Progress in the field of machine learning has enhanced the development of self-adjusting optical systems capable of autonomously adapting to changing environmental conditions. This study demonstrates the concept of self-adjusting optical systems and presents a new approach based on reinforcement learning methods. We integrated reinforcement learning algorithms into the setup for tuning the laser radiation into the fiber, as well as into the complex for controlling the laser-plasma source. That reduced the dispersion of the generated X-ray signal by 2–3 times through automatic adjustment of the position of the rotating copper target and completely eliminated the linear trend arising from the ablation of the target surface. The adjustment of the system was performed based on feedback signals obtained from the spectrometer, and the movement of the target was achieved using a neural network-controlled stepper motor. As feedback, the second harmonic of femtosecond laser radiation was used, the intensity of which has a square root dependence on the X-ray yield. The developed machine learning methodology allows the considered systems to optimize their performance and adapt in real time, leading to increased efficiency, accuracy, and reliability.
We have studied the dependence of X-ray radiation yield in the range of more than 3 keV from a microchannel in a copper target on the laser pulse number at a (0.7?4.0) × 1014 W cm-2 intensities of femtosecond laser radiation. A technique for estimating the intensity of laser radiation acting on the target using the slope of the X-ray bremsstrahlung spectrum is proposed. A possibility of using this technique for estimating the intensity in a femtosecond laser filament is considered.
1 November 2020 in Journal of Physics: Conference Series
We have performed theoretical calculations aimed at modeling the propagation dynamics of a focused femtosecond laser beam in a nonlinear gas medium. It was obtained that when helium is blown into the focal area, the intensity clamping level is about 2,5 times higher than when air is present. The conditions for optimal placement of the target relative to the position of the vacuum focus and, accordingly, allowing to achieve maximum intensity are found. It was found that under interaction in air femtosecond Cr:forsterite laser ( λ=1,24 μm, E<1 mJ, 100 fs) with nanostructured iron containing tape the intensity clamping effect is observed. Replacing the air medium with helium leads to essentially increase in line (6.4keV) X-ray yield. Increasing the pulse duration to 300fs led to an increase in the X-ray output twice and reached 3*105 photons/pulse in solid angle.
Efficient laser-plasma line X-ray source was developed. X-ray generation was optimized by the laser pulse duration alteration and using the local helium blowing into the microplasma region on a copper target located in atmospheric conditions. Measured Kα x-ray flux of 2·107 ph/pulse/2π sr and conversion efficiency of 10-5 were achieved correspondingly. Keywords: femtosecond laser pulses, X-rays.
Efficient laser-plasma line X-ray source was developed. X-ray generation was optimized by the laser pulse duration alteration and using the local helium blowing into the microplasma region on a copper target located in atmospheric conditions. Measured Kα X-ray flux of 2 × 107 ph/pulse/2π sr and conversion efficiency of 10–5 were achieved correspondingly.