25 July 2014 in IEEE Revista Iberoamericana de Tecnologias del Aprendizaje
MCMaria del Carmen Curras-Francos
Maria del Carmen Curras-Francos
This paper presents a cooperative project developed by a network of schools and company of different regions of Spain. The project consisted in the development of a home and building automation system for practical teaching in vocational training. The system is based on the Arduino platform to allow the easy development of new applications and hardware modules. This paper also presents the first experiences of practical use at schools. The project has been granted by the Spanish Ministry of Education.
1 June 1998 in Applied Optics
We report the measurement of transient bending waves with double-pulsed-subtraction TV holography. The correlation fringe patterns are automatically quantitatively analyzed by the application of Fourier methods. A novel optical setup with two different object-beam optical paths is demonstrated for the generation of carrier fringes. The proposed system is highly immune to environmental disturbances because the optical setup imposes no lower limit on the time separation between laser pulses. One removes the linear phase distribution due to the spatial carrier in the spatial domain by subtracting the phase of the undeformed carrier fringes from the phase of the modulated fringes. Experimental results obtained with an aluminum plate excited by the impact of a piezoelectric translator are presented.
1 April 2013 in Optical Engineering
We have developed an interferometer for gauge block calibration based on phase shifting algorithms. The measurement process can provide flatness, parallelism, and length. Wavelength values need to be corrected according to the refractive index of air. This correction is obtained indirectly using Edlén’s equation. High-resolution sensors provide the temperature, pressure, and relative humidity readings. To preserve stability, the interferometer is encapsulated in a chamber with active temperature control. Its design, measurement principle, calibration, stability, and reproducibility are analyzed. Since one goal is to employ robust and cheap diode lasers as light sources, we describe the system developed to stabilize a red laser diode using a mode locking technique with a reference gas cell. The instruments and assembly are used to avoid the Doppler effect in the gas cell, which would limit wavelength resolution. Several experiments are carried out to restrict the influence of environmental changes, which affect laser diode frequency.
1 April 2012 in Optics and Lasers in Engineering
12 October 2015 in IEEE Transactions on Instrumentation and Measurement
JVJose Luis Valencia-Alvarez
Jose Luis Valencia-Alvarez
This paper presents a new electronic Vernier fringe counter for the wavelength measurement of a diode laser in a scanning interferometer. The system is intended to be a low cost alternative to commercial systems used for gauge block calibration. The counter stage and phase coincidence detector are made with a microcontroller and high-speed CMOS logic to achieve the required resolution. The microcontroller also can synchronize with other elements to make a fully automated measurement system. This electronic design improves the resolution of the electronic counters in the previous designs.