1 January 2010 in Opto-Electronics Review
EKE. Kruszelnicki-Nowinowski
E. Kruszelnicki-Nowinowski
+4
A new accurate and fast interference method for determining ordinary and extraordinary refractive indices of nematic liquid crystals is presented and discussed. The method relies on microscopic measurements of distances between interference fringes appearing in polarised parallel coherent monochromatic light beam transmitted normally to the surfaces through a wedge cell filled with a nematic. Both glass plates confining the cell are coated with a partly transparent thin film of metal which is deposited by evaporation in vacuum. Owing to the multiple reflections between the surfaces and a small edge angle, the interference fringes observed near the wedge apex edge are sharp and equidistant. To apply this method one needs only small amount of an investigated liquid crystal. Basic mathematical formulae and results of an experiment are briefly discussed.
1 January 2012 in Opto-Electronics Review
A new method for quick and pretty accurate measurements of splay, twist and bend elastic constants of nematic liquid crystals is experimentally verified. The main concept relies on exploiting only the electric field and determining magnitudes of nematic elastic constants from threshold fields for Freedericksz transitions in only one hybrid in-plane-switched cell. In such cell the deformations of an investigated liquid crystal are controlled by three separated pairs of electrodes confining measurement domains. In two of them inter-digital electrodes are mounted on one cell cover. Splay, twist and bend elastic constants can be measured by a proper choice of electrodes’ configuration together with orienting cover coatings (without applying magnetic fields). In this paper, we describe layout of our cells and results of experimental tests by using different liquid crystals: 5CB and 6CHBT (with positive dielectric anisotropy), Demus’ esters (with negative dielectric anisotropy) and new liquid crystals mixtures produced in our university.
5 August 2013 in Journal of Applied Physics
There exists a problem in diagnostics of a dense plasma (so-called Thomson diagnostics). For this purpose, the plasma is illuminated by series of high energy laser pulses. Such pulses are generated by several independent lasers operating sequentially, and these pulses are to be directed along an exactly the same optical path. In this case, the energy of each separate pulse is as large as 3 J, so it is impossible to generate a burst of such pulses by a single laser. In this situation, several independent lasers have to be used. To form optical path with λ = 1.064 μm and absolute value of the energy of laser pulse through of 3 J, a special refractive index matched twisted Nematic Liquid Crystal Cell (NLCC) of type LCNP2 with switching on time τON smaller than 5 μs might be applied. High laser damage resistance of NLCC and short τON can be fulfilled by preparation of liquid crystal cells with Liquid Crystal Mixture (LCM), well tuned to twisted nematic electro-optical effect, and well tuned all optical interfaces (Air – Antireflection – Quartz Plate – Electrode – Blocking Film – Aligning Layer – LCM – Aligning Layer – Blocking Film – Electrode – Quartz Plate – Antireflection – Air). In such LCNP2 cell, the transmission is higher than 97% at λ = 1.064 μm, as it is presented by Gooch and Tarry [J. Phys. D: Appl. Phys. 8, 1575 (1975)]. The safe laser density energy is about 0.6 J/cm2 for a train of laser pulses (λ = 1.064 μm, pulse duration 10 ns FWHM, pulse repetition rate 100 pps, train duration 10 s), so the area of liquid crystal cell tolerating 3 J through it shall be as large as 5 cm2. Due to the presence of two blocking film layers between electrodes, LCNP2 can be driven by high voltages. Switching on time smaller than τON = 5 μs was obtained under 200 V switching voltage.
1 January 2012 in Opto-Electronics Review
Liquid crystal cell (LCC) for space-borne laser rangefinder to space mission applications was developed, manufactured and tested under cooperation between Military University of Technology (MUT) in Poland and Vavilov State Optical Institute (Vavilov SOI) in Russia. LCC operates in twisted nematic mode, commutating the polarization plane of a laser beam working at 1.064 μm and the energy density not smaller than 0,15 J/cm2 at the pulse duration about 8 ns. The transmission of LCC is not smaller than 95% at the aperture diameter not less than 15 mm. Switching on and switching off times in a 2.5-μm thick LCC driven by voltage of 10 V are not larger than 0.7 ms and 7 ms, respectively, in the operating temperature range from 20°C to 40°C. The LCCs developed in MUT were positively tested under space requirements in Vavilov SOI.
1 January 2014 in Opto-Electronics Review
Optical properties of a nematic liquid crystal with small refractive index and small birefringence were studied. The ordinary and extraordinary refractive indices and birefringence were measured as functions of temperature by using an Abbe refractometer and wedge nematic cells. From values of these indices the nematic orientational order parameter was calculated by using several methods and corresponding mathematical models. Kuczyński et al. method was found to be suitable for determining the order parameter also for materials featuring small ordinary refractive index, with unknown density.
1 December 2013 in Acta Physica Polonica A