MgO is an attractive choice for carcinogenic cell destruction in photodynamic therapy, as confirmed by manifold analysis. The prime focus of the presented research is to investigate the toxicity caused by morphologically different MgO nanostructures obtained by annealing at various annealing temperatures. Smart (stimuli-responsive) MgO nanomaterials are a very promising class of nanomaterials, and their properties can be controlled by altering their size, morphology, or other relevant characteristics. The samples investigated here were grown by the co-precipitation technique. Toxicity-dependent parameters were assessed in a HeLa cell model after annealing the grown samples at 350 °C, 450 °C, and 550 °C. After the overall characterization, an analysis of toxicity caused by changes in the MgO nanostructure morphology was tested in a HeLa cell model using a neutral red assay and microscopy. The feasibility of using MgO for PDT was assessed. Empirical modelling was applied to corroborate the experimental results obtained from assessing cell viability losses and reactive oxygen species. The results indicate that MgO is an excellent candidate material for medical applications and could be utilized for its potential ability to upgrade conventionally used techniques.
In this study, different concentrations (0, 0.02, 0.04, and 0.06 wt%) of Mo doped onto La2O3 nanostructures were synthesized using a one-pot co-precipitation process.
Nanomaterials are being vigorously investigated for their use in anticancer drug delivery regimes or as biomarkers agents and are considered to be a candidate to provide a way to combat severe weaknesses of anticancer drug pharmacokinetics, such as their nonspecificity. Because of this weakness, a bigger proportion of the drug-loaded nanomaterials flow toward healthy tissues and result in undesirable side effects. It is very important to evaluate drug loading and release efficiency of various nanomaterials to find out true pharmacokinetics of these drugs.This observational study aims to evaluate various surface functionalized and naked nanomaterials for their drug loading capability and consequently strengthens the Reporting of Observational Studies in Epidemiology (STROBE). We analyzed naked and coated nanoparticles of transition metal oxides for their further loading with doxorubicin, a representative water-soluble anticancer drug.Various uncoated and polyethylene glycol-coated metal oxide nanoparticles were synthesized and loaded with anticancer drug using simple stirring of the nanoparticles in a saturated aqueous solution of the drug. Results showed that surface-coated nanoparticles have higher drug-loading capabilities; however, certain naked metal oxide nanoparticles, such as cobalt oxide nanoparticles, can load a sufficient amount of drug.
The prime focus of this investigation is to determine which morphology of magnesium oxide (MgO) is nontoxic and accumulates in sufficient quantity to a human brain cellular/tissue model. Thus, nanostructured MgO was synthesized from a coprecipitation technique involving twin synthetic protocols and the resulting product was characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), size distribution histogram, Fourier-transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD) analysis and elemental composition was confirmed by EDX analysis. They were tested for selective antigen response in a human brain cancer model through biodistribution, biotoxicity via MTT assay, and tissue morphology. In addition, the MRI compatibility of MgO nanostructures and immunofluorescence studies were investigated on nanoconjugates with different immunoglobulins in the brain section. The results indicated that MgO had some degree of bindings with the antigens. These results led to the empirical modeling of MgO nanomaterials towards toxicity in cancer cells by analyzing the statistical data obtained by experiments. All these results are providing new rational strategy with the concept of MgO for MRI and PTT/PDT.
1 September 2019 in Nanoscience and Nanotechnology Letters
Herein we demonstrate tungsten oxide (WO3 nanostructures based resistive type sensors for hydrogen sulfide (H2S) gas sensing utility. The WO3 dynamic layers have been deposited upon alumina substrates pre-patterned with gold (Au) interdigitated electrodes. For comparative study, two distinct WO3 nanostructures (S-425 and S-450) have been synthesized using Aerosol Assisted Chemical Vapor Deposition (AACVD) technique at varied deposition temperatures i.e., 425 and 450 °C, respectively. The gas detecting properties of both sensors were investigated against varied concentration (0-60 ppm) of H2S gas levels. The electrical resistance of fabricated gas detectors has been observed at DC bias of 5 V and low operating temperature 250 °C. Specifically, when concentration of H2S gas increases from 0-10 ppm, average resistance of the S-425 and S-450 gas sensors was observed to decrease by 96.5% and 97.6%, respectively. In general, the sensing mechanism of gas sensors proposed in this work can be associated with ionosorption of oxygen species over WO3 nanostructured surfaces. However, the significantly enhanced sensing performance of S-450 sensor may be attributed to improved crystallinity in its structure and improved ions adsorption/desorption kinetics at nanorods surface morphology.