19 June 2017 in IEEE Access
Transmission, scattering, and absorption by a layer of dielectric cylinders are studied in the context of microwave propagation through vegetation. The electromagnetic fields are calculated by numerical solutions of 3D Maxwell equations (NMM3D) using the method of Foldy-Lax multiple scattering equations combined with the method of the body of revolution (BOR). Using the calculated transmission, we derive, the “tau”, the optical thickness, which describes the magnitude of the transmission. Two cases are considered: the short-cylinder case and the extended-cylinder case. The case of short cylinders is that the lengths of cylinders are much smaller than the layer thickness, while the case of extended cylinders is that the lengths of the cylinders are the same as or comparable to the layer thickness. Numerical results are illustrated for vertically polarized plane waves obliquely incident on the layer of cylinders. The NMM3D results for the extended-cylinder case show large differences of transmission from the results of the other approaches, such as the effective permittivity (EP), the distorted Born approximation (DBA), and the radiative transfer equation (RTE). For the case of short cylinders, the NMM3D results are in close agreement with those of EP, DBA, and RTE.
17 October 2019 in IEEE Journal on Multiscale and Multiphysics Computational Techniques
1 December 2019 in Remote Sensing of Environment
1 January 2017 in Progress In Electromagnetics Research B
The distorted Born approximation (DBA) of volume scattering was previously combined with the numerical solution of Maxwell equations (NMM3D) for rough surfaces to calculate radar backscattering coefficients for the Soil Moisture Active Passive (SMAP) mission. The model results were validated with the Soil Moisture Active Passive Validation Experiment 2012 (SMAPVEX12) data. In this paper we extend the existing model to calculate the bistatic scattering coefficients for each of the three scattering mechanisms: volume, double bounce and surface scattering. Emissivities are calculated by integrating the bistatic scattering coefficients over the hemispherical solid angle. The backscattering coefficients and emissivities calculated using this approach form a consistent model for combined active and passive microwave remote sensing. This has the advantage that the active and passive microwave remote sensing models are founded on the same theoretical basis and hence allow the use of the same physical parameters such as crop density, plant height, stalk orientation, leaf radius, and surface roughness, amongst others. In this paper, this combined active and passive model, DBA/NMM3D, is applied to four vegetation types to calculate both backscattering coefficients and brightness temperature: wheat, winter wheat pasture and canola. This model uses a single-scattering and incoherent vegetation model which is applicable for the vegetation fields studied in this paper but not suitable for vegetation types where collective scattering or multiple scattering effects are important. We demonstrate the use of the DBA/NMM3D for both active and passive using the same input parameters for matching active and passive coincident data. The model results are validated using coincident airborne Passive Active L-band System (PALS) low-altitude radiometer data and Uninhabited Aerial Vehicle Synthetic Aperture Radar (UAVSAR) data taken during the SMAPVEX12 field campaign. Results show an average root mean squared error (RMSE) of 1.04 dB and 1.21 dB for backscatter at V V and HH, respectively, and 4.65 K and 6.44 K for brightness temperature at V-pol and H-pol, respectively. The results are comparable to those from the tau-omega model which is commonly used to compute the brightness temperature, though the physical parameters used in this model are different from the empirically adjusted parameters used in the tau-omega model.
1 January 2020 in Progress In Electromagnetics Research