A novel electrolyte approach for a lithium-sulfur secondary battery is presented, realistically portrayed on pouch cell level, with its decisive element being a new electrolyte system, a mixture of a hydrofluoro ether and sulfolane. The hereby suppressed polysulfide solubility enables high discharge capacities and requires only very low electrolyte excess (< 2.6 μL mgS−1) achieving high coulomb efficiencies above 94% (capacity retention of 77% over 40 cycles) without the necessity of adding lithium nitrate for shuttle suppression. Due to the low volatility, this adopted electrolyte concept promises significant benefits for large operational battery units.
A low‐density electrolyte composition is introduced for lithium–sulfur (Li–S) batteries with intrinsic and effective polysulfide shuttle suppression. Hexyl methyl ether (HME) is used in combination with 1,3‐dioxolane (DOL) as a solvent for the Li–S battery electrolyte. The choice of solvent limits the dissolution of polysulfides, leading to successful suppression of the parasitic polysulfide shuttle. Hence, high coulombic efficiencies of 98% can be obtained in coin cells for over 50 cycles. The impact of the specifically adapted electrolyte solvent is studied systematically by varying solvent combinations in order to enable the development of light innovative shuttle suppressing electrolytes. In contrast to concepts relying on hydrofluoro ether dilution, the presented electrolyte features a significantly reduced mass density at 2 m lithium bis(trifluoromethanesulfonylimide) (LiTFSI) conductive salt enabling significant weight reduction on the Li–S prototype cell level, thus, allowing energy densities up to 400 Wh kg−1.
Novel cathode, electrolyte and separator concepts are expected to improve the capacity retention and cycle life of lithium-sulfur batteries by avoiding the dissolution of polysulfide-intermediates into the electrolyte or preventing their diffusion to and reaction with the lithium metal anode. However, their intrinsic evaluation is obscured by ill-defined degradation mechanisms of the lithium counter electrode due to electrolyte and polysulfide consumption during reformation of the solid electrolyte interface. Herein, we introduce symmetric lithium sulfide – sulfur cells to study the “cathode" specific degradation mechanisms of the cathode/electrolyte/separator-system in order to differentiate cathode-, separator, and electrolyte and lithium metal anode degradation. Two identical carbon/sulfur-composite cathodes, either of them one at first lithiated versus lithium, are assembled in a coin cell versus each other. The virtue of this test cell design is demonstrated evaluating prime shuttle-suppression concepts, namely a Nafion-coated polyolefin separator and a sparingly polysulfide-solvating electrolyte. We conclude that symmetric lithium sulfide – sulfur cells provide a valuable methodology to analyze the intrinsic capacity decay and cycle life of cathodes for lithium-sulfur cells with limited solvation and/or blocking of polysulfides, and it is an essential strategy to distinguish cathode from lithium anode degradation.