In order to solve the problem of waste heat collection from energy consumption, a thermal energy generation device combining shape memory alloy and piezoelectric materials has been designed. The shape memory alloy is heated and deformed to drive the drive wheel continuously, and the impact wheel is deformed against the piezoelectric cantilever beam during the rotation of the drive wheel to generate electricity. In this paper, the impact force generated by the impact wheel and the output voltage of the piezoelectric cantilever beam during the rotation process are given. Finally, the experimental test shows that the larger the radius of the drive wheel, the lower the impact force of the wheel and the lower the output voltage of the piezoelectric cantilever beam; the larger the diameter of the shape memory alloy wire, the higher the impact force of the wheel and the higher the output voltage of the piezoelectric cantilever beam; the more teeth of the drive wheel, the higher the impact frequency of the piezoelectric cantilever beam and the higher the output voltage. The maximum output voltage of the thermoelectric converter is 14.2 V, when the drive wheel radius is 13 mm, the shape memory alloy wire diameter is 1 mm and the number of impact wheel teeth is 6. The new structural design provides a new structural model for waste heat recovery and thermal energy generation technology. The new structural design provides a new approach and idea for waste heat recovery and thermal energy generation technology.
Since the piezoelectric energy harvester will generate strain zero point when it is bent, it will affect the power generation effect. In this paper, the strain zero point of the cantilever beam of the rectangular piezoelectric energy harvester is studied through theoretical analysis. The main analysis is the specific location of the strain zero point in the first-, second-, and third-order modes of the cantilever beam of the energy capturer. The results of the theoretical analysis are verified by experimenting with different segmentation methods of piezoelectric energy harvesters. The experimental results show that the piezoelectric energy harvester is segmented at 0.275 in the length direction of the piezoelectric ceramic in the second-order mode, and the output power is 5 times that of the nonsegmented state. In the third-order mode, the piezoelectric energy harvester is segmented at 0.16 and 0.61 in the length direction of the piezoelectric ceramic, and the output power is 5.83 times that of the nonsegmented state. The research in this paper provides new ideas and methods for improving the power generation capacity of piezoelectric energy harvesters.
With the popularization of integrated circuits, MEMS, and portable electronic devices, chemical batteries have many disadvantages as the main energy supply method, such as large size, high quality, and limited energy supply life, requiring regular replacement, resulting in waste of materials, environmental pollution, and other issues. From the above reasons, energy harvesting technology plays an important role in improving the efficiency and life of electronic equipment. In order to explore the influence of the bimorph piezoelectric vibrator’s structural parameters on the power generation capacity, this paper establishes a cantilever beam rectangular bimorph piezoelectric vibrator power generation model, derives the mathematical expression of the bimorph piezoelectric vibrator power generation, and determines the parameter factors that affect the power generation effect. Using MATLAB simulation analysis to obtain the influence relationship curve of system output voltage and structural parameters, the experiment tests the influence law of output voltage and thickness ratio, width‐to‐length ratio, and Young’s modulus ratio; the test results are consistent with the theoretical analysis, verifying the theory and the correctness of the analysis. The results show that when the thickness ratio is 0.58 and the width‐to‐length ratio is 1, the power generation effect of the piezoelectric vibrator is the best to reach 14.5V; the power generation capacity of the transducer is inversely proportional to Young’s modulus ratio. This research provides a new idea for the popularization of integrated circuits, MEMS, and portable electronic devices.
14 June 2022 in Advances in Materials Science and Engineering
In order to investigate the optimal power generation performance of piezoelectric materials, a spin-magnetic piezoelectric generator was designed and the relationship between output voltage and speed and external force was derived through theoretical analysis. The maximum deformation and resonant frequency of the piezoelectric oscillator under magnetic drive are derived from simulation analysis. Finally, the relationship between output voltage and magnet size, distance between two magnets, and speed was tested experimentally, and the experimental data agreed with the theoretical analysis. The results show that when the speed is 312 r/min, magnet pitch is 12 mm, and magnet size is 10 mm 35 mm 4, the maximum output voltage is 54 V. This can meet the power supply needs of micro and small electronic products.