23 March 2025 in Food Science and Technology
Sunflower oil is a strategically important product for Ukraine. One of the main issues affecting its quality during transportation and storage remains peroxide oxidation. Establishing minimum shelf life periods is a key step in ensuring the stable quality and safety of sunflower oil at all stages of the production and logistics chain. The article examines modern approaches to assessing the oxidative stability of oils, in particular the instrumental method of accelerated oxidation of samples using the Oxitest device. It is shown that traditional chemical methods, such as determining peroxide and anisidine values, are labor-intensive and require reagents, which limits their suitability for rapid quality control. To optimize the quality control procedure during storage, the effectiveness of a kinetic approach based on the Arrhenius and Eyring equations was investigated. For unrefined sunflower oil, induction periods determined using the OXISoft™ software were used to describe the kinetics, as well as rate constants of the oxidation reaction at temperatures of 363, 373, and 383 K. Based on the temperature dependence of ln k versus 1/T, the activation energy (84.99 kJ/mol) and pre-exponential factor were calculated. The dependence of ln (k/T) on 1/T was used to determine thermodynamic parameters: enthalpy (81.85 kJ/mol), entropy (–41.28 J/(K·mol)), and Gibbs free energy, whose values increased with temperature, confirming the non-spontaneous nature of the reaction. It was shown that increasing temperature from 288 to 298 K is accompanied by an increase in the oxidation rate and a reduction in the shelf life of the oil samples, calculated based on the dependence of log IP on T. The obtained results confirm the feasibility of using the Oxitest device combined with kinetic analysis for rapid, reagent-free, and environmentally safe assessment of oil oxidative stability, which is promising for modeling the minimum shelf life of oil products.
31 August 2023 in Eastern-European Journal of Enterprise Technologies
The way to solve the problem of correcting technological indicators, in particular porosity and moisture content, in extruded protein-fat systems based on soybean, rapeseed, hemp meal, and corn grits is considered. The peculiarity of the work is the substantiation of the rational ratio of the content of moisture and lipids in the raw components of the extrudate, which is an important aspect of rationalizing the composition and improving the texture of innovative extruded products based on the specified raw materials. The object of the research is technological indicators, in particular the porosity and moisture content of the extruded protein-fat system, depending on the moisture and lipid content in the raw components. A rational ratio of moisture content (10.5...12.5 %) and lipids (3.5...5.0 %) in the raw material for the extruded protein-fat system was determined. The use of refined palm olein as an oil product resistant to oxidative deterioration, which should be added to raw components in order to correct the technological properties of the finished product, is substantiated. The developed protein-fat system of reasonable composition has an advantage over a commercial similar product in terms of crude protein content (29.0 % vs. 8.2 %), porosity (130.0 % vs. 105.0 %) and cost ($ 916/t vs. $ 2,798/t). The obtained data are explained by the fact that a complex of components was used, some of which are production waste, with reasonable moisture and lipid content, which improved the technological characteristics of the extrudate. An applied aspect of using this scientific result is the possibility of rationalizing the extrusion process of oilseed meal to achieve the desired texture, porosity and stability of the lipid component of the product
28 October 2023 in Food Science and Technology
Questions of mathematical calculation of combined flour systems with improved amino acid composition have been studied. To create such systems, it is proposed to use secondary products of oilseeds processing – meal, namely soybean, linseed and sunflower. The expediency of using the indicated meals is substantiated. It is emphasized that in order to create scientific foundations and practical directions for the use of new raw materials in the production of flour products, comprehensive studies are needed to study its composition, physical and chemical properties, as well as the impact on the quality of finished products. The amino acid composition of the proteins of these meals and wheat flour was experimentally determined. Calculated amino acid score. Particular attention is paid to the mathematical calculation of the composition of oilseed meal, which, in terms of amino acid composition, is as close as possible to the reference protein. The mass fractions of soybean, flaxseed and sunflower meal proteins in the composition were determined, namely: 0.51, 0.2 and 0.29, respectively. The amino acid composition and the biological value of the protein of the obtained meal composition were established. It was shown that for such amino acids as lysine, the amount of sulphurous (methionine + cystine) and threonine amino acid score of combined flour systems increased by 0.7–2 times compared to that of wheat flour. The ratio of soybean, linseed and sunflower meal in the composition of the improved amino acid composition in percentage terms was obtained: 44:25:31. Mathematically calculated the content and rate of essential amino acids in systems, which in their composition contain 90–80% wheat flour and 10–20% composition of oilseed meal. The results of studies of such systems showed that the moisture index is almost the same, and the acidity index is slightly higher than the index (4.68 versus 3.03 degrees) for premium wheat flour. Trial baking of bread was carried out, it’s organoleptic, and physico-chemical parameters were determined in comparison with bread based on premium wheat flour. In a bread sample based on combined flour systems, the moisture content is 39.34%; porosity – 77.15%; acidity – 1.83 degrees. The characteristics of the developed systems make it easy to introduce it into the technological process of existing enterprises for the production of bakery products.
