Nowadays, body temperature screening is very important especially in the current global coronavirus disease (COVID-19) epidemic. It can be considered as the first step in monitoring the fever symptom if the body temperature is checked regularly. Aiming at alleviating the influence of working distance and ambient temperature disturbance, this article proposes and demonstrates a self-compensation technique that is built into our low-cost thermal imaging-based temperature screening system. The key idea relies on a combination of a 3-D depth sensor, an electronic temperature sensor, and a reference temperature for realtime data feedback and control. In addition, we obtain simple mathematical models for compensating the influence of ambient temperature and measuring distance variations. Experimental demonstration using a blackbody radiation source as an object confirms that the measured temperature under our self-compensation agrees very well with the blackbody radiation source, showing a very low standard deviation of 0.10 °C under 21.0 °C–40.0 °C ambient temperature. In addition, an improved standard deviation of 0.18 °C and a low 0.020 °C/m for the measured temperature are obtained under the variation in measuring the distance from 0.50 to 2.00 m.
Random numbers are important in many activities, including communication, encryption, science, gambling, finance, and decision making. There is a strong demand for a hardware random number generator that could support cryptographic applications. In this work, we propose a quantum tunneling diode as a source of true randomness achieved by applying electrical current sweeps through the device and then harnessing a time-counting unit to measure fluctuation of current flows. Our approach can be implemented with inexpensive electronics and could be integrated into systems that require random numbers such as portable communication devices.
As fast human temperature screening is needed in large public areas, this paper proposes a low-cost mobile platform module that combines the advantages of analyzing visible and thermal images. In particular, the key idea relies on face detection in the visible image. Then the coordinates of all faces detected are mapped on to the thermal image to determine their corresponding temperatures. Internal temperature compensation and external reference temperature also are employed to reduce the unwanted temperature fluctuation inside the module and in the surrounding environment. Our mobile platform module, called $\unicode{x00B5} {\rm Therm}$, uses a FLIR ONE camera as our visible and thermal imaging cameras. It can simultaneously determine the temperatures of nine people at a speed of 8 frames/second. A field test operation was performed for four days with 1,170 people, with very promising results of 100% sensitivity, 92.6% specificity, and 92.7% accuracy.
Small-tilt micromirror-based 2x2 fiber optic switch array structures are proposed using fixed mirrors and fiber interconnections. A multiwavelength 2x2 fiber optic switch based on this small-tilt micromirror is experimentally demonstrated. The key innovation in this architecture is the use of a specially located fixed mirror to form a symmetric 2x2 retroreflective switching structure. These 2x2 fiber optic switch structures can also provide a fault-tolerant design using a macropixel approach. A two-dimensional digital micromirror device (2D-DMD) from Texas instruments (Ti) designed to operate in the visible band is used to represent the small-tilt micromirrors in our experimental demonstration. Multiwavelength switch operation is characterized by changing the operating wavelength of the tunable laser. The measured average optical coherent crosstalk is -22 dB with ±0.9 dB fluctuation over 40 nm, limited by the on-off ratio of the 2D-DMD. The measured average optical loss is 14.8 dB at a 1.55?m operating wavelength, limited by the visible wavelength design TI 2D-DMD, three-port optical circulators, fiber adapters, and free-space-to-fiber coupling efficiency.
This paper shows for the first time how a mobile device such as a smart cell phone and a tablet can be used to realize such a highly-sought-after high-resolution digital microscope. Demonstration based on a low-cost molded plastic convex lens combined with our design packaging style shows that a portable digital microscope can be easily implemented featuring a measured high image resolution of >; 4.40 μm and a measured field of view of 5×5 mm 2 . Applications include biology study, skin analysis, and pest detection, to name just a few.