The present work proposes a nonlinear model of a buck–boost DC-DC power converter considering the nonlinear magnetic characteristics of the power inductor and electrical losses of the system. The Euler–Lagrange formalism is used for formulating the proposed model. Previous research works have reported mathematical models to describe power inductor dynamics. However, a gap in the literature remains regarding modeling this kind of element when it operates within power converters. Also, a linear-based controller scheme is proposed to regulate a non-ideal buck–boost DC-DC power converter. A methodology for tuning the proposed controller is presented, which considers the nonlinear model structure of the power converter, the linearization procedure based on an identification process, and a frequency domain analysis based on the approximated linear model. Finally, the tuned control scheme is tested on the nonlinear model of the power converter under several operational conditions showing excellent performance by effectively regulating the output voltage. The results are compared with those derived from alternative control strategies, and a better performance is generally obtained.
In this paper, the speed control of a series DC motor is presented together with the electronics necessary to ensure inverse motion. The control law is based on the classical PI controller and the noise reduction disturbance observer (NRDOB). This control strategy allows the use of a linear approximation of the motor dynamics due to its excellent properties regarding model uncertainties, sensor noise, and external perturbations. Consequently, a linear model based on the nonlinear modelling with magnetic saturation of the motor is also presented. The NRDOB-based control frequency-domain approach allows for the treating of structured and unstructured disturbances in the spirit of classical control theory. Although PI controllers have proved to provide excellent performance and robustness for the speed control of series DC motor, it cannot cope, without affecting or reducing the performance, with the effects of sensor noise; moreover, to further improve the performance, especially in tracking conditions, it is necessary to design and implement a power driver capable of generating inverse motion. In addition, because NRDOB is in fact an internal model control strategy, a perfect match between process and model is not required. That is, contrary to the common belief that the NRDOB is a 2-DOF, it is in fact a 3-DOF control scheme. Based on these characteristics, it was possible to design and implement a robust high-performance speed control system with reverse motion for the non-linear series DC motor with not well-defined relative degree, together with the electronics required for the reverse motion which is fully described. This results in a control system capable of overcoming the problems generated by input disturbances and sensor noise, ensuring robustness and performance in tracking and regulation conditions. Real-time experimental results are included in support of the approach presented here.