28 April 2020 in IEEE Systems Journal
21 May 2020 in IEEE Journal of Photovoltaics
Solar photovoltaic (SPV) array does not give constant power output due to the adverse effects of various stresses over its performance. Dust is a critical affecting factor, especially in tropical, arid, and semiarid regions, as it reduces power output by lowering the transmittance of the glass cover. Usually, total dust accumulation on an SPV module goes through three processes viz., deposition, rebound, and re-suspension. In this article, a detailed analysis of all these phenomena has been carried out to build up a comprehensive model for dry deposition of dust to assess power output reduction for this. Variations of all these processes for particles with different diameters and modules at various tilt angles have also been investigated. The model shows that transmittance becomes minimum at a tilt angle of about 15°, which is validated by laboratory experimentation. The deviation between measured and the model-based calculated dust deposition density is found to be 4.84%. The energy output of 10 kWP PV power plant has been calculated with this model with weather data collected from a weather monitoring station (at latitude 22.5713°N, longitude 88.3109°E) and dust data from a website of Government of India. Daily generated energy in this plant for 15 days is recorded by a digital meter and compared with the calculated ones. The deviation between the two is seen to be within ±6%.
12 May 2021 in IEEE Journal of Photovoltaics
Dust is the cause of generation reduction of solar photovoltaic (SPV) modules from the day it is installed. Its deposition depends on geographical location of a module where it is installed, due to difference in meteorological events, causing variation in generation efficiency. In an earlier article, the dry deposition processes are modeled in which effects of relative humidity (RH) and precipitation are not considered. In this article, a more generalized mathematical model for dust deposition under varying humidity and precipitation condition is developed. The increase in deposition with different RH has been investigated using the developed model demonstrating an appreciable effect. The contribution of different types of precipitation is also included. The model based observations are utilized to calculate the energy generation under different meteorological events over a specific period and compared with the measured ones over the same time span from a 10 kW p SPV power plant at IIEST, Shibpur. The deviations are found to be within ±6% establishing the efficacy of the model.