Junifa Layla Sihombing

Junifa Layla Sihombing

Auto-generated profile, based on publicly available information

Junifa Layla Sihombing

Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Negeri Medan, Medan, Indonesia

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 January 2020 in Catalysts
Verified
Journal Article
Open access
PDF file
JSJunifa Layla Sihombing
Junifa Layla Sihombing
SGSaharman Gea
Saharman Gea
BWBasuki Wirjosentono
Basuki Wirjosentono
HAHarry Agusnar
Harry Agusnar
APAhmad Nasir Pulungan
Ahmad Nasir Pulungan
YHYasir Arafat Hutapea
Yasir Arafat Hutapea
This research was aimed to investigate the effect of Co and Co-Mo metal loaded on Sarulla Natural Zeolite which has been activated and calcined (SNZ-Cal) as supports for better understanding of characterization and catalytic activity on hydrocracking of MEFA rubber seed oil. The Co and Co-Mo metal was added through a wet impregnation method using Co(NO3)2·6H2O and (NH4)·6Mo7O24·4H2O precursor salts. The catalyst was oxidized at 500 °C for 2 h within oxygen gas flow, followed by a reduction process with H2 gas flow with similar condition to obtain the catalysts. Based on the result, it was found that the resulted catalysts displayed an increase in crystal grain size compared to the metal-free catalyst. Particularly, catalyst that was impregnated with Co metal has a larger surface area and pore diameter and smaller pore volume than Co-Mo metal impregnated to the catalyst. In fact, it was revealed that this catalyst possessed the highest catalytic activity and selectivity. Furthermore, the resulting gas products reached 64 wt.% and the distribution of biogasoline fraction of hydrocarbons (C6-C12) amounted to 83.19 wt.%.

16 June 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
SGSaharman Gea
Saharman Gea
AHAgus Haryono
Agus Haryono
AAAndriayani Andriayani
Andriayani Andriayani
JSJunifa Layla Sihombing
Junifa Layla Sihombing
APAhmad Nasir Pulungan
Ahmad Nasir Pulungan
YHYasir Arafat Hutapea
Yasir Arafat Hutapea
Constituents of liquid smoke possess a huge potential to be converted as value-added chemicals, such as flavoring, antiseptics, antioxidants, or even fossil oil substitutes. However, liquid smoke instability, led by the presence of oxygenate compounds, is an obstacle for further utilization and processing. On the other hand, catalyst efficiency in hydrodeoxygenation (HDO) remains challenging. Sarulla natural zeolite (Z), with abundant availability, has not been comprehensively investigated in the catalytic performance of HDO. In this study, Sarulla natural zeolite with different Si/Al ratios, which are activated by several concentrations of hydrochloric acid and nickel supported by Z (Ni-Z) synthesized by wet impregnation, were evaluated for HDO of liquid smoke, particularly in reducing oxygenate compounds. Catalyst morphology, surface area, pores, and crystallinity are investigated. Catalytic performances were evaluated, particularly on reducing oxygenate compounds and the shifting of phenol and its derivatives. Furthermore, the liquid smoke product of HDO was analyzed by gas chromatography-mass spectrometry (GC-MS). The data obtained reveal that the HDO process of liquid smoke with the Z3 catalyst shows the best activity compared to Z5 and Z7, with phenol conversion of 62.39% and 11.93% of alkoxy reduction. Meanwhile, the best Ni metal catalyst system activity was given by the Ni-Z5 catalyst compared to Ni-Z3 and Ni-Z7, where phenol conversion and alkoxy reduction were at 60.06% and 11.49%, respectively.

14 December 2018 in AIP Conference Proceedings
Verified
Conference Paper
Closed access
PDF file
JSJunifa Layla Sihombing
Junifa Layla Sihombing
SGSaharman Gea
Saharman Gea
APAhmad Nasir Pulungan
Ahmad Nasir Pulungan
HAHarry Agusnar
Harry Agusnar
BWBasuki Wirjosentono
Basuki Wirjosentono
YHYasir Arafat Hutapea
Yasir Arafat Hutapea
The identification of morphology and structure of Natural Zeolite from Sarulla, Tapanuli Utara, Indonesia had been conducted. The X-ray diffraction (XRD) analysis indicated that the natural zeolite had a difractogram peak of 20-30° θ. Moreover, the XRD pattern showed that the dominant phases of the zeolite were containing mordenite and clinoptilolite crystal. Fourier Transform Infrared (FTIR) spectroscopy indicated that TO4 ([SiO4]−4and [AlO4]−5 groups appeared in the wavenumber of 1040.61 cm−1 and shifted to 1053.15 cm−1 after the acid activation and calcination process. In addition, the characterization through Scanning Electron Microscopy (SEM) method indicated that there was no significant difference in morphological surface among the samples. Then, the gas absorption analysis through Brunauer-Emmett and Teller (BET) method indicated that there was an increasing trend of surface area, pore volume and pore diameter from Sarulla Natural Zeolite (SNZ) to Sarulla Natural Zeolite–Acid Activated (SNZ-AA) and Sarulla Natural Zeolite–Calcinated (SNZ-Cal) and indicated as mesoporous materials.

