1 January 2019 in Foundations of Management
The shopping service of the store plays an important role in shaping the opinions of customers in a store. Endless progress has been made on quality management of consumer services confirmed through numerous methods and standards that are based on consumers. A typical consumer receives a large amount of information in the shopping process. In the process of perception of this information, consumer must not only find necessary data, but also process, analyze, and evaluate this date, and weigh the pros and cons, relate it to his own needs, and at the end, make a decision: to buy or not to buy a certain product. All these reflect on consumer’s fatigue, stress, and other negative fallings obtained during any shopping. In this case, the buyer can make the wrong choice and the quality of his decisions would deteriorate. Therefore, investigation influence of store type on the emotional state of consumers in the urban purchase provides significant reserve for marketing development in this sphere. Research provides explanation of emotional fatigue on the type of stores. The regression models describing the shift in emotional state of the buyer in purchase process of different type of shops were obtained. Research was conducted in the residential area of Kharkiv, Ukraine. The presented model shows the average value of the indicator of the emotional system of buyers after shopping, which can be used to determine the likelihood of shopping on the basis of emotional fatigue.
28 December 2023 in Eastern-European Journal of Enterprise Technologies
The result of the conducted research is the development of a technology for the production of buckwheat groats using plasma-chemically activated aqueous solutions. The research object was buckwheat grain. An urgent technological problem is the preservation of biologically valuable components of buckwheat during technological operations and optimization of the existing technology for the production of buckwheat groats. The expediency of using plasma-chemically activated aqueous solutions as an intensifier of the technological process of production of buckwheat groats and an effective groats disinfectant has been experimentally proven. It is shown that the use of plasma-chemical activation of technological solutions allows reducing the temperature and accelerating the course of hydrothermal treatment of buckwheat grain. The composition of buckwheat grain as a raw material was analyzed. The obtained buckwheat groats were studied separately. A reduction in tempering time from 6–10 to 2 h and a decrease in the optimal moistening temperature from 60 to 40 °C were recorded. This allows preserving a number of biologically important components in buckwheat grain. The groats yield increases from 68 to 74 %, i.e. by 1.9–6.0 %. The preservation of the maximum number of amino acids is observed, namely, 7.7 % more than in the control. That is, only 2 % is lost during technological processing, instead of 9.7 % in the control sample. The vitamin composition also remains stable and almost does not decrease in terms of B1, B2, B3, B4, B5, B6, K, E, PP, R. In addition, plasma-chemically activated solutions qualitatively disinfect grain raw materials during processing, which has a positive effect on further storage of buckwheat groats. The technology can be applied in the industrial production of high-quality buckwheat groats. The developed technology will receive special attention in the production of ecologically clean cereal products that are not contaminated with pathogenic microflora
27 December 2024 in Eastern-European Journal of Enterprise Technologies
The object of the study is the dependence of the technological indicators of the extruded system with an increased ALA content on the composition of the raw materials. The problem of the study is the need to increase the oxidative stability of the lipid component of extrudates, preserve their nutritional value and improve technological characteristics (in particular, porosity). An extruded system with an increased content of alpha-linolenic polyunsaturated fatty acid (ALA) based on a mixture of barley groats and flax seeds has been developed. The influence of flaxseed content on the technological parameters of model extruded systems, in particular porosity and oxidative stability of the lipid component, was studied. It was found that the rational content of flax seeds in the extrusion mixture is 7.0 %, providing the necessary porosity (80 %) and the induction period of accelerated oxidation at a temperature of 80 °C (10 hours). The proposed technological approach makes it possible to increase the shelf life of products while preserving nutritional value. The developed extruded system is promising for further implementation in the food industry, which will contribute to expanding the range of extruded products and increasing their market competitiveness. The effect of antioxidants – ascorbic and ferulic acids on the oxidative stability of lipids of the extruded system was studied: the content of ascorbic acid – 0.06...0.09 %, the content of ferulic acid – 0.10...0.15 %. The lipid component of the extruded system of the developed composition demonstrates a high level of oxidative stability (oxidation induction period – up to 22 hours). The obtained results indicate the possibility of using extruded systems with an increased ALA content to create specialized products with extended shelf life and reduced raw material costs
