1 February 2017 in Ocean Engineering
28 January 2010 in Science China Technological Sciences
1 January 2009 in International Journal of Fluid Mechanics Research
Wind tunnel testing of low-rise building models with flat, gabled and hip roof configurations was carried out in a boundary layer wind tunnel. All the models had the same mean height. For the gabled and the hip roofs, the pitch angles investigated were 15, 20, 30 and 45°. Pressure measurements were performed on all the walls and the roof of the building models facing a turbulent wind of 7 m/s and the values of pressure coefficient were calculated. It was found that the suction over the roof is significantly influenced by the roof configuration. The 45° gabled and hip building models performed the best under the same wind conditions. The peak suction over the roof reduces by 85 and 91%, respectively, compared to that over the flat roof. In addition to this, the hip roof models recorded less suction compared to their gabled counterparts. For the hip roof, the peak suction reduced by 42% compared to the gabled roof.
1 June 2018 in Ocean Engineering
1 December 2021 in Renewable Energy
16 May 2025 in IEEE Access
Recently, energy harvesting through human locomotion has emerged as a promising source of clean energy for fueling low-power smart electronic devices. As energy plays a pivoted role in all sectors, the prospect of harnessing clean energy from human footsteps has become a focal point in the quest for sustainable energy solutions. This article presents a comprehensive exploration of various kinetic energy harvesting technologies—such as piezoelectric, rack and pinion, triboelectric nanogenerators, human mounted, Pavegen, airflow-based, and fluid-flow based energy harvesting systems that are being employed to produce biomechanical energy from simple human motion. The systems require small displacements such as walking and movement of human limbs. The discussion explores the complexity of design, operating principles, and performance evaluations of these cutting-edge human motion energy harvesters. Furthermore, the article delves into a critical assessment of the limitations, benefits, and challenges confronting piezoelectric and electromagnetic energy harvesting technologies in the realm of low-power practical applications. The review indicates that piezoelectric flooring systems, rack and pinion harvesters, triboelectric nanogenerators and wave spring generators hold great promise for footstep energy harvesting. With improvements in piezoelectric materials, it is expected that the efficiency of footstep energy harvesters will improve and with the ongoing reduction in the power requirements of portable devices, they will be able to serve as a clean and mobile source of energy for such devices.