27 January 2022 in International Journal of Energy and Environmental Engineering
Verified
Journal Article
Closed access
PDF file
SGSaharman Gea
Saharman Gea
IRIrvan
Irvan
KWKarna Wijaya
Karna Wijaya
ANAsma Nadia
Asma Nadia
APAhmad Nasir Pulungan
Ahmad Nasir Pulungan
RARahayu
Rahayu

1 January 2021 in Polish Journal of Environmental Studies
Verified
Journal Article
Closed access
APAhmad Nasir Pulungan
Ahmad Nasir Pulungan
AKAgus Kembaren
Agus Kembaren
NNNurfajriani Nurfajriani
Nurfajriani Nurfajriani
FSFeri Andi Syuhada
Feri Andi Syuhada
JSJunifa Layla Sihombing
Junifa Layla Sihombing
RRRahayu Rahayu
Rahayu Rahayu
The conversion of biodiesel from rubber seed oil has been carried out using heterogeneous catalyst based on natural zeolite. The methods used include activated and calcined to produce active natural zeolite (ZAA). ZAA are embodied metal oxides of PbO, ZnO, and ZrO2 through wet impregnation to produce bifunctional catalyst. The catalysts activity test was carried out in biodiesel synthesis at temperature 60 degrees C for 60 minutes with 5%(w/w) catalysts. Crystallinity of catalysts increased after the activation process and ZrO2 loaded but decreased after PbO and ZnO loaded. The catalyst components after modification decreased Al levels due to dealumination process as well as reduced impurities. Spesific surface area of catalysts decreased after impregnation while total pore volume increased. Metal oxides loaded has an effect in increasing biodiesel conversion and reducing FFA content. The best performance was shown by ZrO2/ZAA catalysts with yield conversion of 58.10% and FFA conversion to methyl ester reaches 86.22%. The characteristics of water content, FFA content, and density of 0.092%, 1.081%, and 0.880 g/cm(3), respectively. These data showed that biodiesel from rubber seed oil which was catalyzed by a bifunctional catalyst has the potential to be developed as an alternative source of future renewable and environmentally friendly fuels.

27 February 2023 in Journal of Advanced Research in Fluid Mechanics and Thermal Sciences
Verified
Journal Article
Open access
PDF file
JSJanter Pangaduan Simanjuntak
Janter Pangaduan Simanjuntak
BTBisrul Hapis Tambunan
Bisrul Hapis Tambunan
JSJunifa Layla Sihombing
Junifa Layla Sihombing
This article aims to review the potential and feasibility of pyrolytic oil from plastic waste (POPW) as a substitution fuel for conventional fossil fuels. Pyrolytic oil can be generated from plastic waste through the thermal cracking process. In addition to overcoming the global plastic waste problem, recovering plastic waste into alternative fuels can also reduce the consumption of fossil-based fuels. The research on POPW production and utilization of internal combustion engines (ICE) was reviewed and discussed to determine their potential and suitability for fuel substitution. Currently, plastic materials can be easily found in various product packaging, ranging from food and beverage packaging to shopping bags and appliances. When they are no longer utilized, this plastic becomes garbage and will be very harmful to humans and the environment. Therefore, it needs a correct way to proceed and minimize the impact caused by plastic waste. In fact, there are seven types of plastic waste in the polymer groups that must be handled via the pyrolysis process to avoid plastic pollution. literature survey, research on POPW via the pyrolysis process, and its usage is thoroughly found to be booming and growing very rapidly. Co-pyrolysis is known to be the most potential and suitable way to produce high-quality POPW, which is suitable to be used to fuel the ICE and also the stationary industrial engine.