22 April 2021 in Nature Materials
6 October 2020 in Angewandte Chemie International Edition
Two‐dimensional, Knight‐shifted, T2‐contrasted 23Na magnetic resonance imaging (MRI) of an all‐solid‐state cell with a Na electrode and a ceramic electrolyte is employed to directly observe Na microstructural growth. A spalling dendritic morphology is observed and confirmed by more conventional post‐mortem analysis; X‐ray tomography and scanning electron microscopy. A significantly larger 23Na T2 for the dendritic growth, compared with the bulk metal electrode, is attributed to increased sodium ion mobility in the dendrite. 23Na T2‐contrast MRI of metallic sodium offers a clear, routine method for observing and isolating microstructural growths and can supplement the current suite of techniques utilised to analyse dendritic growth in all‐solid‐state cells.
6 October 2020 in Angewandte Chemie
Two‐dimensional, Knight‐shifted, T2‐contrasted 23Na magnetic resonance imaging (MRI) of an all‐solid‐state cell with a Na electrode and a ceramic electrolyte is employed to directly observe Na microstructural growth. A spalling dendritic morphology is observed and confirmed by more conventional post‐mortem analysis; X‐ray tomography and scanning electron microscopy. A significantly larger 23Na T2 for the dendritic growth, compared with the bulk metal electrode, is attributed to increased sodium ion mobility in the dendrite. 23Na T2‐contrast MRI of metallic sodium offers a clear, routine method for observing and isolating microstructural growths and can supplement the current suite of techniques utilised to analyse dendritic growth in all‐solid‐state cells.
10 September 2026 in Nature Communications
Sulfide solid-state electrolyte films that combine thinness, high ionic conductivity and large-area feasibility are needed to improve energy density and enable industrial-scale production of all-solid-state batteries. However, workable processing methods to integrate these critical features remain technically challenging. Herein, we demonstrate a quasi-dry process utilizing an organic additive (i.e., α-pinene), through which the fabricated sulfide electrolyte films successfully integrate all the aforementioned merits. α-Pinene is chemically compatible with Li5.5PS4.5Cl1.5, improves film flexibility via stress dissipation, enhances ionic conductivity by promoting a more even distribution of the polytetrafluoroethylene binder, and facilitates film densification through lubrication. The resultant films with enhanced densification (porosity reduced from 12.24% to 7.78%) retain over 85% ionic conductivity of the pristine powder, exhibit an ionic conductivity of 4.79 mS/cm at 25 °C, with a thickness of 28 μm and lateral dimensions of 30 × 10 cm2. The Li4Ti5O12 | Li5.5PS4.5Cl1.5 | LiNbO3@LiNi0.8Co0.1Mn0.1O2 full cells present a capacity retention of 93% after 500 cycles at 1 C under 2 MPa. At the stack level, a 50 mAh pouch cell retains 83% capacity after 1000 cycles at 0.5 C under 2 MPa. This work proposes an additive-assisted quasi-dry process, paving a pathway for material-process optimization toward potentially scalable fabrication of all-solid-state batteries.