31 August 2023 in Eastern-European Journal of Enterprise Technologies
The way to solve the problem of correcting technological indicators, in particular porosity and moisture content, in extruded protein-fat systems based on soybean, rapeseed, hemp meal, and corn grits is considered. The peculiarity of the work is the substantiation of the rational ratio of the content of moisture and lipids in the raw components of the extrudate, which is an important aspect of rationalizing the composition and improving the texture of innovative extruded products based on the specified raw materials. The object of the research is technological indicators, in particular the porosity and moisture content of the extruded protein-fat system, depending on the moisture and lipid content in the raw components. A rational ratio of moisture content (10.5...12.5 %) and lipids (3.5...5.0 %) in the raw material for the extruded protein-fat system was determined. The use of refined palm olein as an oil product resistant to oxidative deterioration, which should be added to raw components in order to correct the technological properties of the finished product, is substantiated. The developed protein-fat system of reasonable composition has an advantage over a commercial similar product in terms of crude protein content (29.0 % vs. 8.2 %), porosity (130.0 % vs. 105.0 %) and cost ($ 916/t vs. $ 2,798/t). The obtained data are explained by the fact that a complex of components was used, some of which are production waste, with reasonable moisture and lipid content, which improved the technological characteristics of the extrudate. An applied aspect of using this scientific result is the possibility of rationalizing the extrusion process of oilseed meal to achieve the desired texture, porosity and stability of the lipid component of the product
30 August 2024 in Eastern-European Journal of Enterprise Technologies
The result of the implemented research is the development of a technology for sprouted lentil (lentil malt) production using cold plasma-treated aqueous solutions. The object of the study was lentil grain. The main technological task is to obtain high-quality lentil malt suitable for producing gluten-free beer and highly nutritious foods. The rationality of using cold plasma-treated aqueous solutions as an intensifier of lentil grain germination process and high-quality lentil malt disinfectant is experimentally proven. It is confirmed that using cold plasma-treated aqueous solutions can accelerate the process of lentil bean moistening by 2 times. The germination indicators of lentils also experienced positive changes, with germination energy increased by 8–16 %, germination capacity by 3–10 %, and sprout length by 12–29 %. An analysis of the amino acid composition of lentil grain and lentil malt was carried out. Thus, the experimental samples had an increased content of amino acids: non-essential by 2.7 %, essential by 3.6 %. There was also an increase in the content of B vitamins (B1, B2, B5, B9), as well as PP and C, which indicates an increased biological value of lentil malt obtained by the presented technologies. In addition, the work noted the steady antiseptic properties of activated aqueous solutions in relation to lentil malt. The intensive technology of obtaining lentil malt can be implemented in the industrial production of malt for the brewing industry. In addition, sprouted lentil beans have health-improving properties and can be used in the production of functional products. The presented technology of lentil bean malting will be in demand in the production of highly nutritious and healthy grain products and fermented beverages
17 June 2025 in Eastern-European Journal of Enterprise Technologies
The object of the study is the composition of the feed extrudate modified by the addition of dietary fiber and lipid sources. The problem to be solved is the optimization of the structural and mechanical properties of the feed extrudate through the rationalization of the addition of components. Regression models have been developed to accurately predict the ratio of modifying additives that provides the specified water resistance and swelling index. It has been experimentally established that the rational ratio of components – 4.0±0.1 % chicken fat and 6.0±0.2 % wheat bran – provides water resistance of 190.0±7.5 min, swelling index of 55.0±2.1 % and porosity of 60.0±2.2 %. The results are achieved due to the complex interaction between the components, where lipids form a hydrophobic barrier, and dietary fibers create a stable porous matrix, which is confirmed by regression models. Comparative analysis with a commercial analogue (“Roycher™ AQUA Carp Finish”) revealed competitive advantages of the developed extrudate: lower cost (310 USD/t versus 1050 USD/t). Structural and mechanical characteristics of the studied extrudates were similar. This makes the developed composition promising for industrial application. The results obtained are explained by the interaction of the protein-starch matrix with lipids and dietary fibers during extrusion, which is confirmed by statistically significant models. A distinctive feature of the study is a comprehensive approach to rationalizing the composition of the extrudate, which combines technological efficiency with economic feasibility. The extrudate of the developed composition can be used in the production of feed for aquaculture. Further research should be aimed at studying the long-term stability of product properties and adapting the technology to industrial conditions