their further use. Insufficiently sorted waste is the most serious problem that complicates mechanical recycling processes, reduces the quality of recycled fibers. Currently there are not available efficient methods to recycle coated, laminated textiles and materials with elastan. Compared with other recycling methods the mechanical recycling of textile waste has already decades of experience, it is the most developed, most widely used, requires much lower investments and energy resources.
1 January 2025 in Tekstilna industrija
Chemically recycled textile waste can be used to manufacture new textile products. It can ensure up cycling process. Two groups of chemical recycling are: recycling at the polymer level and recycling at the monomer level. The basic steps of chemical recycling process are: preparation, cleaning and recycling of the waste. Chemical recycling technologies have been developed for the processing of cotton, polyester and poly-cotton. Currently, the most part of chemical recycling companies operate at their research centers and first pilot factories, and still improve their recycling methods. Chemical recycling technologies will be commercially effective in the next 5-10 years. Innovative textile waste recycling companies in Europe are: Renewcell/Circulose, Infi nite Fiber Company, SaXcell, Södra, Worn Again Technologies, Carbios (France), Erema.
1 January 2026 in Tekstilna industrija
The development of digital technologies has enabled the analysis of the behavior of clothing products in a virtual environment using 3D simulation. One of the important factors in these simulations is the digital avatar, whose characteristics can affect the interaction between clothing and the body. The aim of this work was to examine the influence of the avatar type and its surface characteristics on the clothing fit and stress distribution during 3D simulation. The simulation was conducted in the Browzwear V-Stitcher software on a dress model made of 100% cotton rib knit (2×2 rib) and interlock. The analysis included two types of avatars (hard and soft Olivia) and three types of avatar surfaces (human, plastic and fabric). The results show that the highest stress values are recorded in the chest area, while the differences between the avatar surfaces are relatively small. At the same time, it was observed that the deformability of the soft avatar affects the contact between clothing and the body and allows for a more natural fall and draping of the material compared to a rigid avatar.