13 April 2023 in Mechanics and Advanced Technologies
The technological preparation of production (TPV) is one of the key stages of the product life cycle (LPL) when designing and developing new aircraft engines. The TPV system foresees the use of the following instruments: CAD/CAM/CAE systems to ensure the implementation of the following operations: automated design, production and engineering calculations; Product Data Management systems (PDM) to ensure product data management; Enterprise resource planning (ERP) systems for the corporate resource planning. Note that the instruments above are combined into PLM-systems to provide information support for the TPV system. The paper reviews the experience of designing and implementing the integrated TPV system at Motor Sich JSC for the purpose of manufacturing new aircraft engines. The author presents a structural diagram of the implemented integrated system containing a complex of interdependent subsystems along with a description of the system of automated design of process documents, which provides for the on-line design of production processes. The paper gives a description of subsystem of automated preparation of programs for CNC machine tools, which is designed to calculate the trajectory of the cutting tool when machining geometrically complex parts of aircraft engines. The paper specifies the subsystem of automated design of technological equipment, which is in compliance with requirements for modern tool production. The author underlines that the system of automated design of production equipment saw the following design subsystems reaching the highest level of development: subsystems for designing cutting and gear machining tools; subsystems for designing machine tools; subsystems for designing the monitoring and metering instrument; subsystems for designing foundry and stamping equipment; subsystems for designing control of gear cutting tools as per electronic standards. It is noted that the automated subsystems of analyzing production processes allow for performing the following analyses: analyzing metal casting processes; analyzing stamping processes; analyzing cutting processes; analyzing gear-cutting processes. The author provides the following results of implementing the integrated system of technological preparation of production at Motor Sich JSC: i) The TPV period was increased by 1.2–1.5 times, and ii) The efficiency of design and construction works was raised by 3–3.5 times.
31 October 2024 in New Materials and Technologies in Metallurgy and Mechanical Engineering
Purpose. Development of optimal technology for welding thin-walled shells mode of 12Х18Н10Т steel (δ=0.15 mm), working at alternating loads. Research methods. Research methods. For welding automatic argon-arc welding (AAAW) equipment was used for of orbital welding, which includes a MW 2600 current source (FRONIUS) with software control unit and welding head of closed type MW40. Research warks showed that this type of welding is not enough for such small thicknesses concentration of the welding arc, which does not allow stable forming of the bath and obtaining solid uniform seam. A special robotic complex was used for microplasma welding STARWELD 190H, which includes: a power source for the regular arc INV 50; source main arc power supply INV 190; SIEMENS Simatic S 7-300 control unit; robot CR3-535M (MITSUBISHI); manipulator and HPH 80 plasmatron. Welding quality control was carried out by visual inspection and metallographic examination. Taking into account the conditions of operation of the parts, according to the technical conditions of the drawing, it was also provided pneumohydraulic control method. Obtained results. Visual inspection the outer surface of the welds showed the absence of defects in the form of pores, cracks, shells, no fusions, undercuts, etc. The geometric dimensions of the weld met the requirements of the standard documentation valid at the enterprise. Metallographic studies of the boxes membranes, welded by microplasma welding, gave a positive result. Defects of metallurgical character were not found in the welds. Practical value. The optimal method of welding that can be applied is determined for the manufacture of thin-walled membrane structures, from the point of view of manufacturability and economy expediency It has been established that microplasma welding allows obtaining a hermetically tight seam, when the thickness of parts to be welded is about 0.15 mm. The performance of welded membrane boxes is confirmed in the barostatic valve of an aircraft engine. It is established that micro plasma welding can be used in the manufacture of thin-walled shells made of 12X18H10T steel (δ=0.15 mm), which work at variable loads. The technological process of welding is introduced into the series production.
19 March 2024 in Mechanics and Advanced Technologies
The paper presented examines the composition, the structure and properties of samples made from the XH50VMTJuB-VI (hereinafter EP648-VI) alloy obtained by using the selective laser melting process (the SLM-process) in relation to manufacturing parts for aviation purposes. The authors carried out a comparative study of the samples’ structure and properties upon conducting such operations as depositing in two directions (horizontal and vertical), separate heat treatment and after hot isostatic pressing (HIP) followed by a standard heat treatment process applied for deformable semi-finished products made from the XH50VMTJuB-VI(EP648-VI) alloy. The authors inform that the manufacturing of samples by means of the SLM-process involved powders obtained through the technology of the vacuum-induction spraying of the molten metal jet with an inert gas (argon). The paper has established that samples obtained by using the HIP process with the application of the heat treatment (a vacuum high-temperature homogenization followed by a long-term aging) demonstrated the best set of mechanical properties, since the implemented complex process ensured the “healing” of pores and discontinuities in the structure, and strengthening by means of the intermetallic g¢-phase, while separations of the excess, needle-shaped a -Cr phase are fine and evenly distributed in the material structure. The authors noted that mechanical properties of samples under analysis were generally in compliance with the requirements set forth in the regulatory documentation for deformable semi-finished products made from the XH50VMTJuB-VI (EP648-VI) alloy, while underlining the increase in the level of impact strength of samples that underwent the HIP process, and the long-term strength of samples manufactured in the vertical direction compared to other options studied. Following the results of the analysis, the authors established that the SLM-process made it possible to manufacture products whose level of mechanical properties was close to the level of the deformable material, and even exceeded it in some cases.