22 October 2021 in Food Science and Technology
The main methods of obtaining fractionated oils and fats have been analysed. They involve three essentially different processes of fractionation of acylglycerols: dry fractionation, aqueous fractionation with a detergent, and solvent fractionation. Considerable attention has been paid to determining the conditions for fractionation of sunflower oil modified in its fatty acid composition. It has been emphasised that using stearic sunflower oil free from trans fatty acids as a source of fats is a topical task. The practical importance of complex research on fractional crystallisation of stearic sunflower oil has been substantiated. The experiments have allowed establishing the fatty acid and triacylglycerol composition of the oil of the new line of sunflower seeds of the saturated type Х114В (stearic type). The structure of its acylglycerols has been mathematically determined. Data have been obtained that besides the increased stearic acid content (9.1% of the total fatty acids), the oil under study also contains a significant amount of the disaturated–monounsaturated fraction of acylglycerols (6.16%). The method of fractionating sunflower oil of the stearic type, which has been scientifically substantiated, involves one-stage fractional crystallisation from the melt. The conditions of fractional crystallisation have been experimentally established: the crystallisation temperature range (+6 – +9°С), the crystallisation time (38 days), and the cooling rate (≈0.0051°С/s). The target fraction of sunflower oil of the stearic type has been obtained. It differs from the original oil in its fatty acid and acylglycerol composition. The yield of this oil fraction was 24.57%. It has been found that the fatty acid composition of this fraction has a content of palmitic acid increased by 0.9% and that of stearic acid higher by 3.3%, while its linoleic acid content decreased to 41.9%. The total amount of saturated fatty acids in the target fraction sample is 19.8% of all fatty acids. It has been found that the proportion of disaturated–monounsaturated acylglycerols in the target fraction increases by 3.27%. The resulting target fraction will be useful in flour and confectionery technologies as a substitute for fats containing trans fatty acids
25 September 2024 in Food Science and Technology
The issue of determining the shelf life of sunflower meal using a kinetic approach has been considered. Sunflower meal is a byproduct of sunflower oil production and is actively used in agriculture as a high-calorie component of compound feeds for poultry, pigs, and cattle. The main value of meal lies in its high protein content (up to 44%), fiber, vitamins B and E, potassium, phosphorus, and other important minerals and organic substances. However, it contains up to 2% oil, which over time is prone to oxidation, potentially negatively impacting the product's quality and safety. The study proposes a method for predicting the oxidative stability of sunflower meal during long-term storage using the Arrhenius model, which describes the dependence of the reaction rate on temperature. The peroxide value was used to describe the kinetics of lipid oxidation in the meal. It was found that the oxidation reaction demonstrates clear zero-order kinetics, and the activation energy for the formation of primary oxidation products is 71.875 kJ/mol. A kinetic equation for the oil oxidation reaction in meal was developed, allowing for the calculation of the reaction rate constant at different temperatures. Calculations of the reaction rate constants at temperatures of 293, 298, and 303 K showed that oil oxidation in meal depends on temperature, with a temperature acceleration coefficient of the reaction equal to 2.65. The predicted shelf life of the meal at a temperature of 298 K was 13.1 months. The accuracy of the prediction was confirmed by measuring the peroxide value of the meal stored for 12 months at temperature of 293–303 K and a relative humidity of 35–45%. The proposed method allows, in a short period, to provide recommendations regarding storage periods to ensure high quality and safety of the product, considering different temperature conditions.
5 June 2025 in Food Resources
Предмет. Стабільні до окиснення композиції олій з поліпшеним жирнокислотним складом. Мета. Системний аналіз наукової літератури щодо створення композицій олій з поліпшеним жирнокислотним складом та стійких до окиснення. Методи. Системний аналіз наукової літератури проведено із застосуванням метрик провідних наукометричних платформ – Scopus, Web of Science, PubMed та ResearchGate. До аналізу включено рецензовані статті, опубліковані в період з 2015 по 2025 роки. Результати. Визначено, що для підтримання здоров’я серцево-судинної системи та оптимального ліпідного балансу в організмі людини важливо дотримуватися збалансованого співвідношення між моно- та поліненасиченими жирними кислотами, що має становити приблизно від 1:1 до 1,5:1. Крім того, необхідне правильне співвідношення незамінних жирних кислот ω-6 до ω-3, яке рекомендується у межах від 5:1 до 10:1. Огляд наукових джерел засвідчив, що більшість олій не мають ідеально збалансованого жирнокислотного профілю та характеризуються підвищеною чутливістю до окиснення, особливо за високого вмісту поліненасичених жирних кислот. У зв’язку з цим створення композиційних сумішей на основі різних видів олій розглядається як ефективний і економічно обґрунтований підхід для оптимізації харчової цінності, покращення фізико-хімічних властивостей та підвищення окисної стабільності. Раціональний підбір співвідношень компонентів у складі таких композицій дозволяє досягти більш збалансованого вмісту ω-3, ω-6 і ω-9 жирних кислот. Одночасно цей підхід сприяє зменшенню або повному усуненню потреби у використанні синтетичних антиоксидантів, що підвищує безпечність і натуральність кінцевого продукту. Сфера застосування результатів. Отримані результати досліджень можуть бути використані для розроблення композицій олій з метою підвищення їхньої термічної стабільності, що є надзвичайно важливим для забезпечення безпеки термічного оброблення харчових продуктів