Wenlong Qi

Wenlong Qi

Auto-generated profile, based on publicly available information

Wenlong Qi

Electrical and Electronics engineering, University of Hong Kong, 25809 Hong Kong Hong Kong

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 September 2015 in IEEE Transactions on Power Electronics
Verified
Journal Article
Open access
Sinan LiSinan Li
Sinan Li
WQWenlong Qi
Wenlong Qi
STSiew Chong Tan
Siew Chong Tan
SHS. Y. Hui
S. Y. Hui
Existing methods of incorporating an active filter into an AC/DC converter for eliminating electrolytic capacitors usually require extra power switches. This inevitably leads to an increased system cost and degraded energy efficiency. In this paper, a concept of active-filter integration for single-phase AC/DC converters is reported. The resultant converters can provide simultaneous functions of power factor correction, DC voltage regulation, and active power decoupling for mitigating the low-frequency DC voltage ripple, without an electrolytic capacitor and extra power switch. To complement the operation, two closed-loop voltage-ripple-based reference generation methods are developed for controlling the energy storage components to achieve active power decoupling. Both simulation and experiment have confirmed the eligibility of the proposed concept and control methods in a 210-W rectification system comprising an H-bridge converter with a half-bridge active filter. Interestingly, the end converters (Type I and Type II) can be readily available using a conventional H-bridge converter with minor hardware modification. A stable DC output with merely 1.1% ripple is realized with two 50-μF film capacitors. For the same ripple performance, a 900-μF capacitor is required in conventional converters without an active filter. Moreover, it is found out that the active-filter integration concept might even improve the efficiency performance of the end converters as compared with the original AC/DC converter without integration.

1 March 2014
Verified
Conference Paper
Closed access
WQWenlong Qi
Wenlong Qi
HWHui Wang
Hui Wang
XTXingguo Tan
Xingguo Tan
GWGuangzhu Wang
Guangzhu Wang
KNKhai D. T. Ngo
Khai D. T. Ngo
This paper proposes a new topology for a pulse width modulation (PWM) rectifier which can achieves both sinusoidal input current on the ac side and ripple power decoupling on the DC side without additional switches. The AC inductor of the conventional H-bridge circuit is divided into two parts and only an auxiliary decoupling capacitor is added in the proposed circuit. Control scheme is also proposed for the circuit working as unity power factor rectifier. Compared with other decoupling circuits, this circuit has the same advantage such as high power density. Due to no additional switches, the proposed circuit has higher efficiency. Effectiveness of the circuit is validated by simulation.

29 March 2017 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
Sinan LiSinan Li
Sinan Li
WQWenlong Qi
Wenlong Qi
STSiew Chong Tan
Siew Chong Tan
SHS. Y. Hui
S. Y. Hui
Existing control schemes for single-phase ac-to-dc converters with active power-decoupling function typically involve a dedicated power-decoupling controller. Due to the highly coupled and nonlinear nature of the single-phase system, the design of the power-decoupling controller (typically based on the small-signal linear control techniques) is cumbersome, and the control structure is complicated. Additionally, with the existing power-decoupling control, it is hard to achieve satisfied dynamic responses and robust circuit operation. Following a recently proposed automatic-power-decoupling control scheme, this paper proposes a nonlinear control method that can achieve enhanced large-signal dynamic responses with strong disturbance rejection capability without the need for a dedicated power-decoupling controller. The proposed controller has a simple structure, of which the design is straightforward. The control method can be easily extended to other single-phase ac-to-dc systems with active power-decoupling function. Simulation and experimental results validate the feasibility of the proposed control method on a two-switch buck-boost PFC rectifier prototype.

3 September 2018 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
HYHuawei Yuan
Huawei Yuan
Sinan LiSinan Li
Sinan Li
WQWenlong Qi
Wenlong Qi
STSiew Chong Tan
Siew Chong Tan
SHShu-Yuen Ron Hui
Shu-Yuen Ron Hui
In this paper, a nonlinear controller is presented for regulating an emerging class of high power density, high power-conversion efficiency, and high reliability (H 3 ) single-phase power converters featuring small buffering capacitors. The proposed controller combines the best features of input-output feedback linearization and an automatic-power-decoupling (APD) control strategy, and achieves enhanced dynamic performances as compared to existing solutions based on linear control techniques. By feedback linearization, the plant models of H 3 single-phase converters are fully linearized and decoupled, and thus fast dynamics, large-signal asymptotic tracking, and global stability can be achieved with simple linear controllers. Additionally, the APD strategy further strengthens the robustness of the closed-loop system as active pulsating power buffering (of the instantaneous power difference between the ac-port and the dc-port of the converter) of basically any form can be achieved. With the proposed nonlinear controller, we are able to further exploit the potential and unlock several new features intrinsic in H 3 single-phase converters, e.g., active voltage holdup function, allowing extended holdup time (comparable to existing products with large dc-link capacitors) with only a small energy storage. The general theory, design procedures, and practical considerations of the nonlinear controller are detailed. A 100-W hardware prototype is also built to demonstrate the advantages of the proposed solution. New opportunities of H 3 single-phase power converters with the aid of the proposed nonlinear control are also suggested for future research.

19 June 2017 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
WQWenlong Qi
Wenlong Qi
Sinan LiSinan Li
Sinan Li
STSiew Chong Tan
Siew Chong Tan
SHS. Y. R. Hui
S. Y. R. Hui
Conventional hysteresis-modulation-based sliding-mode (SM) controller exhibits a varying switching frequency. Existing SM controllers for achieving constant-switching-frequency operation often have complicated structures and/or are less straightforward to design to meet different steady state, transient, and loading requirements. In this paper, a new direct SM voltage controller based on parabolic modulation (PM) is proposed and applied to a buck converter. The objective is to achieve constant-switching-frequency operation of a switching converter with simple control structure and good operating performance. Both theoretical study and experimental work on a buck converter show that the proposed PM-based SM control can achieve 1) constant switching frequency in the continuous-conduction mode (CCM) and quasi-constant switching frequency in the discontinuous-conduction mode (DCM) of operation, 2) inherent input-disturbances rejection and superior reference tracking performance, and 3) seamless mode transition between CCM and DCM.

2 February 2017 in IEEE Transactions on Power Electronics
Verified
Journal Article
Open access
Sinan LiSinan Li
Sinan Li
WQWenlong Qi
Wenlong Qi
STSiew Chong Tan
Siew Chong Tan
SHS. Y. Hui
S. Y. Hui
CTChi K. Tse
Chi K. Tse
Starting with a brief review on the existing methods of impedance emulation, this paper addresses a general and systematic approach to programmable and reconfigurable emulation of power impedances. The proposed approach not only enables the impedance value to be programed, but also allows the characteristics (i.e., type) of the impedance to be reconfigured instantly during the operation. Based on the proposed control method, emulation of at least six types of emulated power impedances (EPI) can be easily attained. In particular, it is theoretically and practically demonstrated that the impedance characteristic can be emulated through a combination of different functions. The systematic derivation of these functions is explained. New techniques that compensate the circuit power losses are introduced. This general approach has been practically verified in several EPI. Both steady-state and dynamic performance of these EPI confirm the programmability and reconfigurability. It is envisaged that the proposed method can be applied to a range of functions, such as power filtering, energy storage, and even power conversion based on direct impedance control.