4 January 2021 in IEEE Internet of Things Journal
Industrial Internet of Things (IIoT) is an emerging area that fifth-generation (5G) mobile communication system penetrates industrial manufacturing applications. The indoor factory has larger space and there are a lot of metal machine tools distributed in it, which makes its radio propagation characteristics and corresponding channel models significantly different from those of the indoor office and indoor hotspot. To support the design and the evaluation of the IIoT techniques, the 3rd Generation Partnership Project (3GPP) released the first 5G IIoT standard model in October 2019. In this article, we give a detailed explanation of this IIoT model and compare it with other indoor models. First, we introduce the standardization of 3GPP IIoT channel model and its motivation. Second, four IIoT subscenarios, which are classified according to the clutter density and antenna height, are described. Third, the potential frequency bands of 5G IIoT are summarized. Fourth, the models of channel parameters, including the path loss and the line-of-sight (LOS) probability, the root mean-square (RMS) delay spread, and the angular spread, are given. Among them, the models of path loss and LOS probability take the antenna height and clutter density into consideration. The model of RMS delay spread changes from frequency-dependent to volume-dependent in order to catch the size variation of factories. Finally, two newly added key channel characteristics, dual mobility and absolute time of arrival, which help to describe the robot movement and positioning, are also presented.
14 September 2010 in International Journal of Wireless Information Networks
18 December 2019 in IEEE Access
This paper proposes a measurement based modeling of D-band indoor channels. Different indoor environments were considered including Line-of-Sight (LOS) and Non Line-of-Sight (NLOS) conditions. Double steering at the transmitter and receiver sides was performed allowing angular characterization of the channel. Path loss, delay spread, angular spread, intra- and inter- cluster characteristics were also modeled. These characteristics were then compared to the ones obtained in other millimeter wave bands for the same environment.
12 June 2023 in IEEE Journal of Selected Topics in Signal Processing
Next-generation wireless networks will see the convergence of communication and sensing, also exploiting the availability of large bandwidths in the Terahertz (THz) spectrum and electrically large antenna arrays on handheld devices. In particular, it is envisaged that user devices will be able to automatically scan their surroundings by steering a very narrow antenna beam and collecting echoes reflected by objects and walls to derive a map of indoors and infer users' trajectories using simultaneous localization and mapping (SLAM) techniques. In this paper, we address this scenario by proposing original radio- SLAM (R-SLAM) algorithms, derived from image processing techniques, to map the environment and pinpoint the device position in the map starting from measurements sensed by a mobile THz radar. Initially, to fully understand the THz backscattering phenomenon, we provide an experimental characterization of the THz backscattering channel in indoor environments. Then, the performance of the proposed algorithms is assessed using realworld THz radar measurements and is compared with state-ofthe- art SLAM techniques, demonstrating the superiority of the proposed approaches.
19 January 2011 in Annals of Telecommunications
15 March 2021 in IEEE Access
In the automotive and rail domains, vehicles are entering the era of full automation thanks to wireless sensors and communication systems, shifting control functions from a human driver to computers. High data rate, robustness, high reliability and ultra-low latency wireless communications are required in the context of autonomous train and safety critical applications. Today, the Future Railway Mobile Communication System (FRMCS) is under development at European level within the International Union of Railways (UIC). This system will answer all the current and future needs of rail. It will be IP based, multi-bearer and resilient to technology evolution. In the context of the development of different FRMCS prototypes by industry, it is crucial to be able to test them in representative Railway radio environments thanks to laboratory tools. Characterization of radio channels in railway environments, by measurements or simulations, is a very active field. In this article, based on broad literature survey, we show that not all the published models are suitable for performance evaluation. Then, we propose a selection of typical Tapped-Delay-Line channel models to be implemented in an original hardware and software testing platform capable to reproduce the effect of representative Railway environments in laboratory, with real time emulation at RF (Radio Frequency) level. Preliminary results in Hilly 3 taps and Cutting 5 taps channel models are presented as a proof of concept of a “zero on site testing” approach, allowing for time and cost savings in the validation of railway communication systems.